Getting any IR remote to work with the RockPro64 ?
#1
Hello.

I'm running libreelec on my RockPro64. I'm currently controlling it using yatse on my phone but I would like to use my amp IR remote. 
I plugged an IR receiver module on the appropriate socket on the board, I set up kodi to work with my amp remote (using the instructions from librelec wiki) but the remote doesn't work.
It seems that there is no IR driver loaded.

Code:
LibreELEC:~ # ir-keytable
/sys/class/rc/: No such file or directory
No devices found


The receiver module is a 38KHz TSOP4838, which works perfectly on my Raspberry Pi3's GPIO with the same remote.
Is it possible to get IR-keytable to work on the board ?
Any help would be hugely appreciated !
  Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  rockpro64 13 megapixel camera Aycaramba 7 632 10 hours ago
Last Post: Atch
  Has anyone used an Intel Solid-State Drive 660p Series with the RockPro64? erols 1 89 10 hours ago
Last Post: Atch
  case for RockPro64 + PCI-E M.2 NVMe Card? AndyOfLinux 8 617 08-24-2019, 01:52 PM
Last Post: kaylios
  UART ttyS2 on RockPro64 for custom communication meier 2 87 08-22-2019, 06:35 AM
Last Post: meier
  Rockpro64 Sata Card kills itself jerry110 12 1,653 08-21-2019, 01:52 AM
Last Post: aldrick
  ROCKPro64 with 16 ports SATA controller ZeblodS 15 539 08-11-2019, 02:00 AM
Last Post: stuartiannaylor
  Help with getting a Marvell 9230 to work epoliqui 6 459 07-12-2019, 12:18 PM
Last Post: Meatball
  RockPro64 pcie Gpu Davidos 4 375 06-23-2019, 12:33 AM
Last Post: tllim
  RockPro64 UPS for in car use nJoy. 2 242 06-19-2019, 09:00 AM
Last Post: ender_saved
Photo Question on the RockPro64 RK3399 GPIOs... Faradn 4 363 04-17-2019, 07:38 PM
Last Post: Faradn

Forum Jump:


Users browsing this thread: 1 Guest(s)