flash image to sd/emmc through ethernet
#1
Hello every body,
  I followed the tutorial "Step by step guide PXE diskless configuration (with pxe-boot)", and it worked -almost- fine with debian image (error because root account disabled ... no console) but not with ubuntu container image (error during boot) . Then I have a question, is there a way to :
0. make a network directory with a minimal system and create a directory containing an image
1. boot the system with pxe-boot from ethernet
2. get the information on hardware (and specifically sd/emmc card)
3. flash the image saved on a network on it
4. reboot

?

Thank you for your help

My network is compound of :
- a rockpro64 (with eventually a ssd on the pcie)
- 3 rock64
- 2 networks (one local and one access to internet)
  Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  USB -> eMMC is now available. Luke 15 6,359 07-27-2019, 04:27 PM
Last Post: tllim
  4 Uarts and 2 Ethernet possiblities gops 9 369 06-27-2019, 03:47 PM
Last Post: richardk
  No green Ethernet LED sanis 2 172 03-06-2019, 11:21 PM
Last Post: sanis
Brick How to Write an Image to the eMMC Module Tutorial MarkHaysHarris777 55 23,797 02-06-2019, 04:02 PM
Last Post: tllim
  Rock64 scipy, numpy, scikit-image, matplotlib issue with pip3 ictele 0 142 02-05-2019, 05:41 PM
Last Post: ictele
  No Boot, Red Green and White flash at 1 sec intervals wesleykonrad 2 266 01-28-2019, 11:54 PM
Last Post: wesleykonrad
  HW image transitions in Python gaggleoxfoggy 7 667 11-24-2018, 10:41 AM
Last Post: gaggleoxfoggy
  Receiving errors about eMMC (?) acasta 10 1,619 08-20-2018, 04:41 PM
Last Post: asavah
  Card emmc Auggoncalves 2 344 06-25-2018, 03:20 AM
Last Post: Auggoncalves
  New User - No image file in LibreELEC download Frogmella 9 803 06-11-2018, 01:01 PM
Last Post: Frogmella

Forum Jump:


Users browsing this thread: 1 Guest(s)