04-02-2019, 06:47 PM
> but how to does one access the "u-boot console"?
Access is via "uart".
Using this method, you get the output as shown in the #1 post above, and you can control it.
For example, access from other PCs using the following items.
https://www.pine64.org/?product=padi-serial-console
The "u-boot" currently released for "rock64" does not provide any other way to control "u-boot".
The "boot-method" depends on the distribution (eg Ayufan/Armbian etc).
So you should clearly indicate which image you are considering using.
Otherwise, you will not get a useful response for you.
Access is via "uart".
Using this method, you get the output as shown in the #1 post above, and you can control it.
For example, access from other PCs using the following items.
https://www.pine64.org/?product=padi-serial-console
The "u-boot" currently released for "rock64" does not provide any other way to control "u-boot".
The "boot-method" depends on the distribution (eg Ayufan/Armbian etc).
So you should clearly indicate which image you are considering using.
Otherwise, you will not get a useful response for you.