Armbian for Rock64
#41
(01-21-2022, 12:27 PM)gedas07 Wrote:
(01-20-2022, 08:12 PM)Rocklobster Wrote:
(01-18-2022, 12:57 PM)gedas07 Wrote: hello I have installed rock64 armbian debian bullseye, on the emmc card and I have an ssd disk by usb3, the disk is mounted in /etc/fstab, but every day approx it gives me an error
  blk_update_request: critical target error, dev sda, sector 250069504 op 0x0SadREAD) flags 0x0 phys_seg 1 prio class 0
[18241.624593] Buffer I/O error on dev sda, logical block 31258688, async page read
I have tried several discs and it happens to all of them
Is there something to be able to install so that I don't get that error
Thanks a lot

Do you have another computer you could use to check the integrity of  your SSD drives. Possibly a faulty batch. Alternatively could you install the Armbian Buster distribution and try that. Bullseye is known to be quite buggy at the moment.
Thanks for your answer
But the ssd, it worked perfectly, a day before with ubuntu 18, but with bullseye it gives those I/O failures

I have put another different ssd and after a few days it gives the same error

Try Armbian Buster so. If you can rule out OS issues you'll narrow it down to hardware issues.

Just a thought. How are you powering the SSD. You may not have enough capacity on your power supply if you are powering it from the board. Any dip in power usually leads to undercurrent voltage and will throw errors typically on storage devices
  Reply
#42
(01-22-2022, 08:43 AM)Rocklobster Wrote:
(01-21-2022, 12:27 PM)gedas07 Wrote:
(01-20-2022, 08:12 PM)Rocklobster Wrote:
(01-18-2022, 12:57 PM)gedas07 Wrote: hello I have installed rock64 armbian debian bullseye, on the emmc card and I have an ssd disk by usb3, the disk is mounted in /etc/fstab, but every day approx it gives me an error
  blk_update_request: critical target error, dev sda, sector 250069504 op 0x0SadREAD) flags 0x0 phys_seg 1 prio class 0
[18241.624593] Buffer I/O error on dev sda, logical block 31258688, async page read
I have tried several discs and it happens to all of them
Is there something to be able to install so that I don't get that error
Thanks a lot

Do you have another computer you could use to check the integrity of  your SSD drives. Possibly a faulty batch. Alternatively could you install the Armbian Buster distribution and try that. Bullseye is known to be quite buggy at the moment.
Thanks for your answer
But the ssd, it worked perfectly, a day before with ubuntu 18, but with bullseye it gives those I/O failures

I have put another different ssd and after a few days it gives the same error

Try Armbian Buster so. If you can rule out OS issues you'll narrow it down to hardware issues.

Just a thought. How are you powering the SSD. You may not have enough capacity on your power supply if you are powering it from the board. Any dip in power usually leads to undercurrent voltage and will throw errors typically on storage devices
Hello, if the ssd has an external source, to be powered, so it is not the problem, what I said with ubuntu 18 was a year and it works perfect.
Switch to debian to stay up to date,
What image of buster do you recommend to try?

thanks
  Reply
#43
(01-23-2022, 06:20 AM)gedas07 Wrote:
(01-22-2022, 08:43 AM)Rocklobster Wrote:
(01-21-2022, 12:27 PM)gedas07 Wrote:
(01-20-2022, 08:12 PM)Rocklobster Wrote:
(01-18-2022, 12:57 PM)gedas07 Wrote: hello I have installed rock64 armbian debian bullseye, on the emmc card and I have an ssd disk by usb3, the disk is mounted in /etc/fstab, but every day approx it gives me an error
  blk_update_request: critical target error, dev sda, sector 250069504 op 0x0SadREAD) flags 0x0 phys_seg 1 prio class 0
[18241.624593] Buffer I/O error on dev sda, logical block 31258688, async page read
I have tried several discs and it happens to all of them
Is there something to be able to install so that I don't get that error
Thanks a lot

Do you have another computer you could use to check the integrity of  your SSD drives. Possibly a faulty batch. Alternatively could you install the Armbian Buster distribution and try that. Bullseye is known to be quite buggy at the moment.
Thanks for your answer
But the ssd, it worked perfectly, a day before with ubuntu 18, but with bullseye it gives those I/O failures

I have put another different ssd and after a few days it gives the same error

Try Armbian Buster so. If you can rule out OS issues you'll narrow it down to hardware issues.

Just a thought. How are you powering the SSD. You may not have enough capacity on your power supply if you are powering it from the board. Any dip in power usually leads to undercurrent voltage and will throw errors typically on storage devices
Hello, if the ssd has an external source, to be powered, so it is not the problem, what I said with ubuntu 18 was a year and it works perfect.
Switch to debian to stay up to date,
What image of buster do you recommend to try?

thanks

Try Armbian Focal if you need a desktop. Try Armbian Buster if server is all you need. You can download both from here https://wiki.pine64.org/index.php/ROCK64...MC_Boot.5D
  Reply
#44
Thanks a lot.
  Reply
#45
Hello, is Armbian currently the best/more stable linux server image for Rock64?
  Reply
#46
(02-08-2022, 08:23 PM)va88 Wrote: Hello, is Armbian currently the best/more stable linux server image for Rock64?

Probably the most widely used and in my case very stable.
  Reply
#47
finally install armbian buster, and install my rock64, the lxde desktop, when I'm in desktop mode I have black lines that flash horizontally on the screen every x seconds.
Is there something to install and that does not come out?
  Reply
#48
(02-28-2022, 11:44 AM)gedas07 Wrote: finally install armbian buster, and install my rock64, the lxde desktop, when I'm in desktop mode I have black lines that flash horizontally on the screen every x seconds.
Is there something to install and that does not come out?

Sorry to hear that. Have you installed latest?

There is a release just today happening. I don't know if anything specific has been addressed there (but you could check the release announcement).

Either wait a day or so and download new image, or you can build now yourself if you don't want to wait.

Let us know how it goes. Maybe make a post on Armbian forum if problems persist, likely much better chance of being seen there.
  Reply
#49
(02-28-2022, 02:22 PM)TRS-80 Wrote:
(02-28-2022, 11:44 AM)gedas07 Wrote: finally install armbian buster, and install my rock64, the lxde desktop, when I'm in desktop mode I have black lines that flash horizontally on the screen every x seconds.
Is there something to install and that does not come out?

Sorry to hear that.  Have you installed latest?

There is a release just today happening.  I don't know if anything specific has been addressed there (but you could check the release announcement).

Either wait a day or so and download new image, or you can build now yourself if you don't want to wait.

Let us know how it goes.  Maybe make a post on Armbian forum if problems persist, likely much better chance of being seen there.

Where I can find the image ? and Is it possible to install it without losing anything already installed?
  Reply
#50
(03-01-2022, 03:59 PM)gedas07 Wrote: Where I can find the image ?

OK, in general:

https://www.armbian.com/download/

But you will notice it's not listed.  You can still manually go to https://www.armbian.com/rock64/ however, but here we must note a few very important things:
  • It's CSC (no support).  This is a red flag.
  • There is a link to a forum thread about stability.
  • There is another note about eMMC troubles.

At this point I am wondering which image Rocklobster is using?  Did you build?  Because I see a lot of red flags here.

Are you sure Rocklobster you are referring to Rock64 (and not ROCKPro64)?  I just want to be sure.

(03-01-2022, 03:59 PM)gedas07 Wrote: Is it possible to install it without losing anything already installed?

Generally speaking, this is not supported.  However there are some people on the forums telling how to do this.  You would be on your own however.

But there seem to be much bigger problems here, proceed with caution!

I knew this sounded vaguely familiar.  I see gedas07 that you found your way to make this post.  I would advise to keep looking around the forums there and see if anyone found a solution.  Otherwise we are into development and bug fixing here.
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  slarm64 (unofficial slackware) Rock64 RK3328 (aarch64) mara 123 108,831 06-01-2022, 11:26 AM
Last Post: mara
  USB3.0 Issues at DietPi(Armbian) #22.02.1 t4_4t 1 282 04-05-2022, 08:18 PM
Last Post: helpmerock
  Fedora 35 on rock64 dafsjr 4 1,011 03-19-2022, 10:03 PM
Last Post: t4_4t
  openwrt for the rock64 wilsonYan 29 12,900 03-13-2022, 10:25 PM
Last Post: CanadianBacon
  Armbian 22.02 Release Announcement TRS-80 0 294 02-28-2022, 05:06 PM
Last Post: TRS-80
  Home Assistant Supervisor for rock64 karbon17 4 1,039 02-23-2022, 10:12 AM
Last Post: karbon17
  RetroPie on Rock64 Luke 41 48,352 12-27-2021, 01:37 PM
Last Post: Mrfixit2001
  Rock64 CRUX-ARM (aarch64) mara 1 1,436 12-21-2021, 04:16 PM
Last Post: mara
  DietPi OS for ROCK64 MichaIng 33 11,166 11-28-2021, 02:37 PM
Last Post: MichaIng
  rock64-debian-mrfixit-190531.img.xz : missing /usr/lib/dri/rockchip_dri.so popi 5 2,593 08-12-2021, 04:55 AM
Last Post: igorp

Forum Jump:


Users browsing this thread: 2 Guest(s)