Boot Problems, LEDs lit continuously
#8
Hello, I have now tried the ROCK64 read out serially. I use a FTDI FTD232 (This one) for this purpose. I have Linux installed on my Raspberry Pi. I also tried with Windows and Putty. Short on my approach:

1.) Connect Rx from the Rock64 (pin 10) to the Tx of the adapter
2.) Connect Tx from the Rock64 (pin 8) to the Rx of the adapter
3.) Connect ground together (pin 6)
4.) Plug adapter into USB port (LED on the adapter lights up)
5.) Open terminal and enter: "dmesg | tail -n 10"
6.) He tells me that the adapter is connected to ttyUSB0 (Screenshot)
7.) Then I enter: "sudo minicom -s -D / dev / ttyUSB0 -b 1500000 --color = on"
8.) Then set 1500000 8n1 in the settings and turn off flow control
9) Leave the config and it appears the surface, now I turn on the Rock64 and nothing happens except the 2 funny characters.
10.) Do I have to jump any pins?


       


Messages In This Thread
RE: Boot Problems, LEDs lit continuously - by Facecreator - 04-30-2018, 11:06 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Rock64 u-boot for eMMC Build Error mexicanflyer 0 90 09-18-2022, 02:29 PM
Last Post: mexicanflyer
  Boot from SPI first mjnck 0 604 12-31-2021, 11:23 AM
Last Post: mjnck
  rock64, compile problems "illegal instruction", "memory fault" -> ddr_333Mhz? klausfelix 0 1,019 07-02-2021, 03:13 PM
Last Post: klausfelix
  boot hdd usb3 philipe 1 1,797 01-27-2021, 02:12 PM
Last Post: tllim
  Rock64 v2 as Openmediavault server - buffers / shutdown problems helpmerock 2 2,658 12-29-2020, 09:46 AM
Last Post: helpmerock
  rock64, compile problems "illegal instruction", "memory fault" -> ddr_333Mhz? hunderteins 10 10,542 11-17-2020, 08:00 AM
Last Post: Johannes
  Libreelec Rock64 - 4GB no boot spiker15 3 3,117 11-02-2020, 12:36 AM
Last Post: wilsonYan
  Rock64 - boot helpmerock 2 2,504 10-08-2020, 01:29 PM
Last Post: helpmerock
  No boot up after power on Whoopsadaisy 4 4,049 09-26-2020, 05:14 PM
Last Post: simonsouth
Bug u-boot (forks) status mcerveny 14 10,561 08-27-2020, 01:44 PM
Last Post: globaltree

Forum Jump:


Users browsing this thread: 1 Guest(s)