What is name of gpio hardware on a rock64?
#1
The driver code checks for it, and will return a valid answer if its a bcm2709, bcm2835, bcm2836, or a bcm2837. Code is:
Code:
#define CPUINFO_BUFSIZE (16*1024) // Should be large enough for now
static platform_t check_platform(void)
{
FILE *fp;
char *buf;
size_t fsize;
platform_t rv = RPI_UNSUPPORTED;

if(!(buf = rtapi_kmalloc(CPUINFO_BUFSIZE, RTAPI_GFP_KERNEL))) {
rtapi_print_msg(RPSPI_ERR, "hm2_rpspi: No dynamic memory\n");
return RPI_UNSUPPORTED;
}
if(!(fp = fopen("/proc/cpuinfo", "r"))) {
rtapi_print_msg(RPSPI_ERR, "hm2_rpspi: Failed to open /proc/cpuinfo\n");
goto check_exit;
}
fsize = fread(buf, 1, CPUINFO_BUFSIZE - 1, fp);
fclose(fp);

// we have truncated cpuinfo return unsupported
if(!fsize || fsize == CPUINFO_BUFSIZE - 1) {
rtapi_print_msg(RPSPI_ERR, "hm2_rpspi: Platform detection memory buffer too small\n");
goto check_exit;
}

/* NUL terminate the buffer */
buf[fsize] = '\0';

if(strstr(buf, "BCM2708")) {
rv = RPI_1;
} else if(strstr(buf, "BCM2709")) {
rv = RPI_2; //for RPI 3 too
} else if(strstr(buf, "BCM2835")) { // starting with 4.8 kernels revision tag has board details
char *rev_val = strstr(buf, "Revision");
if(rev_val) {
char *rev_start = strstr(rev_val, ": ");
unsigned long rev = strtol(rev_start + 2, NULL, 16);

if(rev <= 0xffff)
rv = RPI_1; // pre pi2 revision scheme
else {
switch((rev & 0xf000) >> 12) {
case 0: //bcm2835
rv = RPI_1;
break;
case 1: //bcm2836
case 2: //bcm2837
rv = RPI_2; // peripheral base is same on pi2/3
break;
default:
break;
}
}
}
}

check_exit:
rtapi_kfree(buf);
return rv;
}

And all the c style indenting has been stripped, so how do I post code?  This sucks.



Thanks everybody.

Cheers, Gene83
  Reply
#2
gpio is a function of the soc [rockchip 3328]
  Reply
#3
Thank you very much.

Cheers, gene83
  Reply
#4
If you wish to verify that /proc/cpuinfo contains the board model, you better verify that first, because in some kernels, the name won't appear.
Some other way to do that is to verify /proc/device-tree/model ...
  Reply
#5
The only place I can find that is in /proc/device-tree/spi@ff190000 and that isn't explicit.

There are rockchip, and rk3328's scattered here and there but I've no clue how volatile they may be. But they I think hold the most promise, but it a whole new kilobyte of prelude code to get there, and I haven't hacked on c code in 25 years. Complicated by my wet ram turning 83 yo today.

Cheers & thanks, martinayotte

Gene83
  Reply
#6
On my board, doing "cat /proc/device-tree/model" returns "PINE64 ROCK64".
  Reply
#7
Whereas I get:Rockchip RK3328 Rock64

Without an eof or eol. And which would appear to be a valid ID.

Thanks. Not working on the code yet, morning here and I'm still a quart low on coffee. :-)

Cheers martinayotte, gene83
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  openwrt for the rock64 wilsonYan 3 1,368 11-29-2020, 11:30 PM
Last Post: yura407
  slarm64 (unofficial slackware) Rock64 RK3328 (aarch64) mara 99 33,654 11-25-2020, 12:28 AM
Last Post: mara
  RetroPie on Rock64 Luke 40 18,720 10-31-2020, 07:12 AM
Last Post: BigSkyEntertainment
  RETRO-GAMING: UPDATED RELEASE OF RECALBOX FOR THE ROCK64 Mrfixit2001 30 14,436 10-20-2020, 04:36 PM
Last Post: lewellyn
  Lakka (retrogaming) os for rock64 Wizardknight 2 552 09-21-2020, 07:18 PM
Last Post: Wizardknight
  Debian (Vanilla) on Rock64 and eMMC - how ? as365n4 4 831 09-21-2020, 04:33 AM
Last Post: as365n4
Sad Rock64 crash randomly during usb 3 copy with RAID1 drive phalae 24 12,741 09-14-2020, 10:48 AM
Last Post: BrownLuther007
  Arch Linux ARM on the Rock64 V3 justinweiss 2 974 08-24-2020, 05:16 PM
Last Post: justinweiss
  Hardware acceleration using FFmpeg gusarg81 0 438 08-21-2020, 01:36 PM
Last Post: gusarg81
  Rock64 Rev3 doesn't boot and leds blinking fast dishins 3 1,190 08-16-2020, 07:42 AM
Last Post: aclaret

Forum Jump:


Users browsing this thread: 1 Guest(s)