How to Write an Image to the eMMC Module Tutorial
#46
(09-03-2017, 12:10 PM)MarkHaysHarris777 Wrote:
(09-03-2017, 07:43 AM)z4v4l Wrote: Why installation is not done by just like this:
1) insert an SD card card with the "minimal" linux.
2) snap an empty eMMC in
3) turn the board on, boot from SD
4) download an image and flash it into eMMC by that smartass script.

I know it's obvious and hardly nobody could think of it before, rather there are some obstacles to do so. What they are?


Hi, the reason your simplified approach will not work is that boot precedence and eMMC initialization create two problems which prevent it.  If there is an image on the eMMC already, then the eMMC will boot 'first'.  If there is no image on the eMMC then either the machine will not boot, or if it does boot,  both devices will not be 'seen' by the OS during initialization; both mmcblk0 and mmcblk1 must be present, AND the machine has to be booted from SD.

The jumper used has one function,  it grounds the clock line of the eMMC, deactivating it temporarily;  that way the SD card will boot-up because (for all intents and purposes) the eMMC is not there.  We interrupt the boot-up at the uboot timer and then continue the bootup with the jumper removed--  this allows the boot-up to continue on SD, but also allows the OS to 'see' the eMMC module during initialization.

Thanks for the question.

In my view the need for this extremely complicated installation process is a major design flaw. I would have expected to be able to plug in a USB stick prepared in such a way the system would boot off the USB stick and transfer the OS image to the eMMC and that would be it.

At no point during the purchase process it was brought to my attention that I would need to purchase extra hardware to actually be able to install the system purchased (ROCK64, power supply and 64GB eMMC). I find it unacceptable that I need to purchase extra hardware with an additional shipping cost and waiting time, just to install it.

Would it be possible to install Linux on the eMMC after having installed Android on the eMMC using the simpler installation method? If not, I'll probably return my ROCK64 as it would be useless to me.


Messages In This Thread
RE: How to Write an Image to the eMMC Module Tutorial - by MofTot - 11-07-2017, 07:48 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Rock64 u-boot for eMMC Build Error mexicanflyer 0 1,065 09-18-2022, 02:29 PM
Last Post: mexicanflyer
Thumbs Up USB3.0 to eMMC Adapter... MattDralle 2 2,970 10-28-2021, 12:20 PM
Last Post: tllim
  Pine Rock64 eMMC lifespan moonspell79 3 3,717 08-19-2021, 06:46 PM
Last Post: bcnaz
  Download IDB fail when trying to flash Android image cherkasoff 0 4,311 04-05-2020, 07:41 AM
Last Post: cherkasoff
  Receiving errors about eMMC (?) acasta 11 15,863 09-24-2019, 10:26 PM
Last Post: ridgarou
  USB -> eMMC is now available. Luke 15 29,073 07-27-2019, 04:27 PM
Last Post: tllim
  Rock 64 network error as soon as I try to write or read. georgegohl888 1 2,981 03-12-2019, 09:35 AM
Last Post: georgegohl888
  Rock64 scipy, numpy, scikit-image, matplotlib issue with pip3 ictele 0 2,015 02-05-2019, 05:41 PM
Last Post: ictele
  flash image to sd/emmc through ethernet LMM 0 2,280 02-04-2019, 07:36 AM
Last Post: LMM
  HW image transitions in Python gaggleoxfoggy 7 7,964 11-24-2018, 10:41 AM
Last Post: gaggleoxfoggy

Forum Jump:


Users browsing this thread: 2 Guest(s)