09-26-2023, 02:01 AM
Hello,
I have been trying to get adb to work on my Pinephone. The current UBPorts build ships adbd:
https://gitlab.com/ook37/pinephone-pro-d...=heads#L31
My understanding is, that "Developer mode" and switching to/back from it is taken care od by usb-moded:
https://gitlab.com/ook37/pinephone-pro-d...=heads#L38
This requires configuration, as documented in https://gitlab.com/ubports/development/c...wikis/home
My current problem is to find these configuration values for the PinePhone(s). Ideally for all editions.
I have tried looking through the forums, this is what I found:
* https://forum.pine64.org/showthread.php?tid=16087
This thread seems to end with "you shouldn't want adb anyway", but that doesn't really answer my problem: I do want to enable adb, and I think I should be able to.
I thought I might be able to pull this configuration from an AOSP image, since it seemed like the PinePhone Pro came with one pre-installed.
I have looked for it in this thread: https://forum.pine64.org/showthread.php?...705&page=2 but as mentioned in the last message, the links are now dead.
I have also looked for it in both
https://wiki.pine64.org/wiki/PinePhone_S...e_Releases
and
https://wiki.pine64.org/wiki/PinePhone_P...e_Releases
Neither page seems to have it. pine64-pinephone-plamo-beta-factorytest.img.xz is a postmarketOS image
So my questions are:
- Where can I look for these configuration values?
- Does anyone have an AOSP image for any of the PinePhones?
I have been trying to get adb to work on my Pinephone. The current UBPorts build ships adbd:
https://gitlab.com/ook37/pinephone-pro-d...=heads#L31
My understanding is, that "Developer mode" and switching to/back from it is taken care od by usb-moded:
https://gitlab.com/ook37/pinephone-pro-d...=heads#L38
This requires configuration, as documented in https://gitlab.com/ubports/development/c...wikis/home
My current problem is to find these configuration values for the PinePhone(s). Ideally for all editions.
I have tried looking through the forums, this is what I found:
* https://forum.pine64.org/showthread.php?tid=16087
This thread seems to end with "you shouldn't want adb anyway", but that doesn't really answer my problem: I do want to enable adb, and I think I should be able to.
I thought I might be able to pull this configuration from an AOSP image, since it seemed like the PinePhone Pro came with one pre-installed.
I have looked for it in this thread: https://forum.pine64.org/showthread.php?...705&page=2 but as mentioned in the last message, the links are now dead.
I have also looked for it in both
https://wiki.pine64.org/wiki/PinePhone_S...e_Releases
and
https://wiki.pine64.org/wiki/PinePhone_P...e_Releases
Neither page seems to have it. pine64-pinephone-plamo-beta-factorytest.img.xz is a postmarketOS image
So my questions are:
- Where can I look for these configuration values?
- Does anyone have an AOSP image for any of the PinePhones?