08-20-2022, 07:12 PM
I am in the exact same boat. I don't understand - every image besides Manjaro doesn't want to boot, I realize Manjaro gets the best kernel/fw support but whatever.
Anyways, to fix this behavior, I did the following:
DO NOT try and use a generic image from the Manjaro website. It did not work for me. Maybe you will fare better.
Grab a release image from https://github.com/manjaro-arm/pbpro-images/releases ;
Using an eMMC to USB reader (I have an ODROID one):
Or extract the xz and use a utility like balenaEtcher.
Seat the eMMC, screw down the back (do NOT try and operate the lid hinge while the bottom shell of the machine is off), open the lid, and boot up.
Anyways, to fix this behavior, I did the following:
DO NOT try and use a generic image from the Manjaro website. It did not work for me. Maybe you will fare better.
Grab a release image from https://github.com/manjaro-arm/pbpro-images/releases ;
Using an eMMC to USB reader (I have an ODROID one):
Code:
xz -d Manjaro-...-pbpro-XX.XX.img.xz
dd if= Manjaro-..-pbpro-XX.XX.img of=/your/eMMC/mountpoint bs=1024mSeat the eMMC, screw down the back (do NOT try and operate the lid hinge while the bottom shell of the machine is off), open the lid, and boot up.