05-03-2021, 01:44 PM
Have you tried to toggle the hardware switch for the modem (switch #1)?
If that does not work the next thing I would try is to flash an OS to a uSD and boot from it to see if it recognizes the modem.
If it still is not booting you may want to look at a firmware recovery method:
https://wiki.pine64.org/wiki/PineModems#...e_Recovery
(There are 2 ways to unlock the bootloader, I recommend shorting the pins rather than the ADB method but it depends on what's easiest for you.)
https://github.com/Biktorgj/quectel_eg25...ery#readme
I broke my modem's firmware a while back and managed a reasonable recovery using Biktorgj's procedure.
Cheers!
If that does not work the next thing I would try is to flash an OS to a uSD and boot from it to see if it recognizes the modem.
If it still is not booting you may want to look at a firmware recovery method:
https://wiki.pine64.org/wiki/PineModems#...e_Recovery
(There are 2 ways to unlock the bootloader, I recommend shorting the pins rather than the ADB method but it depends on what's easiest for you.)
https://github.com/Biktorgj/quectel_eg25...ery#readme
I broke my modem's firmware a while back and managed a reasonable recovery using Biktorgj's procedure.
Cheers!
