broken connector-pin for the accu
#1
Hallo together,
after 3 weeks testing the phone with different OS - today happend a tiny damage with substantial effect.
The left of 4 contacts broke and the phone is sadly unusable.
When I look at the expanded mainboard I think it would be possible to replace the contact-group by soldering. But where to get such part? Or must I buy a new PCB?
  Reply
#2
https://wiki.pine64.org/wiki/PinePhone_c...#P.6_POWER

You're looking for J600 - it seems like there might be at least 2 manufacturers. As to where to get them in small quantities, I'm not sure. You can try your local equivalent of Mouser, DigiKey, RS, Farnell, Newark etc. or see what's on offer on Ali, ebay etc.
  Reply
#3
Hi,
to be honest i doubt that you will be able to get the original part somewhere.

... but i had a closer look at the connector and tried to find out some specs to search for possibly equivalent parts.
So it seems the pitch of the battery connector is metric -> 2.5mm.
Obviously it's a part with 4 activ contacts and 2 solder joints... and it's a 90° type.

I found this one at Digikey:
https://www.digikey.de/product-detail/de...ND/2001013

This is no exact replacement, but you may consider this as a reference for further investigations Shy

Good luck!
scholbert
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Main Board Swap: Camera connector problems tyha 5 962 11-19-2020, 06:25 PM
Last Post: pajux
  Wobbly USB-C connector? pregier 5 1,261 10-16-2020, 10:22 AM
Last Post: wibble
  Broken Speakers and Microphone virnuik 0 506 09-12-2020, 11:34 AM
Last Post: virnuik
  broken emmc nieral 7 2,221 08-26-2020, 09:24 AM
Last Post: nieral
  Touchscreen broken on arrival [*now with video*] ozzeruk 10 3,424 08-06-2020, 09:59 AM
Last Post: HLing
Bug USB Type-C connector overmold conflicts with the back cover ngkz 1 965 05-10-2020, 12:19 AM
Last Post: tllim

Forum Jump:


Users browsing this thread: 1 Guest(s)