Flashing SC card for Ubuntu Touch
#1
Hello,

I'm a NOOB. I have an Ubuntu computer and a Windows 10 computer. I have also had a stroke. I have just bought my Pinephone with Manjaro on it, but it has Postmarket OS on it instead. I want to flash my phone, but am not sure how to do it. I followed the following instructions:

Detailed usage instructions
  1. Download the Jumpdrive image
  2. Flash the Jumpdrive image to a micro SD card
  3. Boot the PinePhone from the Jumpdrive micro SD card
  4. Connect the PinePhone to your computer using USB-A -> USB-C cable
  5. Flash the exposed PinePhone drive (e.g. /dev/mm..., check for the right device in dmesg, GNOME disks, or similar, and make sure it's unmounted) with your chosen OS image
  6. Once the flashing process is complete, disconnect the PinePhone from your PC, power it down and remove the Jumpdrive SD card
  7. The process is now finished, and you can boot from eMMC
I got the Jumpdrive image on my pinephone saying that it's ready to go but then (point 5) I'm not sure. How do I flash my pinephone? Do I use etcher? Also, which computer is easier, the Ubuntu or the Windows?

Many thanks,

Chris
#2
(11-19-2020, 07:12 AM)thorensjubilee Wrote: Hello,

I'm a NOOB. I have an Ubuntu computer and a Windows 10 computer. I have also had a stroke. I have just bought my Pinephone with Manjaro on it, but it has Postmarket OS on it instead. I want to flash my phone, but am not sure how to do it. I followed the following instructions:

Detailed usage instructions
  1. Download the Jumpdrive image
  2. Flash the Jumpdrive image to a micro SD card
  3. Boot the PinePhone from the Jumpdrive micro SD card
  4. Connect the PinePhone to your computer using USB-A -> USB-C cable
  5. Flash the exposed PinePhone drive (e.g. /dev/mm..., check for the right device in dmesg, GNOME disks, or similar, and make sure it's unmounted) with your chosen OS image
  6. Once the flashing process is complete, disconnect the PinePhone from your PC, power it down and remove the Jumpdrive SD card
  7. The process is now finished, and you can boot from eMMC
I got the Jumpdrive image on my pinephone saying that it's ready to go but then (point 5) I'm not sure. How do I flash my pinephone? Do I use etcher? Also, which computer is easier, the Ubuntu or the Windows?

Many thanks,

Chris
With Ubuntu, just double click on the manjaro image. It will open the built in disk copying program. Be sure to select the sd card and not your harddrive. It will ask you to confirm twice before doing it.
#3
(11-19-2020, 11:29 AM)rocket2nfinity Wrote:
(11-19-2020, 07:12 AM)thorensjubilee Wrote: Hello,

I'm a NOOB. I have an Ubuntu computer and a Windows 10 computer. I have also had a stroke. I have just bought my Pinephone with Manjaro on it, but it has Postmarket OS on it instead. I want to flash my phone, but am not sure how to do it. I followed the following instructions:

Detailed usage instructions
  1. Download the Jumpdrive image
  2. Flash the Jumpdrive image to a micro SD card
  3. Boot the PinePhone from the Jumpdrive micro SD card
  4. Connect the PinePhone to your computer using USB-A -> USB-C cable
  5. Flash the exposed PinePhone drive (e.g. /dev/mm..., check for the right device in dmesg, GNOME disks, or similar, and make sure it's unmounted) with your chosen OS image
  6. Once the flashing process is complete, disconnect the PinePhone from your PC, power it down and remove the Jumpdrive SD card
  7. The process is now finished, and you can boot from eMMC
I got the Jumpdrive image on my pinephone saying that it's ready to go but then (point 5) I'm not sure. How do I flash my pinephone? Do I use etcher? Also, which computer is easier, the Ubuntu or the Windows?

Many thanks,

Chris
With Ubuntu, just double click on the manjaro image. It will open the built in disk copying program. Be sure to select the sd card and not your harddrive. It will ask you to confirm twice before doing it.

Thanks for replying. I have already used the Jumpdrive to flash UB Ports to my Pine phone.
Chris


Possibly Related Threads…
Thread Author Replies Views Last Post
  SIM card connection lost Jay Jay 4 155 09-03-2021, 04:52 PM
Last Post: Jay Jay
  After flashing UT on eMMC Convergence package not working anymore dfjdw8 0 323 06-11-2021, 12:28 AM
Last Post: dfjdw8
  Can't boot from eMMC or SD card... Nibel 1 478 06-03-2021, 08:41 PM
Last Post: ppafin
  using sd card rvh 7 1,428 04-07-2021, 02:49 PM
Last Post: tllim
  sd card to lollipop rvh 5 1,023 04-06-2021, 12:02 AM
Last Post: biketool
  Observations about SIM card recognition and OS distribution lsitongia 10 1,856 03-04-2021, 12:54 AM
Last Post: tllim
  Phone Won't Detect Music Files From SD Card Joelandsonja 11 5,735 02-25-2021, 11:23 PM
Last Post: cybercricket
  Cannot boot to SD card - Completely locked out of my phone the day I got it Giddyup 5 1,145 02-15-2021, 11:45 AM
Last Post: Giddyup
  Unable to read sd card bmeinka 9 1,551 02-10-2021, 11:25 AM
Last Post: Alfiory
  No sms texts on concumer cellular sim card tckosvic 2 566 02-09-2021, 02:05 PM
Last Post: tckosvic

Forum Jump:


Users browsing this thread: 1 Guest(s)