Non-booting SD
07-08-2020, 05:08 PM
(This post was last modified: 07-09-2020, 12:26 PM by lyssa.
Edit Reason: Report final resolution.
)
I am trying to copy the Manjaro KDE 20.06 image to an SD as step one in creating a 128G eMMC. Have been doing so for over a week.
I was able to create an XFCE SD and eMMC with no problem. Both worked fine. I've tried all the methods I have seen on the forums, but always end up with a non-booting KDE SD and a perpetual green led. Well, all methods but the installer script at https://gitlab.manjaro.org/manjaro-arm/a...-installer. That requires binfmt-qemu-static, which is not in the Arch repository.
So I'm at a standstill for the time being. My PBP is still working fine with the original KDE 64G eMMC or the XFCE 128G eMMC that I made. The XFCE UI is just not what I need.
I'm getting ready to see if a PBP will work as a frisbee. But, until I get to that point, has anyone any ideas that might prevent a flying PBP (not really, I quite like it)?
---
Big edit.
All is well. Boot problem resolved. It was a matter of paying attention.
Today I created a new KDE image for my SD using the Raspberry Pi Imager on my Mac, which works great with no dd, etc., although dd works fine, too. I then tried to boot it and got the perpetual green led again. OK, only thing left was to turn off eMMC. Did that, and poof! Booted as it should. That's an important step, because the machine remembers last boot.
I powered down, switched eMMC back on, and rebooted. Worked fine because the machine remembered it booted last from SD.
Next, I downloaded another image and check file, did all the check and prep, and wrote it with dd to the eMMC. Powered down, removed SD (getting smarter), and restarted. Perfect. Running KDE from my new 128G eMMC.
This was not wasted effort. I learned a lot from the process.
I was able to create an XFCE SD and eMMC with no problem. Both worked fine. I've tried all the methods I have seen on the forums, but always end up with a non-booting KDE SD and a perpetual green led. Well, all methods but the installer script at https://gitlab.manjaro.org/manjaro-arm/a...-installer. That requires binfmt-qemu-static, which is not in the Arch repository.
So I'm at a standstill for the time being. My PBP is still working fine with the original KDE 64G eMMC or the XFCE 128G eMMC that I made. The XFCE UI is just not what I need.
I'm getting ready to see if a PBP will work as a frisbee. But, until I get to that point, has anyone any ideas that might prevent a flying PBP (not really, I quite like it)?
---
Big edit.
All is well. Boot problem resolved. It was a matter of paying attention.
Today I created a new KDE image for my SD using the Raspberry Pi Imager on my Mac, which works great with no dd, etc., although dd works fine, too. I then tried to boot it and got the perpetual green led again. OK, only thing left was to turn off eMMC. Did that, and poof! Booted as it should. That's an important step, because the machine remembers last boot.
I powered down, switched eMMC back on, and rebooted. Worked fine because the machine remembered it booted last from SD.
Next, I downloaded another image and check file, did all the check and prep, and wrote it with dd to the eMMC. Powered down, removed SD (getting smarter), and restarted. Perfect. Running KDE from my new 128G eMMC.
This was not wasted effort. I learned a lot from the process.
