xhci-hcd xhci-hcd.6.auto: ERROR Transfer event for disabled endpoint
#1
I am using 4.4.132-1075-rockchip-ayufan kernel on Rockpro64 4GB board.

I boot from PCIe  SSD as roofs  and USB3 connecting a Seagate 2TB hard drive.

I recently notice this error:


Code:
xhci-hcd xhci-hcd.6.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring



How to solve the error?

Thanks in advance.
#2
I was so annoyed by the mistake that I switched to Armbian. Since the error does not appear anymore.
Sorry for any mistakes. English is not my native language

1. Quartz64 Model B, 4GB RAM

2. Quartz64 Model A, 4GB RAM

3. RockPro64 v2.1

https://linux-nerds.org/
#3
(12-22-2018, 01:17 AM)Bullet64 Wrote: I was so annoyed by the mistake that I switched to Armbian. Since the error does not appear anymore.

For Rock64,  I switched to Armbian,  it seems pretty good to me,  the 4 cores are all using the maximum frequency of RK3328: 1.5 Ghz

Pine64 stocked image for Rock64 is limited to 1.2Ghz

For Rockpro64,  I assume,  in Armbian, it will use 2.0 Ghz to 2 big cores,  1.5Ghz for 4 LITTLE cores. 

Could you confirm with me from your board?  Thank you in advance.

I have NanoPC T4 using the same RK3399 CPU as Rockpro64.   With Armbian,  I can achieve:  2.0 Ghz of 2 big cores,  1.5Ghz for 4 LITTLE cores, boot from NVMe as rootfs.

I don't know why  board manufactures are so conservative to use 1.8 Ghz for 2 big cores and 1.3Ghz for 4 LITTLE cores.
#4
I think this screenshot will answer your questions.  Wink

https://nextcloud.frank-mankel.org/s/JqeaCiTxDHagqeC
Sorry for any mistakes. English is not my native language

1. Quartz64 Model B, 4GB RAM

2. Quartz64 Model A, 4GB RAM

3. RockPro64 v2.1

https://linux-nerds.org/
#5
(12-23-2018, 01:15 PM)Bullet64 Wrote: I think this screenshot will answer your questions.  Wink

https://nextcloud.frank-mankel.org/s/JqeaCiTxDHagqeC

Looks really good to me.   I should start it with Armbian at beginning!

Now I need to reinstall all those software again:

Apache2, Tomcat, MySQL, Guacamole, Seafile, Nextcloud, PLEX etc... Huh


Possibly Related Threads…
Thread Author Replies Views Last Post
  USB3 xhci-hcd in SuperSpeed mode swan 0 466 05-11-2023, 05:35 AM
Last Post: swan
  Can RockPRO64 support PCIe Endpoint? andrewg132 3 2,093 10-14-2022, 06:24 AM
Last Post: rwk-
  Using the PCIe slot of ROCKPro64 as EndPoint mode nonoriri 1 1,765 11-20-2021, 10:53 AM
Last Post: fire219
Question My Rockpro64 stopped booting with these error messages please help seaurchin 4 4,587 02-18-2021, 04:27 PM
Last Post: TRS-80
  cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2 kuerious 10 27,884 01-18-2019, 04:13 PM
Last Post: nuumio

Forum Jump:


Users browsing this thread: 1 Guest(s)