12-10-2018, 06:05 AM
(This post was last modified: 01-07-2019, 06:02 AM by spatial_dreams.)
Hey fellow Rockers,
I'm having some trouble getting sound to play from the 3.5mm port on my rockpro 64
Kernel: Linux rockpro64 4.4.132-1075-rockchip-ayufan-ga83beded8524 #1 SMP Thu Jul 26 08:22:22 UTC 2018 aarch64 GNU/Linux
Distro: Debain Stretch 9.6
This is my first time encountering an audio problem so I'm not 100% I went through the all basics, but here's what I've done so far: - Verified my user is in the audio group
- installed pulseaudio and pavucontrol
- changed my default sinks to every option available with pacmd change-default-sink
- verified my volume was turned up in alsamixer
- played a known good file with aplay as local user and su
- tried a new headset, and tried the same headset in a different device. The headset is good.
- Searched this forum and followed Longsleep's recommendations posted here
- rebooted multiple times after iterating through these steps
None of these steps remedied the issue, and I still don't have any sound output from the 3.5mm. I was able to get audio through the HDMI port one time, but that happened unintentionally.
Sinks:
Code: 3 sink(s) available.
* index: 0
name: <alsa_output.platform-es8316-sound.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY FLAT_VOLUME
state: SUSPENDED
suspend cause: IDLE
priority: 9009
volume: front-left: 57659 / 88% / -3.34 dB, front-right: 57659 / 88% / -3.34 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
fixed latency: 99.95 ms
card: 0 <alsa_card.platform-es8316-sound>
module: 6
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = ""
alsa.id = "ff890000.i2s-ES8316 HiFi ES8316 HiFi-0"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "rockchip,es8316-codec"
alsa.long_card_name = "rockchip,es8316-codec"
device.bus_path = "platform-es8316-sound"
sysfs.path = "/devices/platform/es8316-sound/sound/card0"
device.string = "hw:0"
device.buffering.buffer_size = "17632"
device.buffering.fragment_size = "4408"
device.access_mode = "mmap"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "rockchip,es8316-codec Analog Stereo"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card"
index: 1
name: <alsa_output.platform-hdmi-dp-sound.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY FLAT_VOLUME
state: SUSPENDED
suspend cause: IDLE
priority: 9009
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 2
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
fixed latency: 99.95 ms
card: 1 <alsa_card.platform-hdmi-dp-sound>
module: 7
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = ""
alsa.id = "HDMI-DP multicodec-0"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "2"
alsa.card_name = "rk-hdmi-dp-sound"
alsa.long_card_name = "rk-hdmi-dp-sound"
device.bus_path = "platform-hdmi-dp-sound"
sysfs.path = "/devices/platform/hdmi-dp-sound/sound/card2"
device.string = "hw:2"
device.buffering.buffer_size = "17632"
device.buffering.fragment_size = "4408"
device.access_mode = "mmap"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "rk-hdmi-dp-sound Analog Stereo"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card"
ports:
analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
properties:
active port: <analog-output>
index: 2
name: <alsa_output.platform-spdif-sound.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY FLAT_VOLUME
state: SUSPENDED
suspend cause: IDLE
priority: 9009
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 3
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
fixed latency: 99.95 ms
card: 2 <alsa_card.platform-spdif-sound>
module: 8
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = ""
alsa.id = "ff870000.spdif-dit-hifi dit-hifi-0"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "ROCKCHIP,SPDIF"
alsa.long_card_name = "ROCKCHIP,SPDIF"
device.bus_path = "platform-spdif-sound"
sysfs.path = "/devices/platform/spdif-sound/sound/card1"
device.string = "hw:1"
device.buffering.buffer_size = "17632"
device.buffering.fragment_size = "4408"
device.access_mode = "mmap"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "ROCKCHIP,SPDIF Analog Stereo"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card"
ports:
analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
properties:
active port: <analog-output>
I'm not sure what to do next, so here I am. Thanks in advance for any assistance.
PS. lspci produces no output. Is this normal?
(12-10-2018, 06:05 AM)spatial_dreams Wrote: I'm having some trouble getting sound to play from the 3.5mm port on my rockpro 64
Kernel: Linux rockpro64 4.4.132-1075-rockchip-ayufan-ga83beded8524 #1 SMP Thu Jul 26 08:22:22 UTC 2018 aarch64 GNU/Linux
Distro: Debain Stretch 9.6 I have yet to get any sound out of my 3.5mm port under Linux. There are various "hints" that it is possible - I am sure it is but nobody has yet given instructions that made sense to me. e.g. see this thread. The one thing that I haven't tried, that IMHO may be worth a shot, is Armbian.
(12-10-2018, 06:05 AM)spatial_dreams Wrote: PS. lspci produces no output. Is this normal? Yup - the pci (linux) modules are compiled as option to load ("M" only if needed).
- PinePhone BraveHeart now v1.2b 3/32Gb daily driver, Tow-boot with pmOS/SXMO on eMMC
- PinePhone pmOS Community Edition 2/16Gb driving my picture frame, Tow-boot with pmOS/SXMO on eMMC
- PinePhone Pro Explorer Edition, Tow-boot on SPI, Arch/SXMO on eMMC
- ROCKPro64 v2.1 2GB, 16Gb eMMC retired in favour of a fruity upgrade
(12-10-2018, 06:05 AM)spatial_dreams Wrote: Hey fellow Rockers,
I'm having some trouble getting sound to play from the 3.5mm port on my rockpro 64
Kernel: Linux rockpro64 4.4.132-1075-rockchip-ayufan-ga83beded8524 #1 SMP Thu Jul 26 08:22:22 UTC 2018 aarch64 GNU/Linux
Distro: Debain Stretch 9.6
This is my first time encountering an audio problem so I'm not 100% I went through the all basics, but here's what I've done so far:- Verified my user is in the audio group
- installed pulseaudio and pavucontrol
- changed my default sinks to every option available with pacmd change-default-sink
- verified my volume was turned up in alsamixer
- played a known good file with aplay as local user and su
- tried a new headset, and tried the same headset in a different device. The headset is good.
- Searched this forum and followed Longsleep's recommendations posted here
- rebooted multiple times after iterating through these steps
None of these steps remedied the issue, and I still don't have any sound output. It's possible that it's sending the signal through the HDMI cable, but my monitor doesn't support audio so I can't tell.
Sinks:
Code: 3 sink(s) available.
* index: 0
name: <alsa_output.platform-es8316-sound.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY FLAT_VOLUME
state: SUSPENDED
suspend cause: IDLE
priority: 9009
volume: front-left: 57659 / 88% / -3.34 dB, front-right: 57659 / 88% / -3.34 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
fixed latency: 99.95 ms
card: 0 <alsa_card.platform-es8316-sound>
module: 6
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = ""
alsa.id = "ff890000.i2s-ES8316 HiFi ES8316 HiFi-0"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "rockchip,es8316-codec"
alsa.long_card_name = "rockchip,es8316-codec"
device.bus_path = "platform-es8316-sound"
sysfs.path = "/devices/platform/es8316-sound/sound/card0"
device.string = "hw:0"
device.buffering.buffer_size = "17632"
device.buffering.fragment_size = "4408"
device.access_mode = "mmap"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "rockchip,es8316-codec Analog Stereo"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card"
index: 1
name: <alsa_output.platform-hdmi-dp-sound.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY FLAT_VOLUME
state: SUSPENDED
suspend cause: IDLE
priority: 9009
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 2
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
fixed latency: 99.95 ms
card: 1 <alsa_card.platform-hdmi-dp-sound>
module: 7
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = ""
alsa.id = "HDMI-DP multicodec-0"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "2"
alsa.card_name = "rk-hdmi-dp-sound"
alsa.long_card_name = "rk-hdmi-dp-sound"
device.bus_path = "platform-hdmi-dp-sound"
sysfs.path = "/devices/platform/hdmi-dp-sound/sound/card2"
device.string = "hw:2"
device.buffering.buffer_size = "17632"
device.buffering.fragment_size = "4408"
device.access_mode = "mmap"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "rk-hdmi-dp-sound Analog Stereo"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card"
ports:
analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
properties:
active port: <analog-output>
index: 2
name: <alsa_output.platform-spdif-sound.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY FLAT_VOLUME
state: SUSPENDED
suspend cause: IDLE
priority: 9009
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 3
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
fixed latency: 99.95 ms
card: 2 <alsa_card.platform-spdif-sound>
module: 8
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = ""
alsa.id = "ff870000.spdif-dit-hifi dit-hifi-0"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "ROCKCHIP,SPDIF"
alsa.long_card_name = "ROCKCHIP,SPDIF"
device.bus_path = "platform-spdif-sound"
sysfs.path = "/devices/platform/spdif-sound/sound/card1"
device.string = "hw:1"
device.buffering.buffer_size = "17632"
device.buffering.fragment_size = "4408"
device.access_mode = "mmap"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "ROCKCHIP,SPDIF Analog Stereo"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card"
ports:
analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
properties:
active port: <analog-output>
I'm not sure what to do next, so here I am. Thanks in advance for any assistance.
PS. lspci produces no output. Is this normal?
12-14-2018, 06:26 AM
(This post was last modified: 01-07-2019, 05:42 AM by spatial_dreams.)
We, collectively, can't get sound working from the 3.5mm port in Linux?
|
