+- PINE64 (https://forum.pine64.org)
+-- Forum: ROCKPRO64 (https://forum.pine64.org/forumdisplay.php?fid=98)
+--- Forum: RockPro64 Hardware and Accessories (https://forum.pine64.org/forumdisplay.php?fid=102)
+--- Thread: No sound output from 3.5mm jack (/showthread.php?tid=6946)
No sound output from 3.5mm jack - spatial_dreams - 12-10-2018
Hey fellow Rockers,
I'm having some trouble getting sound to play from the 3.5mm port on my rockpro 64
Kernel: Linux rockpro64 4.4.132-1075-rockchip-ayufan-ga83beded8524 #1 SMP Thu Jul 26 08:22:22 UTC 2018 aarch64 GNU/Linux
Distro: Debain Stretch 9.6
This is my first time encountering an audio problem so I'm not 100% I went through the all basics, but here's what I've done so far:
- Verified my user is in the audio group
- installed pulseaudio and pavucontrol
- changed my default sinks to every option available with pacmd change-default-sink
- verified my volume was turned up in alsamixer
- played a known good file with aplay as local user and su
- tried a new headset, and tried the same headset in a different device. The headset is good.
- Searched this forum and followed Longsleep's recommendations posted here
- rebooted multiple times after iterating through these steps
Sinks:
Code:
3 sink(s) available.
* index: 0
name: <alsa_output.platform-es8316-sound.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY FLAT_VOLUME
state: SUSPENDED
suspend cause: IDLE
priority: 9009
volume: front-left: 57659 / 88% / -3.34 dB, front-right: 57659 / 88% / -3.34 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
fixed latency: 99.95 ms
card: 0 <alsa_card.platform-es8316-sound>
module: 6
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = ""
alsa.id = "ff890000.i2s-ES8316 HiFi ES8316 HiFi-0"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "rockchip,es8316-codec"
alsa.long_card_name = "rockchip,es8316-codec"
device.bus_path = "platform-es8316-sound"
sysfs.path = "/devices/platform/es8316-sound/sound/card0"
device.string = "hw:0"
device.buffering.buffer_size = "17632"
device.buffering.fragment_size = "4408"
device.access_mode = "mmap"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "rockchip,es8316-codec Analog Stereo"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card"
index: 1
name: <alsa_output.platform-hdmi-dp-sound.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY FLAT_VOLUME
state: SUSPENDED
suspend cause: IDLE
priority: 9009
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 2
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
fixed latency: 99.95 ms
card: 1 <alsa_card.platform-hdmi-dp-sound>
module: 7
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = ""
alsa.id = "HDMI-DP multicodec-0"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "2"
alsa.card_name = "rk-hdmi-dp-sound"
alsa.long_card_name = "rk-hdmi-dp-sound"
device.bus_path = "platform-hdmi-dp-sound"
sysfs.path = "/devices/platform/hdmi-dp-sound/sound/card2"
device.string = "hw:2"
device.buffering.buffer_size = "17632"
device.buffering.fragment_size = "4408"
device.access_mode = "mmap"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "rk-hdmi-dp-sound Analog Stereo"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card"
ports:
analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
properties:
active port: <analog-output>
index: 2
name: <alsa_output.platform-spdif-sound.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY FLAT_VOLUME
state: SUSPENDED
suspend cause: IDLE
priority: 9009
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 3
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
fixed latency: 99.95 ms
card: 2 <alsa_card.platform-spdif-sound>
module: 8
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = ""
alsa.id = "ff870000.spdif-dit-hifi dit-hifi-0"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "ROCKCHIP,SPDIF"
alsa.long_card_name = "ROCKCHIP,SPDIF"
device.bus_path = "platform-spdif-sound"
sysfs.path = "/devices/platform/spdif-sound/sound/card1"
device.string = "hw:1"
device.buffering.buffer_size = "17632"
device.buffering.fragment_size = "4408"
device.access_mode = "mmap"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "ROCKCHIP,SPDIF Analog Stereo"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card"
ports:
analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
properties:
active port: <analog-output>I'm not sure what to do next, so here I am. Thanks in advance for any assistance.
PS. lspci produces no output. Is this normal?
RE: No sound output from 3.5mm jack - dukla2000 - 12-10-2018
(12-10-2018, 06:05 AM)spatial_dreams Wrote: I'm having some trouble getting sound to play from the 3.5mm port on my rockpro 64I have yet to get any sound out of my 3.5mm port under Linux. There are various "hints" that it is possible - I am sure it is but nobody has yet given instructions that made sense to me. e.g. see this thread. The one thing that I haven't tried, that IMHO may be worth a shot, is Armbian.
Kernel: Linux rockpro64 4.4.132-1075-rockchip-ayufan-ga83beded8524 #1 SMP Thu Jul 26 08:22:22 UTC 2018 aarch64 GNU/Linux
Distro: Debain Stretch 9.6
(12-10-2018, 06:05 AM)spatial_dreams Wrote: PS. lspci produces no output. Is this normal?Yup - the pci (linux) modules are compiled as option to load ("M" only if needed).
RE: No sound output from 3.5mm jack - BobC - 12-10-2018
(12-10-2018, 06:05 AM)spatial_dreams Wrote: Hey fellow Rockers,
I'm having some trouble getting sound to play from the 3.5mm port on my rockpro 64
Kernel: Linux rockpro64 4.4.132-1075-rockchip-ayufan-ga83beded8524 #1 SMP Thu Jul 26 08:22:22 UTC 2018 aarch64 GNU/Linux
Distro: Debain Stretch 9.6
This is my first time encountering an audio problem so I'm not 100% I went through the all basics, but here's what I've done so far:None of these steps remedied the issue, and I still don't have any sound output. It's possible that it's sending the signal through the HDMI cable, but my monitor doesn't support audio so I can't tell.
- Verified my user is in the audio group
- installed pulseaudio and pavucontrol
- changed my default sinks to every option available with pacmd change-default-sink
- verified my volume was turned up in alsamixer
- played a known good file with aplay as local user and su
- tried a new headset, and tried the same headset in a different device. The headset is good.
- Searched this forum and followed Longsleep's recommendations posted here
- rebooted multiple times after iterating through these steps
Sinks:
Code:3 sink(s) available. * index: 0 name: <alsa_output.platform-es8316-sound.analog-stereo> driver: <module-alsa-card.c> flags: HARDWARE DECIBEL_VOLUME LATENCY FLAT_VOLUME state: SUSPENDED suspend cause: IDLE priority: 9009 volume: front-left: 57659 / 88% / -3.34 dB, front-right: 57659 / 88% / -3.34 dB balance 0.00 base volume: 65536 / 100% / 0.00 dB volume steps: 65537 muted: no current latency: 0.00 ms max request: 0 KiB max rewind: 0 KiB monitor source: 0 sample spec: s16le 2ch 44100Hz channel map: front-left,front-right Stereo used by: 0 linked by: 0 fixed latency: 99.95 ms card: 0 <alsa_card.platform-es8316-sound> module: 6 properties: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "" alsa.id = "ff890000.i2s-ES8316 HiFi ES8316 HiFi-0" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "0" alsa.card_name = "rockchip,es8316-codec" alsa.long_card_name = "rockchip,es8316-codec" device.bus_path = "platform-es8316-sound" sysfs.path = "/devices/platform/es8316-sound/sound/card0" device.string = "hw:0" device.buffering.buffer_size = "17632" device.buffering.fragment_size = "4408" device.access_mode = "mmap" device.profile.name = "analog-stereo" device.profile.description = "Analog Stereo" device.description = "rockchip,es8316-codec Analog Stereo" module-udev-detect.discovered = "1" device.icon_name = "audio-card" index: 1 name: <alsa_output.platform-hdmi-dp-sound.analog-stereo> driver: <module-alsa-card.c> flags: HARDWARE DECIBEL_VOLUME LATENCY FLAT_VOLUME state: SUSPENDED suspend cause: IDLE priority: 9009 volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB balance 0.00 base volume: 65536 / 100% / 0.00 dB volume steps: 65537 muted: no current latency: 0.00 ms max request: 0 KiB max rewind: 0 KiB monitor source: 2 sample spec: s16le 2ch 44100Hz channel map: front-left,front-right Stereo used by: 0 linked by: 0 fixed latency: 99.95 ms card: 1 <alsa_card.platform-hdmi-dp-sound> module: 7 properties: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "" alsa.id = "HDMI-DP multicodec-0" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "2" alsa.card_name = "rk-hdmi-dp-sound" alsa.long_card_name = "rk-hdmi-dp-sound" device.bus_path = "platform-hdmi-dp-sound" sysfs.path = "/devices/platform/hdmi-dp-sound/sound/card2" device.string = "hw:2" device.buffering.buffer_size = "17632" device.buffering.fragment_size = "4408" device.access_mode = "mmap" device.profile.name = "analog-stereo" device.profile.description = "Analog Stereo" device.description = "rk-hdmi-dp-sound Analog Stereo" module-udev-detect.discovered = "1" device.icon_name = "audio-card" ports: analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown) properties: active port: <analog-output> index: 2 name: <alsa_output.platform-spdif-sound.analog-stereo> driver: <module-alsa-card.c> flags: HARDWARE DECIBEL_VOLUME LATENCY FLAT_VOLUME state: SUSPENDED suspend cause: IDLE priority: 9009 volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB balance 0.00 base volume: 65536 / 100% / 0.00 dB volume steps: 65537 muted: no current latency: 0.00 ms max request: 0 KiB max rewind: 0 KiB monitor source: 3 sample spec: s16le 2ch 44100Hz channel map: front-left,front-right Stereo used by: 0 linked by: 0 fixed latency: 99.95 ms card: 2 <alsa_card.platform-spdif-sound> module: 8 properties: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "" alsa.id = "ff870000.spdif-dit-hifi dit-hifi-0" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "1" alsa.card_name = "ROCKCHIP,SPDIF" alsa.long_card_name = "ROCKCHIP,SPDIF" device.bus_path = "platform-spdif-sound" sysfs.path = "/devices/platform/spdif-sound/sound/card1" device.string = "hw:1" device.buffering.buffer_size = "17632" device.buffering.fragment_size = "4408" device.access_mode = "mmap" device.profile.name = "analog-stereo" device.profile.description = "Analog Stereo" device.description = "ROCKCHIP,SPDIF Analog Stereo" module-udev-detect.discovered = "1" device.icon_name = "audio-card" ports: analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown) properties: active port: <analog-output>
I'm not sure what to do next, so here I am. Thanks in advance for any assistance.
PS. lspci produces no output. Is this normal?
RE: No sound output from 3.5mm jack - spatial_dreams - 12-14-2018
We, collectively, can't get sound working from the 3.5mm port in Linux?