PINE64   ›   ROCK64   ›   General Discussion on ROCK64   ›   Rock64 Power Supply Polarity

Thread Closed 
Rock64 Power Supply Polarity
Lamensis
Pine Initiate
**
Joined: Dec 2017
Posts: 8

Reputation: 0
#11
12-18-2017, 11:57 AM
(12-18-2017, 10:57 AM)nmhart322 Wrote: The barrel jack on the board has 3 pins connecting it to the board. Is the third pin for structural integrity then?

Yes, it is, as i mentioned earlier.
NablaMetal
Pine Initiate
**
Joined: May 2018
Posts: 5

Reputation: 0
#12
05-26-2018, 07:15 AM
Hi there, got my ROCK64 today, whithout power supply beacause I found one that may be suitable in my stuff...
I seem to have powerup issue with it (no led after pluging supply and pushing power button). My power supply is 5V (center positive) with max output 3.5A. Do you think th output is too high ?

thanks,
evilbunny
Moderator
*****
Moderators
Joined: Nov 2017
Posts: 592

Reputation: 38
#13
05-26-2018, 03:40 PM
(05-26-2018, 07:15 AM)NablaMetal Wrote: Hi there, got my ROCK64 today, whithout power supply beacause I found one that may be suitable in my stuff...
I seem to have powerup issue with it (no led after pluging supply and pushing power button). My power supply is 5V (center positive) with max output 3.5A. Do you think th output is too high ?

thanks,


There is a green led that is connected to the power socket that will illuminate when plugged into power.
pfeerick
Moderator
*****
Moderators
Joined: May 2016
Posts: 1,361

Reputation: 118
#14
05-26-2018, 04:56 PM
(05-26-2018, 07:15 AM)NablaMetal Wrote: Hi there, got my ROCK64 today, whithout power supply beacause I found one that may be suitable in my stuff...
I seem to have powerup issue with it (no led after pluging supply and pushing power button). My power supply is 5V (center positive) with max output 3.5A. Do you think th output is too high ?

thanks,

The A(mperage) could be 100A and it wouldn't matter, it's the voltage (i.e. pressure) that can cause damage. As long as the voltage is 5v (+/- 5%) and correctly polarized (i.e. centre postiive as you indicated) it should be fine. If you plug in the power, and the green LED between the DC jack and IR sensor doesn't come on, you either have a faulty board, connector or power supply.
pine64 wiki, linux-sunxi Pine64 wiki, the board/connector layout & pinout of the Raspberry Pi/Euler/EXP connectors
NablaMetal
Pine Initiate
**
Joined: May 2018
Posts: 5

Reputation: 0
#15
05-27-2018, 05:23 AM
Yes that was what I was thinking but was'nt much sure. The power supply does power correctly the usb hub it was made for, but still I will buy another power supply to be sure...

Thanks,
NablaMetal
Pine Initiate
**
Joined: May 2018
Posts: 5

Reputation: 0
#16
05-29-2018, 01:13 AM
Ok my power supply was just faulty. Everything works with my new supply.

Thanks for helping Smile
Thread Closed 


Possibly Related Threads…
Thread Author Replies Views Last Post
  Rock64 No Audio @ Debian 12 dmitrymyadzelets 2 1,115 04-08-2024, 06:47 AM
Last Post: dmitrymyadzelets
  OpenWRT on the Rock64 CanadianBacon 14 10,791 04-03-2024, 08:48 AM
Last Post: helpmerock
  Rock64 bricked shawwwn 7 7,028 03-17-2024, 12:22 PM
Last Post: dmitrymyadzelets
  Rock64 won't boot luminosity7 10 6,023 03-16-2024, 08:33 AM
Last Post: dmitrymyadzelets
  Rock64 doesn't boot dstallmo 1 742 03-16-2024, 08:29 AM
Last Post: dmitrymyadzelets
  How well does Rock64 deal with HDR and Atmos on Kodi? drvlikhell 3 2,710 04-29-2023, 04:24 AM
Last Post: newestssd
  Rock64 board not working, no HDMI no Ethernet. EDited 3 4,286 01-17-2023, 02:31 PM
Last Post: Flagtrax
  ROCK64 v3 can it boot from USB? Tsagualsa 4 2,971 11-29-2022, 11:31 AM
Last Post: Macgyver
  rock64 v3 spiflash Macgyver 0 1,059 11-28-2022, 02:18 PM
Last Post: Macgyver
  my rock64 dosen't work rookie_267 0 1,252 10-07-2022, 07:50 PM
Last Post: rookie_267

Forum Jump:


Users browsing this thread: 7 Guest(s)