PINE64   ›   PINE A64(+)   ›   Pine A64 Hardware, Accessories and POT   ›   LCD and Touch Panel   ›   Cable for LCD

Cable for LCD
sbentjies
Pine Initiate
**
Joined: Feb 2016
Posts: 5

Reputation: 0
#1
02-17-2016, 01:20 PM
I have ordered the 7" LCD with my board which lists a 4 Lane MIPI DSI Ribbon Port. What cable do I need to connect it to my board?


Thanks,
  Reply
Ghost
Messenger
*****
Moderators
Joined: Jan 2016
Posts: 742

Reputation: 72
#2
02-17-2016, 01:55 PM
(02-17-2016, 01:20 PM)sbentjies Wrote: I have ordered the 7" LCD with my board which lists a 4 Lane MIPI DSI Ribbon Port. What cable do I need to connect it to my board?


Thanks,

It should come complete with the relevant cable Smile
  Reply
sbentjies
Pine Initiate
**
Joined: Feb 2016
Posts: 5

Reputation: 0
#3
02-17-2016, 01:59 PM
(02-17-2016, 01:55 PM)SkairkrohBule Wrote:
(02-17-2016, 01:20 PM)sbentjies Wrote: I have ordered the 7" LCD with my board which lists a 4 Lane MIPI DSI Ribbon Port. What cable do I need to connect it to my board?


Thanks,

It should come complete with the relevant cable Smile

Yeah that would be shitty for it not to...
  Reply
tllim
Founder
*****
Moderators
Joined: Dec 2015
Posts: 4,335

Reputation: 294
#4
02-17-2016, 10:07 PM
(02-17-2016, 01:20 PM)sbentjies Wrote: I have ordered the 7" LCD with my board which lists a 4 Lane MIPI DSI Ribbon Port. What cable do I need to connect it to my board?


Thanks,

The LCD panel comes with its own flat flex type cable.
  Website
  Reply
sbentjies
Pine Initiate
**
Joined: Feb 2016
Posts: 5

Reputation: 0
#5
02-17-2016, 10:14 PM
(02-17-2016, 10:07 PM)tllim Wrote:
(02-17-2016, 01:20 PM)sbentjies Wrote: I have ordered the 7" LCD with my board which lists a 4 Lane MIPI DSI Ribbon Port. What cable do I need to connect it to my board?


Thanks,

The LCD panel comes with its own flat flex type cable.

Which attaches to a port on the board I assume
  Reply
tllim
Founder
*****
Moderators
Joined: Dec 2015
Posts: 4,335

Reputation: 294
#6
02-17-2016, 10:26 PM
(02-17-2016, 10:14 PM)sbentjies Wrote:
(02-17-2016, 10:07 PM)tllim Wrote:
(02-17-2016, 01:20 PM)sbentjies Wrote: I have ordered the 7" LCD with my board which lists a 4 Lane MIPI DSI Ribbon Port. What cable do I need to connect it to my board?


Thanks,

The LCD panel comes with its own flat flex type cable.

Which attaches to a port on the board I assume
Yes. attached to both LCD and TP ports.
  Website
  Reply
sbentjies
Pine Initiate
**
Joined: Feb 2016
Posts: 5

Reputation: 0
#7
02-18-2016, 06:30 AM
(02-17-2016, 10:26 PM)tllim Wrote:
(02-17-2016, 10:14 PM)sbentjies Wrote:
(02-17-2016, 10:07 PM)tllim Wrote:
(02-17-2016, 01:20 PM)sbentjies Wrote: I have ordered the 7" LCD with my board which lists a 4 Lane MIPI DSI Ribbon Port. What cable do I need to connect it to my board?


Thanks,

The LCD panel comes with its own flat flex type cable.

Which attaches to a port on the board I assume
Yes. attached to both LCD and TP ports.

TP?
  Reply
Ghost
Messenger
*****
Moderators
Joined: Jan 2016
Posts: 742

Reputation: 72
#8
02-18-2016, 06:50 AM (This post was last modified: 02-18-2016, 06:51 AM by Ghost.)
(02-18-2016, 06:30 AM)sbentjies Wrote:
(02-17-2016, 10:26 PM)tllim Wrote:
(02-17-2016, 10:14 PM)sbentjies Wrote:
(02-17-2016, 10:07 PM)tllim Wrote:
(02-17-2016, 01:20 PM)sbentjies Wrote: I have ordered the 7" LCD with my board which lists a 4 Lane MIPI DSI Ribbon Port. What cable do I need to connect it to my board?


Thanks,

The LCD panel comes with its own flat flex type cable.

Which attaches to a port on the board I assume
Yes. attached to both LCD and TP ports.

TP?

Touch panel.
  Reply
matthewclso
Pine Initiate
**
Joined: Feb 2016
Posts: 2

Reputation: 0
#9
02-28-2016, 12:59 PM
Hello, I noticed that Pine A64 uses MIPI DSI and touch port.  I know the MIPI DSI is 4 pin but what kind is the touch controller port?  Will this work?  It says it has S3402 touch ic controller.  I have also seen some with S3508 touch ic.
  Reply
patrickhwood
Pine Adept
***
Joined: Jan 2016
Posts: 88

Reputation: 11
#10
02-28-2016, 01:47 PM
(02-28-2016, 12:59 PM)matthewclso Wrote: Hello, I noticed that Pine A64 uses MIPI DSI and touch port.  I know the MIPI DSI is 4 pin but what kind is the touch controller port?  Will this work?  It says it has S3402 touch ic controller.  I have also seen some with S3508 touch ic.

You can't assume that touch panel controllers are interchangeable.  If you can't find out more about that touch IC and find an existing linux driver for it, you won't get it to work out of the box without writing or adapting a different driver to it.
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Ribbon Cable Extenders ? Severian 14 21,460 08-04-2016, 02:11 PM
Last Post: jodybrown99

Forum Jump:


Users browsing this thread: 10 Guest(s)