LCD screen problem;
#1
Hi

i have 2 x pine64 board.

i assembly package (board, case and LCD) and trying install openhab. i build board and lcd with forum and video but lcd not working (hdmi is working).

i added photos for assembly.

how can i be sure that the LCD works?

regards.

[Image: rEyA83.jpg]


[Image: PQGy6O.jpg]

[Image: QQy6Yy.jpg]

[Image: MkROg1.jpg]
  Reply
#2
The LCD Touchscreen requires a different software image to the HDMI version. See here on the Pine wiki.

(Note that only Android currently works with the LCD screen. There is no LCD compatible image of openHAB, Ubuntu, Debian, RemixOS, etc).
  Reply
#3
i read this post [on armbian forum] this morning concerning the use of the lcd panel on other builds.
http://forum.armbian.com/index.php/topic...entry15838
it was linked from this post,
http://forum.pine64.org/showthread.php?tid=2265, which is an informative, insightful must read/join and possibly contribute if useful info is gained , imo. but in any event that armbian forum post shines a light of hope on the lcd panel situation. certainly worth trying on other builds.
  Reply
#4
(09-24-2016, 12:46 PM)dkryder Wrote: i read this post [on armbian forum] this morning concerning the use of the lcd panel on other builds.
http://forum.armbian.com/index.php/topic...entry15838
it was linked from this post,  
http://forum.pine64.org/showthread.php?tid=2265, which is an informative, insightful must read/join and possibly contribute if useful info is gained , imo. but in any event that armbian forum post shines a light of hope on the lcd panel situation. certainly worth trying on other builds.

Make sure you downloaded and burned the "LCD" version of software, not HDMI. Also, on the first boot, remove the wireless module card. After the Pine64 boots completed, turn off, and reinstalled wireless module.
  Reply
#5
(09-27-2016, 10:48 AM)Ddorrer Wrote:
(09-24-2016, 12:46 PM)dkryder Wrote: i read this post [on armbian forum] this morning concerning the use of the lcd panel on other builds.
http://forum.armbian.com/index.php/topic...entry15838
it was linked from this post,  
http://forum.pine64.org/showthread.php?tid=2265, which is an informative, insightful must read/join and possibly contribute if useful info is gained , imo. but in any event that armbian forum post shines a light of hope on the lcd panel situation. certainly worth trying on other builds.

Make sure you downloaded and burned the "LCD" version of software, not HDMI. Also, on the first boot, remove the wireless module card. After the Pine64 boots completed, turn off, and reinstalled wireless module.
thank you for the module tip, i missed that before. but , yeah, i have been using the lcd version.
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  using Cellphone/mobile phone display screen desai_amogh 9 11,096 12-24-2018, 04:16 AM
Last Post: benhadad
  LCD Screen for running Octoprint sb_88 2 2,330 03-14-2017, 08:40 AM
Last Post: sb_88
  touch screen not working mike280z 1 1,726 12-22-2016, 12:46 PM
Last Post: Bluphire
  Z-Wave module problem vintagewaffle 0 1,136 10-26-2016, 10:50 AM
Last Post: vintagewaffle
  output on LCD screen Rigor_M 1 1,667 07-18-2016, 12:41 PM
Last Post: Rigor_M
  dead LCD screen? jdmwrx94 0 1,148 07-16-2016, 01:43 PM
Last Post: jdmwrx94
  Touch Screen monitor/module riahim 4 3,054 07-06-2016, 08:07 AM
Last Post: riahim
  How to install Touch Screen? firelegend 1 2,039 06-15-2016, 08:51 PM
Last Post: janjwerner
  512 and 7" touch screen? ShreddinPB 4 2,513 06-15-2016, 08:55 AM
Last Post: ShreddinPB
  Is it possible to have more than one screen? MostHated 2 1,995 03-02-2016, 03:42 PM
Last Post: MostHated

Forum Jump:


Users browsing this thread: 1 Guest(s)