LCD screen problem; - Printable Version

LCD screen problem; - Printable Version

+- PINE64 (https://forum.pine64.org)
+-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4)
+--- Forum: Pine A64 Hardware, Accessories and POT (https://forum.pine64.org/forumdisplay.php?fid=32)
+---- Forum: POT modules (https://forum.pine64.org/forumdisplay.php?fid=8)
+---- Thread: LCD screen problem; (/showthread.php?tid=2271)

LCD screen problem; - borahan - 09-24-2016

Hi

i have 2 x pine64 board.

i assembly package (board, case and LCD) and trying install openhab. i build board and lcd with forum and video but lcd not working (hdmi is working).

i added photos for assembly.

how can i be sure that the LCD works?

regards.

RE: LCD screen problem; - Ghost - 09-24-2016

The LCD Touchscreen requires a different software image to the HDMI version. See here on the Pine wiki.

(Note that only Android currently works with the LCD screen. There is no LCD compatible image of openHAB, Ubuntu, Debian, RemixOS, etc).

RE: LCD screen problem; - dkryder - 09-24-2016

i read this post [on armbian forum] this morning concerning the use of the lcd panel on other builds.
http://forum.armbian.com/index.php/topic/1917-armbian-running-on-pine64-and-other-a64h5-devices/page-3#entry15838
it was linked from this post,
http://forum.pine64.org/showthread.php?tid=2265, which is an informative, insightful must read/join and possibly contribute if useful info is gained , imo. but in any event that armbian forum post shines a light of hope on the lcd panel situation. certainly worth trying on other builds.

RE: LCD screen problem; - Ddorrer - 09-27-2016

(09-24-2016, 12:46 PM)dkryder Wrote: i read this post [on armbian forum] this morning concerning the use of the lcd panel on other builds.
http://forum.armbian.com/index.php/topic/1917-armbian-running-on-pine64-and-other-a64h5-devices/page-3#entry15838
it was linked from this post,
http://forum.pine64.org/showthread.php?tid=2265, which is an informative, insightful must read/join and possibly contribute if useful info is gained , imo. but in any event that armbian forum post shines a light of hope on the lcd panel situation. certainly worth trying on other builds.

Make sure you downloaded and burned the "LCD" version of software, not HDMI. Also, on the first boot, remove the wireless module card. After the Pine64 boots completed, turn off, and reinstalled wireless module.

RE: LCD screen problem; - dkryder - 09-27-2016

(09-27-2016, 10:48 AM)Ddorrer Wrote:
(09-24-2016, 12:46 PM)dkryder Wrote: i read this post [on armbian forum] this morning concerning the use of the lcd panel on other builds.
http://forum.armbian.com/index.php/topic/1917-armbian-running-on-pine64-and-other-a64h5-devices/page-3#entry15838
it was linked from this post,
http://forum.pine64.org/showthread.php?tid=2265, which is an informative, insightful must read/join and possibly contribute if useful info is gained , imo. but in any event that armbian forum post shines a light of hope on the lcd panel situation. certainly worth trying on other builds.

Make sure you downloaded and burned the "LCD" version of software, not HDMI. Also, on the first boot, remove the wireless module card. After the Pine64 boots completed, turn off, and reinstalled wireless module.

thank you for the module tip, i missed that before. but , yeah, i have been using the lcd version.