It seems to have found the previous attempts, this is where it seems to go wrong,
at the release signature
--------
>>>> Mounting target filesystem
+ '[' -z '' ']'
+ mkdir -p /home/d/pinebook-pro-debian-installer/sysimage
+ sudo mount /dev/sda6 /home/d/pinebook-pro-debian-installer/sysimage
+ sudo mkdir -p /home/d/pinebook-pro-debian-installer/sysimage/boot
+ sudo mount /dev/sda5 /home/d/pinebook-pro-debian-installer/sysimage/boot
+ sudo mkdir -p /home/d/pinebook-pro-debian-installer/sysimage/boot/efi
+ sudo mount /dev/sda4 /home/d/pinebook-pro-debian-installer/sysimage/boot/efi
+ do_debootstrap
+ printf '\n\n>>>> Installing base system\n\n'
>>>> Installing base system
+ '[' '!' -e debootstrap-arm64.tar.gz ']'
+ do_real_debootstrap
+ sudo debootstrap --arch=arm64 --include ca-certificates,console-setup,cryptsetup-initramfs,initramfs-tools,locales,keyboard-configuration,network-manager,sudo,u-boot-menu,gnupg,plymouth,plymouth-themes bullseye /home/d/pinebook-pro-debian-installer/sysimage
I: Retrieving InRelease
I: Checking Release signature
E: Release signed by unknown key (key id 605C66F00D6C9793)
+ do_umount
+ printf '\n\n>>>> umount\n\n'
>>>> umount
+ for i in boot/efi boot dev proc sys
+ sudo umount /home/d/pinebook-pro-debian-installer/sysimage/boot/efi
+ true
+ for i in boot/efi boot dev proc sys
+ sudo umount /home/d/pinebook-pro-debian-installer/sysimage/boot
+ true
+ for i in boot/efi boot dev proc sys
+ sudo umount /home/d/pinebook-pro-debian-installer/sysimage/dev
umount: /home/d/pinebook-pro-debian-installer/sysimage/dev: mountpoint not found
+ for i in boot/efi boot dev proc sys
+ sudo umount /home/d/pinebook-pro-debian-installer/sysimage/proc
umount: /home/d/pinebook-pro-debian-installer/sysimage/proc: mountpoint not found
+ for i in boot/efi boot dev proc sys
+ sudo umount /home/d/pinebook-pro-debian-installer/sysimage/sys
umount: /home/d/pinebook-pro-debian-installer/sysimage/sys: mountpoint not found
+ sudo umount /home/d/pinebook-pro-debian-installer/sysimage
+ true
+ '[' '!' -z '' ']'
03-13-2025, 08:11 PM
(This post was last modified: 03-13-2025, 08:38 PM by Der Geist der Maschine.
Edit Reason: git log
)
What you use is not my modified installer but Daniel Thompson's original installer. His does not work anymore.
Do a "git log" and compare the commit messages with the commit messages from my repository https://github.com/schaecsn/pinebook-pro...ts/master/. I expect them to be different.
You are right, I didn't realize that the Danial Thompson installer was on
the sd card, and I tried again ... and failed
Probably because of sd boot, your git is on emmc (which is where I started at)
---- in section >>>>> installing base system
E: no such script: /usr/share/debbootstrap/scripts/bookworm
so I copied this and debian-common to sd .....but then
release signed by unkown key ..... f8d2585b8783g481
which probably comes back to Daniel Thompson
I'm guessing I should install git on sd card after renaming original?
Oh, I did not know that debootstrap has config files for every Debian version. The debootstrap from Mrfix's Debian 9 is apparently not aware of Debian Bookworm. Copying over the config files is a hack and I do not know in what follow up issue you may run. If I recall, you have Manjaro on emmc. That should be more recent than Mrfix's Debian 9. I recommend you using that as a starting point.
You don't need to backup Daniel Thomspon's installer. You can clone mine into another directory.
Here is my installation from a Manjaro micro SD (last updated March 2024) on an usb thumb drive (I needed to change the swapfile size from 2GB to 1 MB in the installer as my whole usb thumb drive is 2 GB in total).
Code: manjaro:~$ git clone https://github.com/schaecsn/pinebook-pro-debian-installer pinebook-pro-debian-installer-new
Cloning into 'pinebook-pro-debian-installer-new'...
remote: Enumerating objects: 267, done.
remote: Counting objects: 100% (35/35), done.
remote: Compressing objects: 100% (24/24), done.
remote: Total 267 (delta 15), reused 25 (delta 9), pack-reused 232 (from 1)
Receiving objects: 100% (267/267), 66.96 KiB | 357.00 KiB/s, done.
Resolving deltas: 100% (132/132), done.
manjaro:~$ cd pinebook-pro-debian-installer-new/
manjaro:~/pinebook-pro-debian-installer-new$ ./install-debian BLKDEV=/dev/sda
>>>> Preparing to install
Submodule 'ap6256-firmware' (https://gitlab.manjaro.org/manjaro-arm/packages/community/ap6256-firmware) registered for path 'ap6256-firmware'
Submodule 'bootloader' (https://github.com/mrfixit2001/updates_repo) registered for path 'bootloader'
Submodule 'firmware' (https://gitlab.manjaro.org/tsys/pinebook-firmware.git) registered for path 'pinebook-firmware'
Cloning into '/home/schaecsn/pinebook-pro-debian-installer-new/ap6256-firmware'...
warning: redirecting to https://gitlab.manjaro.org/manjaro-arm/packages/community/ap6256-firmware.git/
Cloning into '/home/schaecsn/pinebook-pro-debian-installer-new/bootloader'...
Cloning into '/home/schaecsn/pinebook-pro-debian-installer-new/pinebook-firmware'...
Submodule path 'ap6256-firmware': checked out 'a30bf312b268eab42d38fab0cc3ed3177895ff5d'
Submodule path 'bootloader': checked out 'c95331aecdb961afbca6e6ed73393d6abe7fdc7d'
Submodule path 'pinebook-firmware': checked out '937f0d52d27d7712da6a008d35fd7c2819e2b077'
[sudo] password for schaecsn:
warning: dosfstools-4.2-3 is up to date -- skipping
resolving dependencies...
looking for conflicting packages...
Packages (2) debootstrap-1.0.134-1 pigz-2.8-1
Total Download Size: 0.11 MiB
Total Installed Size: 0.36 MiB
:: Proceed with installation? [Y/n]
:: Retrieving packages...
pigz-2.8-1-aarch64 80.9 KiB 83.4 KiB/s 00:01 [################################] 100%
debootstrap-1.0.134-1-any 36.5 KiB 30.9 KiB/s 00:01 [################################] 100%
Total (2/2) 117.4 KiB 83.8 KiB/s 00:01 [################################] 100%
(2/2) checking keys in keyring [################################] 100%
(2/2) checking package integrity [################################] 100%
(2/2) loading package files [################################] 100%
(2/2) checking for file conflicts [################################] 100%
(2/2) checking available disk space [################################] 100%
:: Processing package changes...
(1/2) installing debootstrap [################################] 100%
Optional dependencies for debootstrap
gnupg: check release signatures [installed]
debian-archive-keyring: check release signatures for Debian
debian-ports-archive-keyring: check release signatures for Debian Ports
ubuntu-keyring: check release signatures for Ubuntu
(2/2) installing pigz [################################] 100%
:: Running post-transaction hooks...
(1/1) Arming ConditionNeedsUpdate...
>>>> Partitioning
Checking that no-one is using this disk right now ... OK
Disk /dev/sda: 1.86 GiB, 1992294400 bytes, 3891200 sectors
Disk model: USB Disk
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x6d5bf375
Old situation:
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 0 1292287 1292288 631M 0 Empty
/dev/sda2 4524 23563 19040 9.3M ef EFI (FAT-12/16/32)
/dev/sda3 1292288 3891199 2598912 1.2G 83 Linux
>>> Script header accepted.
>>> Script header accepted.
>>> Script header accepted.
>>> Created a new GPT disklabel (GUID: 989448C7-C35A-461A-A0E3-BA1B696820C6).
/dev/sda1: Created a new partition 1 of type 'Linux reserved' and of size 8 MiB.
/dev/sda2: Created a new partition 2 of type 'Linux reserved' and of size 4 MiB.
/dev/sda3: Created a new partition 3 of type 'Linux reserved' and of size 4 MiB.
/dev/sda4: Created a new partition 4 of type 'EFI System' and of size 200 MiB.
/dev/sda5: Created a new partition 5 of type 'Linux filesystem' and of size 500 MiB.
/dev/sda6: Created a new partition 6 of type 'Linux filesystem' and of size 1.2 GiB.
/dev/sda7: Done.
New situation:
Disklabel type: gpt
Disk identifier: 989448C7-C35A-461A-A0E3-BA1B696820C6
Device Start End Sectors Size Type
/dev/sda1 64 16383 16320 8M Linux reserved
/dev/sda2 16384 24575 8192 4M Linux reserved
/dev/sda3 24576 32767 8192 4M Linux reserved
/dev/sda4 32768 442367 409600 200M EFI System
/dev/sda5 442368 1466367 1024000 500M Linux filesystem
/dev/sda6 1466368 3889151 2422784 1.2G Linux filesystem
The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.
>>>> Installing Pinebook Pro boot firmware
39+1 records in
39+1 records out
163836 bytes (164 kB, 160 KiB) copied, 0.0543011 s, 3.0 MB/s
1024+0 records in
1024+0 records out
4194304 bytes (4.2 MB, 4.0 MiB) copied, 0.9898 s, 4.2 MB/s
1024+0 records in
1024+0 records out
4194304 bytes (4.2 MB, 4.0 MiB) copied, 0.521563 s, 8.0 MB/s
>>>> Formatting
mkfs.fat 4.2 (2021-01-31)
mke2fs 1.47.0 (5-Feb-2023)
Creating filesystem with 512000 1k blocks and 128016 inodes
Filesystem UUID: bc929f54-d7da-4fdb-b2db-f149a463395c
Superblock backups stored on blocks:
8193, 24577, 40961, 57345, 73729, 204801, 221185, 401409
Allocating group tables: done
Writing inode tables: done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done
mke2fs 1.47.0 (5-Feb-2023)
Creating filesystem with 302848 4k blocks and 75840 inodes
Filesystem UUID: 2770faaa-860b-4c4a-a3bb-2435cfc6f16d
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912
Allocating group tables: done
Writing inode tables: done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done
>>>> Mounting target filesystem
>>>> Installing base system
I: Keyring file not available at /usr/share/keyrings/debian-archive-keyring.gpg; switching to https mirror https://deb.debian.org/debian
I: Retrieving InRelease
I: Retrieving Packages
I: Validating Packages
I: Resolving dependencies of required packages...
I: Resolving dependencies of base packages...
I: Checking component main on https://deb.debian.org/debian...
I: Retrieving adduser 3.134
I: Validating adduser 3.134
I: Retrieving apt 2.6.1
I: Validating apt 2.6.1
I: Retrieving apt-utils 2.6.1
I: Validating apt-utils 2.6.1
I: Retrieving base-files 12.4+deb12u9
I: Validating base-files 12.4+deb12u9
I: Retrieving base-passwd 3.6.1
I: Validating base-passwd 3.6.1
I: Retrieving bash 5.2.15-2+b7
I: Validating bash 5.2.15-2+b7
...
I: Configuring initramfs-tools...
I: Base system installed successfully.
[sudo] password for schaecsn:
>>>> Creating Swapfile
1+0 records in
1+0 records out
1048576 bytes (1.0 MB, 1.0 MiB) copied, 0.0343232 s, 30.6 MB/s
Setting up swapspace version 1, size = 1020 KiB (1044480 bytes)
no label, UUID=b89db579-d023-4e5b-b194-c148b90f357c
>>>> Mount special file systems
>>>> Checking for updates
Hit:1 http://deb.debian.org/debian bookworm InRelease
Get:2 http://security.debian.org/debian-security bookworm-security InRelease [48.0 kB]
Get:3 http://deb.debian.org/debian bookworm/main Sources [9496 kB]
Get:4 http://security.debian.org/debian-security bookworm-security/contrib Sources [856 B]
Get:5 http://security.debian.org/debian-security bookworm-security/non-free-firmware Sources [796 B]
Get:6 http://security.debian.org/debian-security bookworm-security/main Sources [145 kB]
Get:7 http://security.debian.org/debian-security bookworm-security/main arm64 Packages [242 kB]
Get:8 http://security.debian.org/debian-security bookworm-security/main Translation-en [147 kB]
Get:9 http://security.debian.org/debian-security bookworm-security/contrib arm64 Packages [508 B]
Get:10 http://security.debian.org/debian-security bookworm-security/contrib Translation-en [652 B]
Get:11 http://security.debian.org/debian-security bookworm-security/non-free-firmware Translation-en [472 B]
Get:12 http://deb.debian.org/debian bookworm/non-free-firmware Sources [6436 B]
Get:13 http://deb.debian.org/debian bookworm/non-free Sources [77.9 kB]
Get:14 http://deb.debian.org/debian bookworm/contrib Sources [51.4 kB]
Get:15 http://deb.debian.org/debian bookworm/main Translation-en [6109 kB]
Get:16 http://deb.debian.org/debian bookworm/contrib arm64 Packages [45.6 kB]
Get:17 http://deb.debian.org/debian bookworm/contrib Translation-en [48.8 kB]
Get:18 http://deb.debian.org/debian bookworm/non-free arm64 Packages [75.8 kB]
Get:19 http://deb.debian.org/debian bookworm/non-free Translation-en [67.0 kB]
Get:20 http://deb.debian.org/debian bookworm/non-free-firmware arm64 Packages [5832 B]
Get:21 http://deb.debian.org/debian bookworm/non-free-firmware Translation-en [20.9 kB]
Fetched 16.6 MB in 36s (461 kB/s)
Reading package lists... Done
Reading package lists... Done
Building dependency tree... Done
Calculating upgrade... Done
The following packages will be upgraded:
libgnutls30 libtasn1-6
2 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 1359 kB of archives.
After this operation, 8192 B disk space will be freed.
Get:1 http://security.debian.org/debian-security bookworm-security/main arm64 libtasn1-6 arm64 4.19.0-2+deb12u1 [46.0 kB]
Get:2 http://security.debian.org/debian-security bookworm-security/main arm64 libgnutls30 arm64 3.7.9-2+deb12u4 [1313 kB]
Fetched 1359 kB in 6s (230 kB/s)
E: Can not write log (Is /dev/pts mounted?) - posix_openpt (19: No such device)
(Reading database ... 11702 files and directories currently installed.)
Preparing to unpack .../libtasn1-6_4.19.0-2+deb12u1_arm64.deb ...
Unpacking libtasn1-6:arm64 (4.19.0-2+deb12u1) over (4.19.0-2) ...
Setting up libtasn1-6:arm64 (4.19.0-2+deb12u1) ...
(Reading database ... 11702 files and directories currently installed.)
Preparing to unpack .../libgnutls30_3.7.9-2+deb12u4_arm64.deb ...
Unpacking libgnutls30:arm64 (3.7.9-2+deb12u4) over (3.7.9-2+deb12u3) ...
Setting up libgnutls30:arm64 (3.7.9-2+deb12u4) ...
Processing triggers for libc-bin (2.36-9+deb12u9) ...
>>>> Installed additional firmware files
>>>> Installing kernel
Hit:1 http://security.debian.org/debian-security bookworm-security InRelease
Hit:2 http://deb.debian.org/debian bookworm InRelease
Get:3 https://laban.lysator.liu.se/pub/opensuse/repositories/home:/danielthompson/Debian_Testing ./ InRelease [1549 B]
Ign:3 https://laban.lysator.liu.se/pub/opensuse/repositories/home:/danielthompson/Debian_Testing ./ InRelease
Get:4 https://laban.lysator.liu.se/pub/opensuse/repositories/home:/danielthompson/Debian_Testing ./ Packages [2495 B]
Fetched 4044 B in 4s (1053 B/s)
Reading package lists... Done
W: GPG error: https://laban.lysator.liu.se/pub/opensuse/repositories/home:/danielthompson/Debian_Testing ./ InRelease: The following signatures were invalid: EXPKEYSIG 1CC38EB6DADC6EA2 home:danielthompson OBS Project <home:danielthompson@build.opensuse.org>
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following additional packages will be installed:
linux-image-5.7.0-2-pinebookpro-arm64
The following NEW packages will be installed:
linux-image-5.7.0-2-pinebookpro-arm64 linux-image-pinebookpro-arm64
0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 34.0 MB of archives.
After this operation, 173 MB of additional disk space will be used.
Get:1 https://laban.lysator.liu.se/pub/opensuse/repositories/home:/danielthompson/Debian_Testing ./ linux-image-5.7.0-2-pinebookpro-arm64 5.7.19-30-geadcd756eb47-1 [34.0 MB]
Get:2 https://laban.lysator.liu.se/pub/opensuse/repositories/home:/danielthompson/Debian_Testing ./ linux-image-pinebookpro-arm64 5.7.19-30-geadcd756eb47-1 [1664 B]
Fetched 34.0 MB in 1min 5s (526 kB/s)
E: Can not write log (Is /dev/pts mounted?) - posix_openpt (19: No such device)
Selecting previously unselected package linux-image-5.7.0-2-pinebookpro-arm64.
(Reading database ... 11702 files and directories currently installed.)
Preparing to unpack .../linux-image-5.7.0-2-pinebookpro-arm64_5.7.19-30-geadcd756eb47-1_arm64.deb ...
Unpacking linux-image-5.7.0-2-pinebookpro-arm64 (5.7.19-30-geadcd756eb47-1) ...
electing previously unselected package linux-image-pinebookpro-arm64.
Preparing to unpack .../linux-image-pinebookpro-arm64_5.7.19-30-geadcd756eb47-1_arm64.deb ...
Unpacking linux-image-pinebookpro-arm64 (5.7.19-30-geadcd756eb47-1) ...
Setting up linux-image-5.7.0-2-pinebookpro-arm64 (5.7.19-30-geadcd756eb47-1) ...
update-initramfs: Generating /boot/initrd.img-5.7.0-2-pinebookpro-arm64
W: No zstd in /usr/bin:/sbin:/bin, using gzip
W: Possible missing firmware /lib/firmware/ene-ub6250/ms_rdwr.bin for built-in driver ums_eneub6250
W: Possible missing firmware /lib/firmware/ene-ub6250/msp_rdwr.bin for built-in driver ums_eneub6250
W: Possible missing firmware /lib/firmware/ene-ub6250/ms_init.bin for built-in driver ums_eneub6250
W: Possible missing firmware /lib/firmware/ene-ub6250/sd_rdwr.bin for built-in driver ums_eneub6250
W: Possible missing firmware /lib/firmware/ene-ub6250/sd_init2.bin for built-in driver ums_eneub6250
W: Possible missing firmware /lib/firmware/ene-ub6250/sd_init1.bin for built-in driver ums_eneub6250
W: Possible missing firmware /lib/firmware/xc3028L-v36.fw for built-in driver tuner_xc2028
W: Possible missing firmware /lib/firmware/xc3028-v27.fw for built-in driver tuner_xc2028
W: Possible missing firmware /lib/firmware/dvb-fe-xc5000c-4.1.30.7.fw for built-in driver xc5000
W: Possible missing firmware /lib/firmware/dvb-fe-xc5000-1.6.114.fw for built-in driver xc5000
W: Possible missing firmware /lib/firmware/dvb-fe-xc4000-1.4.fw for built-in driver xc4000
W: Possible missing firmware /lib/firmware/dvb-fe-xc4000-1.4.1.fw for built-in driver xc4000
P: Found /usr/lib/linux-image-5.7.0-2-pinebookpro-arm64/rockchip/rk3399-pinebook-pro.dtb
P: Checking for EXTLINUX directory... not found.
P: Creating EXTLINUX directory... done: /boot/extlinux
P: Writing config for vmlinuz-5.7.0-2-pinebookpro-arm64...
P: Updating /boot/extlinux/extlinux.conf...
Setting up linux-image-pinebookpro-arm64 (5.7.19-30-geadcd756eb47-1) ...
>>>> Basic configuration
Choose a hostname (or press Return to keep default): usb
About to create main user, please enter username: ghost
Adding user `ghost' ...
Adding new group `ghost' (1000) ...
Adding new user `ghost' (1000) with group `ghost (1000)' ...
Creating home directory `/home/ghost' ...
Copying files from `/etc/skel' ...
New password:
Retype new password:
passwd: password updated successfully
Changing the user information for ghost
Enter the new value, or press ENTER for the default
Full Name []: Der Geist der Maschine
Room Number []:
Work Phone []:
Home Phone []:
Other []:
Is the information correct? [Y/n] y
Adding new user `ghost' to supplemental / extra groups `users, users' ...
Adding user `ghost' to group `users' ...
adduser: The user `ghost' is already a member of `users'.
Adding user `ghost' to group `sudo' ...
Done.
Generating locales (this might take a while)...
Generation complete.
Current default time zone: 'US/Pacific'
Local time is now: Fri Mar 14 17:33:18 PDT 2025.
Universal Time is now: Sat Mar 15 00:33:18 UTC 2025.
>>>> Task selection
<text based gui for choosing a desktop environment shows up>
>>>> umount
Booting from usb requires tow-boot which I don't have. Here is a sanity check: /dev/sda5 is the boot partition and we find all the files we expect there.
Code: manjaro:~/pinebook-pro-debian-installer-new$ sudo mount /dev/sda5 /mnt/tmp
manjaro:~/pinebook-pro-debian-installer-new$ ls /mnt/tmp/
System.map-5.7.0-2-pinebookpro-arm64 config-5.7.0-2-pinebookpro-arm64 efi extlinux initrd.img-5.7.0-2-pinebookpro-arm64 lost+found rk3399-pinebook-pro.dtb vmlinuz-5.7.0-2-pinebookpro-arm64
manjaro:~/pinebook-pro-debian-installer-new$ sudo umount /mnt/tmp
If I recall, previously you had some issues with running the debian-installer from Manjaro. I recommend you a) to start from a fresh git clone and b) add "set -x" to the debian installer for verbose output. Then post the whole output and not just single lines.
and I tried again, with ....-new , and got same result
a git clone to a mrfixit sd
-----
>>>> Mounting target filesystem
+ '[' -z '' ']'
+ mkdir -p /home/d/Downloads/pinebook-pro-debian-installer-new/sysimage
+ sudo mount /dev/sda6 /home/d/Downloads/pinebook-pro-debian-installer-new/sysimage
+ sudo mkdir -p /home/d/Downloads/pinebook-pro-debian-installer-new/sysimage/boot
+ sudo mount /dev/sda5 /home/d/Downloads/pinebook-pro-debian-installer-new/sysimage/boot
+ sudo mkdir -p /home/d/Downloads/pinebook-pro-debian-installer-new/sysimage/boot/efi
+ sudo mount /dev/sda4 /home/d/Downloads/pinebook-pro-debian-installer-new/sysimage/boot/efi
+ do_debootstrap
+ printf '\n\n>>>> Installing base system\n\n'
>>>> Installing base system
+ '[' '!' -z ']'
+ '[' '!' -e debootstrap-bookworm-arm64.tar.gz ']'
+ do_real_debootstrap
+ sudo debootstrap --arch=arm64 --include ca-certificates,console-setup,cryptsetup-initramfs,initramfs-tools,locales,keyboard-configuration,sudo,u-boot-menu,gnupg,tasksel bookworm /home/d/Downloads/pinebook-pro-debian-installer-new/sysimage
I: Retrieving InRelease
I: Checking Release signature
E: Release signed by unknown key (key id F8D2585B8783D481)
+ do_umount
+ printf '\n\n>>>> umount\n\n'
>>>> umount
+ for i in boot/efi boot dev proc sys
+ sudo umount /home/d/Downloads/pinebook-pro-debian-installer-new/sysimage/boot/efi
+ true
+ for i in boot/efi boot dev proc sys
+ sudo umount /home/d/Downloads/pinebook-pro-debian-installer-new/sysimage/boot
+ true
+ for i in boot/efi boot dev proc sys
+ sudo umount /home/d/Downloads/pinebook-pro-debian-installer-new/sysimage/dev
umount: /home/d/Downloads/pinebook-pro-debian-installer-new/sysimage/dev: mountpoint not found
+ for i in boot/efi boot dev proc sys
+ sudo umount /home/d/Downloads/pinebook-pro-debian-installer-new/sysimage/proc
umount: /home/d/Downloads/pinebook-pro-debian-installer-new/sysimage/proc: mountpoint not found
+ for i in boot/efi boot dev proc sys
+ sudo umount /home/d/Downloads/pinebook-pro-debian-installer-new/sysimage/sys
umount: /home/d/Downloads/pinebook-pro-debian-installer-new/sysimage/sys: mountpoint not found
+ sudo umount /home/d/Downloads/pinebook-pro-debian-installer-new/sysimage
+ true
+ '[' '!' -z '' ']'
---------
BTW, boot_targets has usb0 in it, before emmc., I'm not sure which socket that is
03-15-2025, 05:30 PM
(This post was last modified: 03-15-2025, 05:37 PM by Der Geist der Maschine.
Edit Reason: complete logs
)
(03-15-2025, 04:51 PM)wdt Wrote: a git clone to a mrfixit sd
+ do_real_debootstrap
+ sudo debootstrap --arch=arm64 --include ca-certificates,console-setup,cryptsetup-initramfs,initramfs-tools,locales,keyboard-configuration,sudo,u-boot-menu,gnupg,tasksel bookworm /home/d/Downloads/pinebook-pro-debian-installer-new/sysimage
I: Retrieving InRelease
I: Checking Release signature
E: Release signed by unknown key (key id F8D2585B8783D481)
Let me quote myself:
Der Geist der Maschine Wrote:Copying over the config files is a hack and I do not know in what follow up issue you may run.
Mr Fixit's debootstrap is very old. A little bit of guesswork: the signature keys come with debootstrap and are too old for the Debian Bookworm packages.
Either manually install a recent debootstrap package on Mr Fixit's Debian 9 or run in the installer from (a somewhat recent) Manjaro. For the latter, see my previous post on how flawless that worked.
Next time, please share the complete logs.
|
