PINE64   ›   PINE A64(+)   ›   Pine A64 Hardware, Accessories and POT   ›   Wifi/BT Module   ›   Board doesn't boot when wifi/Bluetooth connected with Lcd screen

Board doesn't boot when wifi/Bluetooth connected with Lcd screen
Krinilssen
Pine Initiate
**
Joined: Mar 2016
Posts: 9

Reputation: 0
#1
06-15-2016, 05:06 PM
Boots when just wifi/Bluetooth, and boots when just LCD/ Touchscreen. I'm running the android lcd version. When both are in the red light turns off then on and and nothing happens
  Reply
ItsDave
Administrator
*******
Administrators
Joined: May 2016
Posts: 14

Reputation: 8
#2
06-15-2016, 05:14 PM
As the light is going off, i'd say it's power related - are you using a 5v 2A PSU? Also try another cable Smile
  Reply
Krinilssen
Pine Initiate
**
Joined: Mar 2016
Posts: 9

Reputation: 0
#3
06-15-2016, 05:44 PM
Ive tried two cables. One is a 5v 2a power cable and plug in one. What is the PSU part?
  Reply
pfeerick
Moderator
*****
Moderators
Joined: May 2016
Posts: 1,361

Reputation: 118
#4
06-15-2016, 07:09 PM
(06-15-2016, 05:44 PM)Krinilssen Wrote: Ive tried two cables. One is a 5v 2a power cable and plug in one. What is the PSU part?

PSU is shorthand for power supply unit - the bit you plug into the wall that changes 120/240AC to 5v DC for the pine64. Is is your own, or is it the one that pine64 sold? 

A lot of people recommend 5v 2A power supplies for boards like the pine64, and even the lower power Raspberry Pi, as they tend to keep the voltage stable, as a lot of them tend to drop down to 4.9v or lower pretty quickly, and with poor cables, it can easily drop down to 4.5v by the time it reaches the pine64, make it a very unhappy board!
pine64 wiki, linux-sunxi Pine64 wiki, the board/connector layout & pinout of the Raspberry Pi/Euler/EXP connectors
  Reply
Krinilssen
Pine Initiate
**
Joined: Mar 2016
Posts: 9

Reputation: 0
#5
06-16-2016, 07:22 AM
It is my own not a Pine issued one. I plan on testing my Raspberry pi power cable when I'm home. Would that be stable enough for the pine with a lcd/touchscreen and wifi/Bluetooth module attached?
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  [split] Better WiFi/BT module? moriel5 3 5,707 05-18-2022, 01:55 PM
Last Post: moriel5
  WIFI/BT Power Supply / VBAT-EXT xalius 3 5,262 08-12-2021, 06:41 AM
Last Post: Luke490
  Better WiFi/BT module? fonix232 20 27,681 08-11-2021, 09:27 AM
Last Post: Jean-Marc LACROIX
  Wifi / Bluetooth Board Update S265 2 4,564 07-30-2020, 04:53 PM
Last Post: S265
Information Howto: Getting Bluetooth (serial console) working on Debian pfeerick 14 34,094 08-19-2019, 04:33 AM
Last Post: Roverius
  Create a WiFi hotspot on Debian 8 JulianM 6 28,138 03-10-2019, 01:02 AM
Last Post: waqasnasir
  Schematics of Wifi/BT module gamelaster 7 10,697 09-11-2018, 02:02 PM
Last Post: gamelaster
  Installing another WiFi module on one of the buses mido2018 1 3,917 07-22-2018, 07:15 AM
Last Post: tllim
  +LTS/SOPINE Footprint for the recommended Wi-Fi+BT breakout board Madhuwesly 1 3,170 04-09-2018, 04:07 PM
Last Post: tllim
  Unable to activate wifi on Linux smouton 10 17,075 02-21-2018, 09:56 PM
Last Post: dkebler

Forum Jump:


Users browsing this thread: 1 Guest(s)