11-21-2021, 02:16 PM
Hello all,
A couple of months ago I flashed the spi from my RockPro64. It worked and I was able to boot from USB3. Tried it a couple of times just to see how it worked but kept booting from the sd card (I've been using LibreELEC, btw).
The thing is yesterday I got a case to a ssd I had here, connected it to the USB3 and tried to boot. It didn't work. I imagined that it could be due to some lack of support from the relatively old u-boot I had flashed before, so I downloaded the newest version from here. I followed the instructions from here and things at first seemed to have worked fine.
Now the issues:
- First thing I noticed (and that had me thinking the flash proccess worked) is that now I have a verbose boot that I didn't have before. The ssd still doesn't boot from the USB3 port but I noticed it boots from the USB2 (maybe it was already booting from USB2 with the old u-boot, but I didn't do this test before reflashing). When connected to USB 3 it shows a lot of debug messages, but doesn't boot.
- If instead I use an USB flash drive it boots ok (both from USB2 and 3), which makes me think that it's maybe some compatibility issue with my case/adaptor, although it works fine with USB2.
- But the worst part is the audio... After upgrading there's no audio from HDMI, no matter if I boot a LibreELEC img from the sd card or USB2/3. I even tried to erase the spi using the img "erase_spi.img", but it didn't work (at least I think it didn't, because I still can boot from USB and the debug messages still show up).
- I also noticed that if I boot from another img I had here (this time a 'complete' Linux - Manjaro, not LibreELEC) audio works.
I'm attaching the logs I see when booting from the sd card after upgrading u-boot (no HDMI audio):
Is there anything I can do to at least fix the audio? Since I use this RP64 mostly to consume media (LibreELEC) it's essential.
I appreciate any help from someone more experienced.
A couple of months ago I flashed the spi from my RockPro64. It worked and I was able to boot from USB3. Tried it a couple of times just to see how it worked but kept booting from the sd card (I've been using LibreELEC, btw).
The thing is yesterday I got a case to a ssd I had here, connected it to the USB3 and tried to boot. It didn't work. I imagined that it could be due to some lack of support from the relatively old u-boot I had flashed before, so I downloaded the newest version from here. I followed the instructions from here and things at first seemed to have worked fine.
Now the issues:
- First thing I noticed (and that had me thinking the flash proccess worked) is that now I have a verbose boot that I didn't have before. The ssd still doesn't boot from the USB3 port but I noticed it boots from the USB2 (maybe it was already booting from USB2 with the old u-boot, but I didn't do this test before reflashing). When connected to USB 3 it shows a lot of debug messages, but doesn't boot.
- If instead I use an USB flash drive it boots ok (both from USB2 and 3), which makes me think that it's maybe some compatibility issue with my case/adaptor, although it works fine with USB2.
- But the worst part is the audio... After upgrading there's no audio from HDMI, no matter if I boot a LibreELEC img from the sd card or USB2/3. I even tried to erase the spi using the img "erase_spi.img", but it didn't work (at least I think it didn't, because I still can boot from USB and the debug messages still show up).
- I also noticed that if I boot from another img I had here (this time a 'complete' Linux - Manjaro, not LibreELEC) audio works.
I'm attaching the logs I see when booting from the sd card after upgrading u-boot (no HDMI audio):
Quote:Code:U-Boot 2021.04-11556-g9ecacf77d2 (Jun 30 2021 - 17:48:07 +0000) SoC: Rockchip rk3399 Reset cause: POR Model: Pine64 RockPro64 v2.1 DRAM: 3.9GiB PMIC: RX808 MMC: mmc0fe310000: 2, mmc0fe320000: 1, sdhci@fe330000: 0 Loading Environment from SPIFlash... SF: Detected gd25q128 with page size 256 bytes *** Warning - bad CRC, using default environment In: serial Out: vidconsole Err: vidconsole Model: Pine64 RockPro64 v2.1 Net: eth0: ethernet@fe300000 starting USB... Bus usb@fe300000: USB EHCI 1.00 Bus usb@fe3a0000: USB OHCI 1.0 Bus usb@fe3c0000: USB EHCI 1.00 Bus usb@fe3c0000: USB IHCI 1.0 Bus dwc3: usb maximum-speed not found Register 2000130 MbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe30000 for devices... 1 USB DEvice(s) found scanning bus usb@fe3a0000 for devices... 1 USB Device(s) found usb@fe3c0000 for devices... 1 USB Device(s) found usb@fe3c0000 for devices... 1 USB Device(s) found scanning dwc3 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0 Card did not respond to voltage select!: -110 switch to partitions 0, OK mmc1 is cuurent device Scanning mmc 1:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf 220 bytes read in 6 ms (37.1 KiB/s) 1: LibreELEC Retriving file: /KERNEL
Is there anything I can do to at least fix the audio? Since I use this RP64 mostly to consume media (LibreELEC) it's essential.
I appreciate any help from someone more experienced.
