12-18-2017, 10:43 PM
The drive is self-powered (Seagate), so it should not put load on the bus. I cannot power up the drive manually prior to boot, I guess it has to sense the host in the usb3 bus before it does so by itself. So, all this is automatic and can't be avoided.
This is with kernel: 4.4.77-rockchip-ayufan-118. The weird thing is that this boots ok if connected to a usb2 port and usb3 when plugged in about half-way of the boot I(just before it looks for root fs). I don't have any SSDs to test with (or other drives that would have power on already initially). What kernel version does the above mentioned image have?
This is with kernel: 4.4.77-rockchip-ayufan-118. The weird thing is that this boots ok if connected to a usb2 port and usb3 when plugged in about half-way of the boot I(just before it looks for root fs). I don't have any SSDs to test with (or other drives that would have power on already initially). What kernel version does the above mentioned image have?
