Flashing gone wrong

[fxc]

This is a guide, DO NOT just copy and paste these commands

Code:

#download the img
https://github.com/dreemurrs-embedded/Jumpdrive
https://github.com/dreemurrs-embedded/Pine64-Arch/releases
cd ~/Downloads/
#unzip the image
unxz ./pine64-pinephone.img.xz
#(Plug in the SD or Phone card)
lsblk
#make sure it is un mounted
sudo umount /run/media/user/1FAE-0542/
#Copy over. This will take time
sudo dd if=~/Downloads/pine64-pinephone.img of=/dev/sdd status=progress
sudo sync

Thanks for your advice. As I understand it, that's for flashing Jumpdrive to the SD card? I do have that base covered. I can boot the phone from the SD card with JumpDrive on it, I can telnet to it. I can also boot the phone with the OS image on the SD card no problem.

What I am not managing to do is to flash the actual operating system image onto the eMMc storage using JumpDrive.

Flashing to /dev/sdc fails saying there's not space.
Flashing to dev/sdc1 fails saying there's not space.
Flashing to /dev/sdc2 succeeds but phone does not boot.

I would suggest you to not flash via Jumpdrive and instead boot an OS from the microSD card and write to the eMMC from there directly (using dd). Don't write to sdc1 and sdc2, as those are partitions.