08-16-2021, 09:22 PM
Hello,
After using the KDE manjaro distribution for a bit I decided to switch to something more lightweight. i went for the xfce manjaro.
I followed the instructions on this.
https://forum.pine64.org/showthread.php?tid=10403
green booting lights are now amber and after a short moment the uboot menu appears. This was not happening before on the original factory manjaro install. Who else has this happened to?
Now instead of booting straight into the operating system it goes to a uboot menu that looks like this
U-Boot 2021,04-3 (May 14 2021 16:20:42 +0000) Manjaro ARM
SoC: Rockchip rk3399
Reset cause: POR Model: Pine64 Pinebook Pro
DRAM: 3.9 GiB
PMIC: RK808
MMC: mmc@fe310000: 2, mmc@fe320000: 1, sdhciefe330000:0
Loading Environment from SPIFlash... SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
OK
In: serial
Out: vidconsole
Err: vidconsole
Model: Pine64 Pinebook Pro
Net: No ethernet found.
starting USB...
Bus usb@fe3a0000: USB OHCI 1.0 Bus usbefe3e0000: USB OHCI 1.0
scanning bus usbefe3a0000 for devices... 2 USB Device(s) found
scanning bus usbefe3e0000 for devices... 3 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
I want to make the pinebook boot like it used to. Directly into manjaro and with green lights.
How can I configure Uboot to automatically boot the distribution i have flashed on the mmc of the pinebook and get rid of the boot prompts as well as the amber boot light ?
please help if you can thanks.
After using the KDE manjaro distribution for a bit I decided to switch to something more lightweight. i went for the xfce manjaro.
I followed the instructions on this.
https://forum.pine64.org/showthread.php?tid=10403
green booting lights are now amber and after a short moment the uboot menu appears. This was not happening before on the original factory manjaro install. Who else has this happened to?
Now instead of booting straight into the operating system it goes to a uboot menu that looks like this
U-Boot 2021,04-3 (May 14 2021 16:20:42 +0000) Manjaro ARM
SoC: Rockchip rk3399
Reset cause: POR Model: Pine64 Pinebook Pro
DRAM: 3.9 GiB
PMIC: RK808
MMC: mmc@fe310000: 2, mmc@fe320000: 1, sdhciefe330000:0
Loading Environment from SPIFlash... SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
OK
In: serial
Out: vidconsole
Err: vidconsole
Model: Pine64 Pinebook Pro
Net: No ethernet found.
starting USB...
Bus usb@fe3a0000: USB OHCI 1.0 Bus usbefe3e0000: USB OHCI 1.0
scanning bus usbefe3a0000 for devices... 2 USB Device(s) found
scanning bus usbefe3e0000 for devices... 3 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
I want to make the pinebook boot like it used to. Directly into manjaro and with green lights.
How can I configure Uboot to automatically boot the distribution i have flashed on the mmc of the pinebook and get rid of the boot prompts as well as the amber boot light ?
please help if you can thanks.
