07-20-2021, 01:31 PM
Are you getting any signal reading from the modem? Either in status bar or Settings, Mobile, Modem details?
My "reserve" phone does not work because the micro co-ax cable that connects the main board to the bottom USB-C connector board does not connect (mainly as I pulled the connector off the USB-C slave board the 1st time I tried to remove the cable. So modem sort of looks OK but signal level is unusable. Just a thought
My "reserve" phone does not work because the micro co-ax cable that connects the main board to the bottom USB-C connector board does not connect (mainly as I pulled the connector off the USB-C slave board the 1st time I tried to remove the cable. So modem sort of looks OK but signal level is unusable. Just a thought
- PinePhone BraveHeart now v1.2b 3/32Gb daily driver, Tow-boot with pmOS/SXMO on eMMC
- PinePhone pmOS Community Edition 2/16Gb driving my picture frame, Tow-boot with pmOS/SXMO on eMMC
- PinePhone Pro Explorer Edition, Tow-boot on SPI, Arch/SXMO on eMMC
- ROCKPro64 v2.1 2GB, 16Gb eMMC retired in favour of a fruity upgrade