Kernel panic on boot with danielt's Debian installer
#1
Apparently danielt's Debian installer is now mainstream enough it doesn't need it's own dedicated thread!

I'm trying to use this on my brand new PBP, but it kernel panics on startup on boot. I haven't modified the installation at all (yet).

The crash happens at T+13s, well into multiuser startup, and I've pasted the relevant bits blow (does this forum have an attach button? I can't find one). The reference to gpio-key-power looks suspicious.

The kernel version the installer used is linux-image-pinebookpro-arm64 (5.7.19-30-geadcd756eb47-1). Is this new, by any chance? Any ideas of workarounds?

Code:
[   11.094664] raid6: neonx2   gen()  2396 MB/s
[   11.264662] raid6: neonx2   xor()  1654 MB/s
[   11.434664] raid6: neonx1   gen()  2065 MB/s
[   11.456511] input: gpio-key-power as /devices/platform/gpio-key-power/input/input9
[   11.456641] Unable to handle kernel write to read-only memory at virtual address ffff000002df9000
[   11.462979] Mem abort info:
[   11.463231]   ESR = 0x9600004e
[   11.463507]   EC = 0x25: DABT (current EL), IL = 32 bits
[   11.463975]   SET = 0, FnV = 0
[   11.464247]   EA = 0, S1PTW = 0
[   11.464527] Data abort info:
[   11.464784]   ISV = 0, ISS = 0x0000004e
[   11.465124]   CM = 0, WnR = 1
[   11.465393] swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000033d0000
[   11.465981] [ffff000002df9000] pgd=00000000f7ff8003, pud=00000000f7ff7003, pmd=0060000002c00791
[   11.466751] Internal error: Oops: 9600004e [#1] PREEMPT SMP
[   11.467242] Modules linked in: btsdio hci_uart brcmfmac btqca btbcm
btintel rockchip_rga gpio_keys(+) raid6_pq(+) panfrost videobuf2_dma_sg
bluetooth hid_multitouch(+) dw_wdt ecdh_generic ecc cw2015_battery
snd_soc_hdmi_codec configfs dm_crypt gpu_sched nf_defrag_ipv6 pwm_fan
cfg80211 rfkill brcmutil nvme nvme_core snd_soc_simple_amplifier
snd_soc_rockchip_i2s snd_soc_rockchip_pcm rockchip_thermal rockchipdrm
analogix_dp dw_hdmi snd_soc_es8316 panel_simple cec dw_mipi_dsi
drm_kms_helper syscopyarea rockchip_saradc sysfillrect sysimgblt
fb_sys_fops uvcvideo drm pwm_bl snd_soc_simple_card
snd_soc_simple_card_utils drm_panel_orientation_quirks
[   11.472245] CPU: 4 PID: 0 Comm: swapper/4 Not tainted 5.7.0-2-pinebookpro-arm64 #1
[   11.472909] Hardware name: Pine64 Pinebook Pro (DT)
[   11.473342] pstate: 000001c5 (nzcv dAIF -PAN -UAO)
[   11.473776] pc : __memcpy+0x48/0x180
  Reply


Messages In This Thread
Kernel panic on boot with danielt's Debian installer - by hjalfi - 06-03-2021, 03:59 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Pinebook pro won't boot after bootloader installation jwensouls 4 936 08-21-2024, 04:17 AM
Last Post: KC9UDX
  Official Debian support moonwalkers 64 64,266 07-08-2024, 01:40 PM
Last Post: Humid Stylus
  Debian on Pinebook Pro u974615 7 2,891 03-31-2024, 10:11 AM
Last Post: u974615
  Need Help Recovering Manjaro /boot Contents on Pinebook Pro calinb 6 3,511 12-11-2023, 03:47 AM
Last Post: calinb
  Boot Order in Pinebook Pro food 8 2,697 11-23-2023, 07:37 AM
Last Post: KC9UDX
  install debian on pbp jsch 7 5,396 11-22-2023, 04:22 PM
Last Post: TRS-80
  How to mainline kernel on daniel thompson's debian installer? hellojack 14 9,827 09-07-2023, 09:38 PM
Last Post: Der Geist der Maschine
  [Manjaro] u-boot won't boot from eMMC with (unbootable) SD card present zackw 1 2,491 08-21-2023, 09:08 PM
Last Post: vanessadonald
  Unable to install Debian Bullseye because of missing wifi firmware Pino64 7 5,367 07-15-2023, 02:58 PM
Last Post: u974615
  Emergency Mode Boot Hotkey? jiacovelli 20 7,492 06-02-2023, 01:32 PM
Last Post: wdt

Forum Jump:


Users browsing this thread: 8 Guest(s)