(02-08-2021, 10:05 PM)pjsf Wrote:Code:sudo inxi -n
Network:
Device-1: mmc-pwrseq-simple driver: pwrseq_simple
Device-2: sun50i-a64-emac driver: N/A
IF: usb0 state: down mac: 46:37:8b:0c:73:e1
IF-ID-1: wlan0 state: down mac: 26:3e:35:b2:89:8a
wlan0 unassociated Nickname:"<WIFI@REALTEK>"Code:sudo iwconfig
Mode:Managed Frequency=2.412 GHz Access Point: Not-Associated
Sensitivity:0/0
Retry:off RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
globalCode:sudo iw reg get
country 00: DFS-UNSET
(2402 - 2472 @ 40), (6, 20), (N/A)
(2457 - 2482 @ 20), (6, 20), (N/A), AUTO-BW, PASSIVE-SCAN
(2474 - 2494 @ 20), (6, 20), (N/A), NO-OFDM, PASSIVE-SCAN
(5170 - 5250 @ 80), (6, 20), (N/A), AUTO-BW, PASSIVE-SCAN
(5250 - 5330 @ 80), (6, 20), (0 ms), DFS, AUTO-BW, PASSIVE-SCAN
(5490 - 5730 @ 160), (6, 20), (0 ms), DFS, PASSIVE-SCAN
(5735 - 5835 @ 80), (6, 20), (N/A), PASSIVE-SCAN
(57240 - 63720 @ 2160), (N/A, 0), (N/A)
I've also set the country code successfully, but it makes no real difference.
Maybe an HW (power) issue, but from the output it's recognized correctly but seems soft blocked!?
You probably know that already, but I would recommend the following:
Code:
sudo rfkill list
If it shows "soft blocked yes", you can unblock with
Code:
sudo rfkill unblock 0
I would also recommend to (once again) set the correct country code with:
Code:
#Change "XX" to your country code, e.g. "DE" for Germany
sudo iw reg set XX
Make it permanent in the crda file (REGDOMAIN=XX) in
Code:
sudo nano /etc/default/crda