12-04-2020, 09:09 PM
(This post was last modified: 12-04-2020, 09:45 PM by jtremblant.
Edit Reason: made a mistake
)
@dukla2000
I don't have a PineBookPro or RockPro64 but image by default is set to RockPi4C. It sounds like you're using the wrong dtb file.
I did successfully test it booting from NVMe on RockPi4C only.
Please follow the instructions below:
- edit /boot/armbianEnv.txt
- replace the dtb name with rk3399-pinebook-pro.dtb or whatever RK3399 board you have, check dtb folder to know the exact name you need to type.
- Enjoy
Don't forget to resize partition after first boot
I don't have a PineBookPro or RockPro64 but image by default is set to RockPi4C. It sounds like you're using the wrong dtb file.
I did successfully test it booting from NVMe on RockPi4C only.
Please follow the instructions below:
- edit /boot/armbianEnv.txt
- replace the dtb name with rk3399-pinebook-pro.dtb or whatever RK3399 board you have, check dtb folder to know the exact name you need to type.
- Enjoy
Don't forget to resize partition after first boot