Nvidia GPU on PCIe
#1
working on trying to get a GPU running on the RockPro64.

im well aware of the bar limitations, as well as the PCIe power requirements.

i plan on playing around with the dts to try and mitigate bar issues, the GPU will only be running compute and not graphics.

i have an external PCIe power supply for taking care of powering the PCIe bus, i have tested this on a laptop and it works just fine with the laptop, but not in the RockPro64.

the issue im currently running into is when i hook up the GPU to the rockpro64 it just simply wont boot.

was hoping if anybody had any suggestions, or experience on making this work?


Messages In This Thread
Nvidia GPU on PCIe - by User 18962 - 11-10-2020, 05:26 PM
RE: Nvidia GPU on PCIe - by Ceazer - 12-10-2020, 10:33 PM
RE: Nvidia GPU on PCIe - by User 18962 - 12-14-2020, 02:35 PM
RE: Nvidia GPU on PCIe - by xmixahlx - 12-22-2020, 01:57 PM
RE: Nvidia GPU on PCIe - by amiraeva - 12-22-2020, 02:54 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Compatible PCIe Sata Controller spacebricker 1 3,460 02-06-2023, 10:03 AM
Last Post: diizzy
  PCIe bifurcation support (on RK3399) Arn 1 3,358 11-28-2022, 05:12 PM
Last Post: tllim
  RockPro64 doesn't boot when PCIe to M.2 adapter is installed Cerberus 3 5,898 11-27-2021, 11:38 PM
Last Post: Cerberus
  Carte PCIe bloquant le démarrage du Noyau / PCIe card blocking Kernel boot dml-pc 4 7,706 02-17-2021, 11:35 AM
Last Post: dml-pc
  Won't boot with 2.5GBe PCIe adaptor connected voltagex 1 4,030 10-20-2020, 12:22 PM
Last Post: xmixahlx
  RockPro64 pcie Gpu Davidos 8 19,771 07-14-2020, 05:11 PM
Last Post: ProDigit
  PCIe failure odhinnhrafn 11 16,987 03-16-2020, 08:39 AM
Last Post: odhinnhrafn
Question Can we add PCIE hub 1 to many pcie card seaurchin 1 4,332 11-25-2019, 11:08 AM
Last Post: tllim
  Tested PCIe cards and output kram0000 5 8,541 10-24-2019, 01:17 PM
Last Post: xalius
  12V 3A power supply and NVMe - PCIe kaylios 3 7,759 08-25-2019, 03:31 AM
Last Post: kaylios

Forum Jump:


Users browsing this thread: 1 Guest(s)