11-02-2020, 08:43 PM
i love my c4 labs case
i had to modify it a bit because i couldn't get the correct battery from pine so i used a 5000mAh battery from a broken tablet. i had to use a 2mm sheet of acrylic to add a plate and change the other internal plate, to get the 2 wire battery to work i took the charge circuit and temp sensor from the 18650 power bank for the pine, i removed the battery terminals for the 18650 and removed the glass fuse, them i connected it to the lipo and put it i next to it the lipo battery also has its own bms so it works, i dont need a fan on mine but i do have a heat sink
the next upgrades id like is internal sound and a accelerometer,
i have a amp and speaker mounted in it but trying to work out how to get the audio signal from the pine to the amp
i had to modify it a bit because i couldn't get the correct battery from pine so i used a 5000mAh battery from a broken tablet. i had to use a 2mm sheet of acrylic to add a plate and change the other internal plate, to get the 2 wire battery to work i took the charge circuit and temp sensor from the 18650 power bank for the pine, i removed the battery terminals for the 18650 and removed the glass fuse, them i connected it to the lipo and put it i next to it the lipo battery also has its own bms so it works, i dont need a fan on mine but i do have a heat sink
the next upgrades id like is internal sound and a accelerometer,
i have a amp and speaker mounted in it but trying to work out how to get the audio signal from the pine to the amp
