10-31-2020, 08:14 PM
(This post was last modified: 11-01-2020, 02:12 AM by ChrisEvans.)
I did manage to get it working, using the SD, thanks you for that suggestion.
It took me a bit to figure out how to do this, and I may have did it wrong so here are the steps I did:
1. Get an microSD card (I got 128 GB)
2. Download Phosh beta1 ISO https://osdn.net/projects/manjaro-arm/st...one/phosh/
3. Followed the instruction for flashing the SD card https://wiki.pine64.org/wiki/NOOB#Step-b...roSD_Cards
4. Insert the SD card and put the battery back in
I hoped it would work automatically, but it didn't. I had to hold the RESET pin hole down for 10 seconds and let go, and then it started working.
It is a little bit slow right now, I am wondering if that is the beta or because it is running from the SD card. My understanding may be incorrect, but tomorrow I am gonna see if I can install the OS in eMMC using JumpDrive to see if that helps. JumpDrive steps are talked about here https://wiki.pine64.org/wiki/PinePhone.
It took me a bit to figure out how to do this, and I may have did it wrong so here are the steps I did:
1. Get an microSD card (I got 128 GB)
2. Download Phosh beta1 ISO https://osdn.net/projects/manjaro-arm/st...one/phosh/
3. Followed the instruction for flashing the SD card https://wiki.pine64.org/wiki/NOOB#Step-b...roSD_Cards
4. Insert the SD card and put the battery back in
I hoped it would work automatically, but it didn't. I had to hold the RESET pin hole down for 10 seconds and let go, and then it started working.
It is a little bit slow right now, I am wondering if that is the beta or because it is running from the SD card. My understanding may be incorrect, but tomorrow I am gonna see if I can install the OS in eMMC using JumpDrive to see if that helps. JumpDrive steps are talked about here https://wiki.pine64.org/wiki/PinePhone.
