10-10-2020, 01:27 PM
Hi
ive read other posts and im trying to establish if my board has a HW issue.
ive flashed some raspberry pi (32 bit) previously so i believe im flashing my sd card ok.
i gave a green led on longside the power connector
i have a solid red and a while led on by the gpio pins.
the activity led on the nic port (on the usb side of the port) is solid amber regardless of cable in or out
the other nic led is always off.
the power button longside the white led turns all but the green led off.
there is no hdmi output .
what do i do next to determine if its a brick or not
ive read other posts and im trying to establish if my board has a HW issue.
ive flashed some raspberry pi (32 bit) previously so i believe im flashing my sd card ok.
i gave a green led on longside the power connector
i have a solid red and a while led on by the gpio pins.
the activity led on the nic port (on the usb side of the port) is solid amber regardless of cable in or out
the other nic led is always off.
the power button longside the white led turns all but the green led off.
there is no hdmi output .
what do i do next to determine if its a brick or not