Python GPIO Library for the Rock64 (R64.GPIO)

[quinterro]

I can run under Ubuntu, but can't run the test script under Armbian. Using python3 I get:

Code:

root@rock64:/home/sas# python3 gpio_test.py  Testing R64.GPIO Module... Module Variables: Name           Value ----           ----- GPIO.ROCK      ROCK GPIO.BOARD     BOARD GPIO.BCM       BCM GPIO.OUT       out GPIO.IN        in GPIO.HIGH      1 GPIO.LOW       0 GPIO.PUD_UP    0 GPIO.PUD_DOWN  1 GPIO.VERSION   0.6.3 GPIO.RPI_INFO  {'RAM': '1024M', 'PROCESSOR': 'BCM2837', 'TYPE': 'Pi 3 Model B', 'REVISION': 'a22082', 'P1_REVISION': 3, 'MANUFACTURER': 'Embest'} Error: Unable to export GPIO Error: Unable to set GPIO direction Error: Unable to export GPIO Error: Unable to set GPIO direction Testing GPIO Input/Output: You must setup() the GPIO channel ({0} {1}) first Traceback (most recent call last):   File "gpio_test.py", line 42, in <module>     var_gpio_state = GPIO.input(var_gpio_out)                   # Return state of GPIO   File "/home/sas/R64/_GPIO.py", line 210, in input     if validate_direction(channel, 'both') == 0:   File "/home/sas/R64/_GPIO.py", line 118, in validate_direction     print("You must setup() the GPIO channel ({0} {1}) first").format(gpio_mode, channel) AttributeError: 'NoneType' object has no attribute 'format'

I was getting a similar error when running the test Python file from the terminal using the Armbian_20.08.1_Rock64_bionic_legace_4.4.213_desktop image. I did get it to work using sudo.

To get it to work without sudo I ran the following command from the terminal based on the discussion at https://forum.armbian.com/topic/8714-gpi...-non-root/:

chmod 4775 /usr/bin/python

I don't know secure this is but it worked.

I tried the steps from https://forum.pine64.org/showthread.php?tid=2233 without success.