08-09-2020, 01:05 PM
Same problem.
I've successfully downgraded kernel using qemu-arm-static (from AUR) to chroot from x86_64 laptop into the root filesystem on emmc. But the questions still remain: what is wrong with kernel, and how to fix this?
Code:
DDR version 1.06 20170424
In
LPDDR3
786MHz
Bus Width=32 Col=11 Bank=8 Row=15/15 CS=2 Die Bus-Width=32 Size=4096MB
ddrconfig:7
OUT
Boot1 Release Time: 2017-05-18, version: 2.43
ChipType = 0x11, 127
SdmmcInit=2 0
BootCapSize=2000
UserCapSize=14800MB
FwPartOffset=2000 , 2000
SdmmcInit=0 2
StorageInit ok = 20837
Raw SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit ret = 0, SecureMode = 0
LoadTrustBL
No find bl30.bin
No find bl32.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0x8b0ec
RunBL31 0x10000
NOTICE: BL31: v1.3(debug):f947c7e
NOTICE: BL31: Built : 09:28:45, May 31 2017
NOTICE: BL31:Rockchip release version: v1.3
INFO: ARM GICv2 driver initialized
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 1
INFO: plat_rockchip_pmu_init: pd status 0xe
INFO: BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR: Error initializing runtime service opteed_fast
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2018.03-1 (Apr 02 2018 - 19:14:47 -0600) Arch Linux ARM
Model: Rockchip RK3328 EVB
DRAM: 4 GiB
MMC: rksdmmc@ff500000: 1, rksdmmc@ff520000: 0
Loading Environment from MMC... Card did not respond to voltage select!
*** Warning - No block device, using default environment
Failed (-5)
In: serial@ff130000
Out: serial@ff130000
Err: serial@ff130000
Model: Rockchip RK3328 EVB
Net:
Warning: ethernet@ff540000 (eth0) using random MAC address - ea:2f:54:3a:3b:6d
eth0: ethernet@ff540000
Hit any key to stop autoboot: 2 1 0
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
1269 bytes read in 17 ms (72.3 KiB/s)
## Executing script at 00500000
37171712 bytes read in 29273 ms (1.2 MiB/s)
50174 bytes read in 50 ms (979.5 KiB/s)
8102566 bytes read in 6588 ms (1.2 MiB/s)
## Flattened Device Tree blob at 01f00000
Booting using the fdt blob at 0x1f00000
Loading Ramdisk to fc762000, end fcf1c2a6 ... OK
reserving fdt memory region: addr=1f00000 size=d000
Loading Device Tree to 00000000fc752000, end 00000000fc761fff ... OK
Starting kernel ...I've successfully downgraded kernel using qemu-arm-static (from AUR) to chroot from x86_64 laptop into the root filesystem on emmc. But the questions still remain: what is wrong with kernel, and how to fix this?
