PBP not powering up (anymore)

[spikerguy]

Hi there,

after waiting for such a loooong time, I finally got my PBP on Friday.

Over the weekend I played around a little bit with Manjaro and then wanted to try a different OS. After repartitioning the eMMC, I accidentally pressed the false delete key (i.e. the power button) and the system shut down. Since then I can't get the PBP powering up anymore. Neither a USB stick (the one I used for the interrupted installation) nor an SD card with the Manjaro KDE image does the job.

I don't really understand what's wrong since at least the SD card should do the trick. A hardware failure just in that unfortunate moment would be a big coincidence. But what else could it be and most importantly: how can I get it fixed?


Anyone got a lifesaving clue?

Thanks!
Criena

Can you share the OS dsitro image you were trying to flash when you accidentally powered off the device? This is give us a better understanding on what the uboot is trying to do.

Also the last option would be to enable uart and get uart logs, this will need uart cable used for pinebookpro.

As everyone have already advised you about booting from SD card then you might have to try a different sd card. You should try all the major os images like debian from mrfixit should definitely work as it is using bsp uboot. 

Try different sd card and report back.

Good luck.