03-12-2020, 04:39 AM
Noticing that u-boot was applying dtb file for RockPro64, I moved the RockPro64 dtb file and replaced it with dtb file for my device (Rock-Pi-4).
Result: it does not reach developer console, similar to output posted by @tophneal earlier:
Result: it does not reach developer console, similar to output posted by @tophneal earlier:
Code:
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.5.0-MANJARO-ARM+ (brent@brent-pc) (gcc version 4.9.x 20150123 (prerelease) (4.9.2_cos_gg_4.9.2-r223-ac6128e0a17a52f011797f33ac3e7d620
[ 0.000000] Machine model: Radxa ROCK Pi 4
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 64 MiB at 0x00000000f4000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 34 pages/cpu s101400 r8192 d29672 u139264
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 991752
[ 0.000000] Kernel command line: earlyprintk console=ttyS2,1500000n8 rw root=/dev/mmcblk1p3 rootfstype=ext4 init=/sbin/init rootwait cros_debug loglevel=7 dm_ved
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x3bfff000-0x3ffff000] (64MB)
[ 0.000000] Memory: 3788564K/4030464K available (13628K kernel code, 838K rwdata, 5448K rodata, 1216K init, 8475K bss, 176364K reserved, 65536K cma-reserved)
[ 0.000000] random: get_random_u64 called from cache_random_seq_create+0x78/0x130 with crng_init=0
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 256 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: no VLPI support, no direct LPI support, no RVPEID support
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @eec80000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x00000000eec40000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000eec50000
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.001054] Console: colour dummy device 80x25
[ 0.001098] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.001109] pid_max: default: 32768 minimum: 301
[ 0.001267] LSM: Security Framework initializing
[ 0.001285] Yama: becoming mindful.
[ 0.001367] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.001391] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.001450] *** VALIDATE tmpfs ***
[ 0.001947] *** VALIDATE proc ***
[ 0.002203] *** VALIDATE cgroup1 ***
[ 0.002212] *** VALIDATE cgroup2 ***
[ 0.003123] ASID allocator initialised with 65536 entries
[ 0.003210] rcu: Hierarchical SRCU implementation.
[ 0.003447] Platform MSI: interrupt-controller@fee20000 domain created
[ 0.003782] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.004310] EFI services will not be available.
[ 0.004714] smp: Bringing up secondary CPUs ...
[ 0.005198] Detected VIPT I-cache on CPU1
[ 0.005231] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[ 0.005246] GICv3: CPU1: using allocated LPI pending table @0x00000000eec60000
[ 0.005289] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.005838] Detected VIPT I-cache on CPU2
[ 0.005862] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[ 0.005873] GICv3: CPU2: using allocated LPI pending table @0x00000000eec70000
[ 0.005898] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.006394] Detected VIPT I-cache on CPU3
[ 0.006416] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[ 0.006426] GICv3: CPU3: using allocated LPI pending table @0x00000000eed00000
[ 0.006449] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.006948] CPU features: detected: EL2 vector hardening
[ 0.006954] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[ 0.006959] CPU features: detected: ARM erratum 1319367
[ 0.006963] Detected PIPT I-cache on CPU4
[ 0.006988] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[ 0.006999] GICv3: CPU4: using allocated LPI pending table @0x00000000eed10000
[ 0.007026] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[ 0.007549] Detected PIPT I-cache on CPU5
[ 0.007570] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[ 0.007579] GICv3: CPU5: using allocated LPI pending table @0x00000000eed20000
[ 0.007601] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[ 0.007684] smp: Brought up 1 node, 6 CPUs
[ 0.007736] SMP: Total of 6 processors activated.
[ 0.007744] CPU features: detected: 32-bit EL0 Support
[ 0.007751] CPU features: detected: CRC32 instructions
[ 0.034793] CPU: All CPU(s) started at EL2
[ 0.034879] alternatives: patching kernel code
[ 0.037317] devtmpfs: initialized
[ 0.045316] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.045336] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.047905] pinctrl core: initialized pinctrl subsystem
[ 0.048732] thermal_sys: Registered thermal governor 'fair_share'
[ 0.048735] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.048744] thermal_sys: Registered thermal governor 'step_wise'
[ 0.048750] thermal_sys: Registered thermal governor 'user_space'
[ 0.049205] DMI not present or invalid.
[ 0.049687] NET: Registered protocol family 16
[ 0.051630] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.052551] cpuidle: using governor ladder
[ 0.052568] cpuidle: using governor menu
[ 0.052937] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.053167] Serial: AMBA PL011 UART driver
[ 0.077926] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.077935] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.077942] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.077948] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.088968] cryptd: max_cpu_qlen set to 1000
[ 0.114115] ACPI: Interpreter disabled.
[ 0.114509] vcc5v0_sys: supplied by vcc12v_dcin
[ 0.114801] vcc3v3_pcie: supplied by vcc5v0_sys
[ 0.114995] vcc3v3_sys: supplied by vcc5v0_sys
[ 0.115257] vcc5v0_host: supplied by vcc5v0_sys
[ 0.115495] vcc5v0_typec: supplied by vcc5v0_sys
[ 0.116078] iommu: Default domain type: Translated
[ 0.117650] vgaarb: loaded
[ 0.118281] SCSI subsystem initialized
[ 0.118570] usbcore: registered new interface driver usbfs
[ 0.118599] usbcore: registered new interface driver hub
[ 0.118662] usbcore: registered new device driver usb
[ 0.119014] mc: Linux media interface: v0.10
[ 0.119036] videodev: Linux video capture interface: v2.00
[ 0.119066] pps_core: LinuxPPS API ver. 1 registered
[ 0.119070] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.119093] PTP clock support registered
[ 0.119245] EDAC MC: Ver: 3.0.0
[ 0.119747] Advanced Linux Sound Architecture Driver Initialized.
[ 0.120088] NetLabel: Initializing
[ 0.120094] NetLabel: domain hash size = 128
[ 0.120099] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.120154] NetLabel: unlabeled traffic allowed by default
[ 0.120589] clocksource: Switched to clocksource arch_sys_counter
[ 0.120599] *** VALIDATE bpf ***
[ 0.120750] VFS: Disk quotas dquot_6.6.0
[ 0.120799] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.120851] *** VALIDATE ramfs ***
[ 0.120865] *** VALIDATE hugetlbfs ***
[ 0.121140] pnp: PnP ACPI: disabled
[ 0.125704] NET: Registered protocol family 2
[ 0.126197] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.126257] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.126516] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.127006] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.127114] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.127214] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.127447] NET: Registered protocol family 1
[ 0.127886] RPC: Registered named UNIX socket transport module.
[ 0.127893] RPC: Registered udp transport module.
[ 0.127897] RPC: Registered tcp transport module.
[ 0.127902] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.127911] PCI: CLS 0 bytes, default 64
[ 0.128847] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.129074] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.129382] kvm [1]: IPA Size Limit: 40bits
[ 0.130732] kvm [1]: vgic-v2@fff20000
[ 0.130755] kvm [1]: GIC system register CPU interface enabled
[ 0.130899] kvm [1]: vgic interrupt IRQ10
[ 0.131057] kvm [1]: Hyp mode initialized successfully
[ 0.177207] Initialise system trusted keyrings
[ 0.177338] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 0.182107] zbud: loaded
[ 0.183979] NFS: Registering the id_resolver key type
[ 0.184004] Key type id_resolver registered
[ 0.184010] Key type id_legacy registered
[ 0.184023] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.184057] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.184358] fuse: init (API version 7.31)
[ 0.184428] *** VALIDATE fuse ***
[ 0.184439] *** VALIDATE fuse ***
[ 0.184696] SGI XFS with ACLs, security attributes, quota, no debug enabled
[ 0.186022] *** VALIDATE xfs ***
[ 0.206043] NET: Registered protocol family 38
[ 0.206058] Key type asymmetric registered
[ 0.206064] Asymmetric key parser 'x509' registered
[ 0.206104] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[ 0.206226] io scheduler mq-deadline registered
[ 0.206232] io scheduler kyber registered
[ 0.206330] io scheduler bfq registered
[ 0.212669] IPMI message handler: version 39.2
[ 0.213822] dma-pl330 ff6d0000.dma-controller: WARN: Device release is not defined so it is not safe to unbind this driver while in use
[ 0.214243] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.214252] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[ 0.214408] dma-pl330 ff6e0000.dma-controller: WARN: Device release is not defined so it is not safe to unbind this driver while in use
[ 0.215090] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.215099] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 0.216132] pwm-regulator: supplied by regulator-dummy
[ 0.216777] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.218042] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 35, base_baud = 1500000) is a 16550A
[ 0.218148] serial serial0: tty port ttyS0 registered
[ 0.218492] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 36, base_baud = 1500000) is a 16550A
[ 0.320700] printk: console [ttyS2] enabled
[ 0.322763] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.325616] libphy: Fixed MDIO Bus: probed
[ 0.326038] usbcore: registered new interface driver asix
[ 0.331734] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port
[ 0.338948] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.339522] ehci-pci: EHCI PCI platform driver
[ 0.339936] ehci-platform: EHCI generic platform driver
[ 0.342550] ehci-platform fe380000.usb: EHCI Host Controller
[ 0.343150] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[ 0.343917] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
[ 0.370602] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[ 0.371252] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
[ 0.371977] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.372610] usb usb1: Product: EHCI Host Controller
[ 0.373039] usb usb1: Manufacturer: Linux 5.5.0-MANJARO-ARM+ ehci_hcd
[ 0.373602] usb usb1: SerialNumber: fe380000.usb
[ 0.374330] hub 1-0:1.0: USB hub found
[ 0.374685] hub 1-0:1.0: 1 port detected
[ 0.377383] ehci-platform fe3c0000.usb: EHCI Host Controller
[ 0.377977] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[ 0.378730] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
[ 0.400605] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[ 0.401256] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
[ 0.401980] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.402614] usb usb2: Product: EHCI Host Controller
[ 0.403042] usb usb2: Manufacturer: Linux 5.5.0-MANJARO-ARM+ ehci_hcd
[ 0.403607] usb usb2: SerialNumber: fe3c0000.usb
[ 0.404298] hub 2-0:1.0: USB hub found
[ 0.404647] hub 2-0:1.0: 1 port detected
[ 0.405380] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.405930] ohci-pci: OHCI PCI platform driver
[ 0.406362] ohci-platform: OHCI generic platform driver
[ 0.406973] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[ 0.407657] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[ 0.408409] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
[ 0.474745] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.05
[ 0.475470] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.476103] usb usb3: Product: Generic Platform OHCI controller
[ 0.476623] usb usb3: Manufacturer: Linux 5.5.0-MANJARO-ARM+ ohci_hcd
[ 0.477187] usb usb3: SerialNumber: fe3a0000.usb
[ 0.477883] hub 3-0:1.0: USB hub found
[ 0.478238] hub 3-0:1.0: 1 port detected
[ 0.478896] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[ 0.479582] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[ 0.480329] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
[ 0.554838] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.05
[ 0.555567] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.556201] usb usb4: Product: Generic Platform OHCI controller
[ 0.556722] usb usb4: Manufacturer: Linux 5.5.0-MANJARO-ARM+ ohci_hcd
[ 0.557288] usb usb4: SerialNumber: fe3e0000.usb
[ 0.558201] hub 4-0:1.0: USB hub found
[ 0.558560] hub 4-0:1.0: 1 port detected
[ 0.559470] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.560771] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 0.561402] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
[ 0.562203] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[ 0.563045] xhci-hcd xhci-hcd.0.auto: irq 224, io mem 0xfe800000
[ 0.563852] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
[ 0.564579] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.565212] usb usb5: Product: xHCI Host Controller
[ 0.565644] usb usb5: Manufacturer: Linux 5.5.0-MANJARO-ARM+ xhci-hcd
[ 0.566209] usb usb5: SerialNumber: xhci-hcd.0.auto
[ 0.567045] hub 5-0:1.0: USB hub found
[ 0.567403] hub 5-0:1.0: 1 port detected
[ 0.568036] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 0.568640] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
[ 0.569320] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 0.569946] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.570774] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.05
[ 0.571500] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.572134] usb usb6: Product: xHCI Host Controller
[ 0.572565] usb usb6: Manufacturer: Linux 5.5.0-MANJARO-ARM+ xhci-hcd
[ 0.573130] usb usb6: SerialNumber: xhci-hcd.0.auto
[ 0.573946] hub 6-0:1.0: USB hub found
[ 0.574302] hub 6-0:1.0: 1 port detected
[ 0.575072] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 0.575686] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
[ 0.576496] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[ 0.577366] xhci-hcd xhci-hcd.1.auto: irq 225, io mem 0xfe900000
[ 0.578164] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
[ 0.578889] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.579522] usb usb7: Product: xHCI Host Controller
[ 0.579954] usb usb7: Manufacturer: Linux 5.5.0-MANJARO-ARM+ xhci-hcd
[ 0.580519] usb usb7: SerialNumber: xhci-hcd.1.auto
[ 0.581353] hub 7-0:1.0: USB hub found
[ 0.581710] hub 7-0:1.0: 1 port detected
[ 0.582342] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 0.582940] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
[ 0.583626] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 0.584271] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.585074] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.05
[ 0.585800] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.586433] usb usb8: Product: xHCI Host Controller
[ 0.586865] usb usb8: Manufacturer: Linux 5.5.0-MANJARO-ARM+ xhci-hcd
[ 0.587430] usb usb8: SerialNumber: xhci-hcd.1.auto
[ 0.588242] hub 8-0:1.0: USB hub found
[ 0.588598] hub 8-0:1.0: 1 port detected
[ 0.589346] usbcore: registered new interface driver uas
[ 0.589950] usbcore: registered new interface driver usb-storage
[ 0.590508] usbcore: registered new interface driver ums-alauda
[ 0.591126] usbcore: registered new interface driver ums-cypress
[ 0.591688] usbcore: registered new interface driver ums-datafab
[ 0.592243] usbcore: registered new interface driver ums_eneub6250
[ 0.592813] usbcore: registered new interface driver ums-freecom
[ 0.593375] usbcore: registered new interface driver ums-isd200
[ 0.593924] usbcore: registered new interface driver ums-jumpshot
[ 0.594487] usbcore: registered new interface driver ums-karma
[ 0.595027] usbcore: registered new interface driver ums-onetouch
[ 0.595603] usbcore: registered new interface driver ums-realtek
[ 0.596163] usbcore: registered new interface driver ums-sddr09
[ 0.596713] usbcore: registered new interface driver ums-sddr55
[ 0.597262] usbcore: registered new interface driver ums-usbat
[ 0.597860] usbcore: registered new interface driver usbserial_generic
[ 0.598450] usbserial: USB Serial support registered for generic
[ 0.600912] mousedev: PS/2 mouse device common for all mice
[ 0.603439] rk808 0-001b: chip id: 0x0
[ 0.606672] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 0.607228] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 0.607815] DCDC_REG1: supplied by vcc5v0_sys
[ 0.608916] DCDC_REG2: supplied by vcc5v0_sys
[ 0.609689] DCDC_REG3: supplied by vcc5v0_sys
[ 0.610220] DCDC_REG4: supplied by vcc5v0_sys
[ 0.611061] LDO_REG1: supplied by vcc5v0_sys
[ 0.612502] LDO_REG2: supplied by vcc5v0_sys
[ 0.613035] vcc1v8_hdmi: Bringing 3000000uV into 1800000-1800000uV
[ 0.614324] LDO_REG3: supplied by vcc5v0_sys
[ 0.615653] LDO_REG4: supplied by vcc5v0_sys
[ 0.616187] vcc_sdio: Bringing 3300000uV into 3000000-3000000uV
[ 0.617593] LDO_REG5: supplied by vcc5v0_sys
[ 0.618778] LDO_REG6: supplied by vcc5v0_sys
[ 0.620105] LDO_REG7: supplied by vcc5v0_sys
[ 0.620645] vcc0v9_hdmi: Bringing 1800000uV into 900000-900000uV
[ 0.621961] LDO_REG8: supplied by vcc5v0_sys
[ 0.623314] SWITCH_REG1: supplied by vcc3v3_sys
[ 0.623871] SWITCH_REG2: supplied by vcc3v3_sys
[ 0.627301] rk808-rtc rk808-rtc: registered as rtc0
[ 0.628274] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[ 0.628887] fan53555-reg: supplied by vcc5v0_sys
[ 0.630746] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[ 0.631357] fan53555-reg: supplied by vcc5v0_sys
[ 0.635234] device-mapper: uevent: version 1.0.3
[ 0.635834] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 0.639894] sdhci: Secure Digital Host Controller Interface driver
[ 0.640436] sdhci: Copyright(c) Pierre Ossman
[ 0.641085] Synopsys Designware Multimedia Card Interface Driver
[ 0.642105] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[ 0.642744] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[ 0.643343] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[ 0.643865] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[ 0.644770] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
[ 0.645288] mmc_host mmc0: card is non-removable.
[ 0.646052] random: fast init done
[ 0.658980] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 0.671049] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[ 0.671688] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[ 0.672290] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[ 0.672821] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
[ 0.673741] dwmmc_rockchip fe320000.dwmmc: Got CD GPIO
[ 0.686910] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 0.701026] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.703197] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[ 0.703284] mmc2: CQHCI version 5.10
[ 0.705239] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.707446] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.710930] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[ 0.716582] mmc0: queuing unknown CIS tuple 0x81 (9 bytes)
[ 0.730107] mmc2: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[ 0.732165] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.733310] hid: raw HID events driver (C) Jiri Kosina
[ 0.733956] usbcore: registered new interface driver usbhid
[ 0.734450] usbhid: USB HID core driver
[ 0.740730] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 0.742045] Initializing XFRM netlink socket
[ 0.742866] NET: Registered protocol family 10
[ 0.748346] Segment Routing with IPv6
[ 0.748742] mip6: Mobile IPv6
[ 0.749011] NET: Registered protocol family 17
[ 0.749609] Key type dns_resolver registered
[ 0.750733] registered taskstats version 1
[ 0.751098] Loading compiled-in X.509 certificates
[ 0.751639] zswap: loaded using pool lzo/zbud
[ 0.752129] Key type ._fscrypt registered
[ 0.752484] Key type .fscrypt registered
[ 0.752828] Key type fscrypt-provisioning registered
[ 0.753346] Key type big_key registered
[ 0.755534] Key type encrypted registered
[ 0.775605] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[ 0.778112] rk808-rtc rk808-rtc: setting system clock to 2013-01-18T08:54:33 UTC (1358499273)
[ 0.779347] ALSA device list:
[ 0.779613] No soundcards found.
[ 0.780063] ttyS2 - failed to request DMA
[ 0.780478] md: Waiting for all devices to be available before autodetect
[ 0.781085] md: If you don't use raid, use raid=noautodetect
[ 0.781975] md: Autodetecting RAID arrays.
[ 0.782336] md: autorun ...
[ 0.782582] md: ... autorun DONE.
[ 0.782898] Waiting for root device /dev/mmcblk1p3...
[ 0.791904] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[ 0.792623] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 0.793248] usb 1-1: Product: USB 2.0 Hub
[ 0.794111] hub 1-1:1.0: USB hub found
[ 0.794648] hub 1-1:1.0: 4 ports detected
[ 0.827562] mmc2: Command Queue Engine enabled
[ 0.827977] mmc2: new HS400 Enhanced strobe MMC card at address 0001
[ 0.829172] mmcblk2: mmc2:0001 SLD32G 28.9 GiB
[ 0.829771] mmcblk2boot0: mmc2:0001 SLD32G partition 1 4.00 MiB
[ 0.830489] mmcblk2boot1: mmc2:0001 SLD32G partition 2 4.00 MiB
[ 0.831288] mmcblk2rpmb: mmc2:0001 SLD32G partition 3 4.00 MiB, chardev (238:0)
[ 0.835833] GPT:Primary header thinks Alt. header is not at the end of the disk.
[ 0.836484] GPT:8708252 != 60620799
[ 0.836791] GPT:Alternate GPT header not at the end of the disk.
[ 0.837317] GPT:8708252 != 60620799
[ 0.837625] GPT: Use GNU Parted to correct GPT errors.
[ 0.838117] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
[ 0.922262] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 223
[ 0.931807] mmc0: new ultra high speed SDR104 SDIO card at address 0001
[ 0.960838] usb 7-1: new high-speed USB device number 2 using xhci-hcd
[ 1.005384] usb 7-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.54
[ 1.006114] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.006741] usb 7-1: Product: USB2.1 Hub
[ 1.007089] usb 7-1: Manufacturer: GenesysLogic
[ 1.065065] hub 7-1:1.0: USB hub found
[ 1.065725] hub 7-1:1.0: 4 ports detected
[ 1.151632] usb 8-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ 1.185000] usb 8-1: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice= 6.54
[ 1.185744] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.186380] usb 8-1: Product: USB3.1 Hub
[ 1.186736] usb 8-1: Manufacturer: GenesysLogic
[ 1.209314] hub 8-1:1.0: USB hub found
[ 1.210021] hub 8-1:1.0: 4 ports detected
[ 1.210715] usb 4-1: new full-speed USB device number 2 using ohci-platform
[ 1.210900] usb 1-1.1: new low-speed USB device number 3 using ehci-platform
[ 1.400901] usb 7-1.3: new low-speed USB device number 3 using xhci-hcd
[ 1.468993] usb 1-1.1: New USB device found, idVendor=413c, idProduct=2113, bcdDevice= 1.08
[ 1.469742] usb 1-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1.470389] usb 1-1.1: Product: Dell KB216 Wired Keyboard
[ 1.475747] usb 4-1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice= 1.34
[ 1.476565] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.478371] input: Dell KB216 Wired Keyboard as /devices/platform/fe380000.usb/usb1/1-1/1-1.1/1-1.1:1.0/0003:413C:2113.0001/input/input0
[ 1.542843] hid-generic 0003:413C:2113.0001: input,hidraw0: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-fe380000.usb-1.1/input0
[ 1.550574] input: Dell KB216 Wired Keyboard System Control as /devices/platform/fe380000.usb/usb1/1-1/1-1.1/1-1.1:1.1/0003:413C:2113.0002/input/input1
[ 1.555736] usb 7-1.3: New USB device found, idVendor=03f0, idProduct=0941, bcdDevice= 1.00
[ 1.556494] usb 7-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.557144] usb 7-1.3: Product: HP X500 USB Optical Mouse
[ 1.557628] usb 7-1.3: Manufacturer: PixArt
[ 1.613374] input: PixArt HP X500 USB Optical Mouse as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.1.auto/usb7/7-1/7-1.3/7-1.3:1.0/0003:03F0:0941.00033
[ 1.622065] input: Dell KB216 Wired Keyboard Consumer Control as /devices/platform/fe380000.usb/usb1/1-1/1-1.1/1-1.1:1.1/0003:413C:2113.0002/input/input2
[ 1.623308] hid-generic 0003:03F0:0941.0003: input,hidraw1: USB HID v1.11 Mouse [PixArt HP X500 USB Optical Mouse] on usb-xhci-hcd.1.auto-1.3/input0
[ 1.624641] hid-generic 0003:413C:2113.0002: input,hidraw2: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-fe380000.usb-1.1/input1
[ 1.741027] usb 7-1.4: new high-speed USB device number 4 using xhci-hcd
[ 1.771688] usb 7-1.4: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00
[ 1.772446] usb 7-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.773097] usb 7-1.4: Product: 802.11n NIC
[ 1.773476] usb 7-1.4: Manufacturer: Realtek
[ 1.773861] usb 7-1.4: SerialNumber: 00E04C0001
[ 1.820856] usb 1-1.2: new full-speed USB device number 4 using ehci-platform
[ 2.075586] usb 1-1.2: New USB device found, idVendor=0d8c, idProduct=0014, bcdDevice= 1.00
[ 2.076335] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.076984] usb 1-1.2: Product: USB Audio Device
[ 2.077398] usb 1-1.2: Manufacturer: C-Media Electronics Inc.
[ 2.081956] input: C-Media Electronics Inc. USB Audio Device as /devices/platform/fe380000.usb/usb1/1-1/1-1.2/1-1.2:1.3/0003:0D8C:0014.0004/input/input4
[ 2.152447] hid-generic 0003:0D8C:0014.0004: input,hidraw3: USB HID v1.00 Device [C-Media Electronics Inc. USB Audio Device] on usb-fe380000.usb-1.2/input3
[ 7.580926] phy phy-ff770000.syscon:usb2-phy@e450.2: charger = USB_DCP_CHARGER
[ 82.120874] random: crng init done