Rock64 v3 and SD-Cards

[dene]

Issue has been identified and solved. New images from mrfixit2001 and ayufan will have the fix.

I have upload the mrfixit200 debian image that works with Rock64 v3 to file server and here is the download link: http://files.pine64.org/os/ROCK64/v3/roc...9_2.img.xz

My bootlog with this image, after the loading kernel message it sits flashing the power LED twice per second and no more output or network activity.

Have tried a few different SD cards from 16GB to 64GB, all Class 10/UHS1.

Code:

DDR version 1.13 20180428 ID:0x805 N In LPDDR3 786MHz Bus Width=32 Col=11 Bank=8 Row=15/15 CS=2 Die Bus-Width=32 Size=4096MB ddrconfig:7 OUT Boot1 Release Time: Feb  2 2018 15:41:39, version: 2.46 ChipType = 0x11, 143 SdmmcInit=2 0 BootCapSize=0 UserCapSize=0MB FwPartOffset=2000 , 0 SdmmcInit=0 0 BootCapSize=0 UserCapSize=60952MB FwPartOffset=2000 , 0 StorageInit ok = 24000 Raw SecureMode = 0 SecureInit read PBA: 0x4 SecureInit read PBA: 0x404 SecureInit read PBA: 0x804 SecureInit read PBA: 0xc04 SecureInit read PBA: 0x1004 SecureInit ret = 0, SecureMode = 0 LoadTrustBL No find bl30.bin No find bl32.bin Load uboot, ReadLba = 2000 Load OK, addr=0x200000, size=0xa3d00 RunBL31 0x10000 NOTICE:  BL31: v1.3(debug):9d3f591 NOTICE:  BL31: Built : 14:39:02, Jan 17 2018 NOTICE:  BL31:Rockchip release version: v1.3 INFO:    ARM GICv2 driver initialized INFO:    Using opteed sec cpu_context! INFO:    boot cpu mask: 1 INFO:    plat_rockchip_pmu_init: pd status 0xe INFO:    BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR:   Error initializing runtime service opteed_fast INFO:    BL31: Preparing for EL3 exit to normal world INFO:    Entry point address = 0x200000 INFO:    SPSR = 0x3c9 U-Boot 2017.09 (May 09 2019 - 11:48:17 -0400) Model: Rockchip RK3328 EVB DRAM:  4 GiB Sysmem: init Relocation Offset is: fed15000 I2c speed: 400000Hz PMIC:  RK8050 (on=0x02, off=0x01) vdd_logic 1100000 uV vdd_arm 1100000 uV MMC:   rksdmmc@ff500000: 1, rksdmmc@ff520000: 0 *** Warning - bad CRC, using default environment In:    serial@ff130000 Out:   serial@ff130000 Err:   serial@ff130000 Model: Rockchip RK3328 EVB switch to partitions #0, OK mmc1 is current device Unknown command 'rkimgtest' - try 'help' Card did not respond to voltage select! mmc_init: -95, time 9 Unknown command 'rknand' - try 'help' Unknown command 'rksfc' - try 'help' Unknown command 'rksfc' - try 'help' Bootdev: mmc 0 CLK: (sync kernel. arm: enter 600000 KHz, init 600000 KHz, kernel 0N/A)   apll 400000 KHz   dpll 1572000 KHz   cpll 1200000 KHz   gpll 491009 KHz   npll 600000 KHz   armclk 600000 KHz   aclk_bus 150000 KHz   hclk_bus 75000 KHz   pclk_bus 75000 KHz   aclk_peri 150000 KHz   hclk_peri 75000 KHz   pclk_peri 75000 KHz Net: Warning: ethernet@ff540000 (eth0) using random MAC address - e2:b5:61:c5:27:cc eth0: ethernet@ff540000 Hit key to stop autoboot('CTRL+C'):  0 Unknown command 'boot_android' - try 'help' Unknown command 'bootrkp' - try 'help' switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf reading /extlinux/extlinux.conf 351 bytes read in 4 ms (85 KiB/s) 1: ROCK64 Retrieving file: /Image reading /Image 22226952 bytes read in 1006 ms (21.1 MiB/s) append: console=tty1 rw root=PARTUUID=deedbeef-02 rootwait rootfstype=ext4 panic=10 init=/sbin/init coherent_pool=1M ethaddr= eth1addr= serial=c3d9b8674f4b94f6 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 video=HDMI-A-1:1920x1080@60 loglevel=3 Retrieving file: /rk3328-rock64.dtb reading /rk3328-rock64.dtb 72924 bytes read in 8 ms (8.7 MiB/s) ## Flattened Device Tree blob at 08300000    Booting using the fdt blob at 0x8300000    Loading Device Tree to 00000000f6eed000, end 00000000f6f01cdb ... OK Adding bank: 0x00200000 - 0xff000000 (size: 0xfee00000) Total: 4576.971 ms Starting kernel ... DDR version 1.13 20180428 ID:0x805 N In LPDDR3 786MHz Bus Width=32 Col=11 Bank=8 Row=15/15 CS=2 Die Bus-Width=32 Size=4096MB ddrconfig:7 OUT Boot1 Release Time: Feb  2 2018 15:41:39, version: 2.46 ChipType = 0x11, 144 SdmmcInit=2 0 BootCapSize=0 UserCapSize=0MB FwPartOffset=2000 , 0 SdmmcInit=0 0 BootCapSize=0 UserCapSize=60952MB FwPartOffset=2000 , 0 StorageInit ok = 23989 Raw SecureMode = 0 SecureInit read PBA: 0x4 SecureInit read PBA: 0x404 SecureInit read PBA: 0x804 SecureInit read PBA: 0xc04 SecureInit read PBA: 0x1004 SecureInit ret = 0, SecureMode = 0 LoadTrustBL No find bl30.bin No find bl32.bin Load uboot, ReadLba = 2000 Load OK, addr=0x200000, size=0xa3d00 RunBL31 0x10000 NOTICE:  BL31: v1.3(debug):9d3f591 NOTICE:  BL31: Built : 14:39:02, Jan 17 2018 NOTICE:  BL31:Rockchip release version: v1.3 INFO:    ARM GICv2 driver initialized INFO:    Using opteed sec cpu_context! INFO:    boot cpu mask: 1 INFO:    plat_rockchip_pmu_init: pd status 0xe INFO:    BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR:   Error initializing runtime service opteed_fast INFO:    BL31: Preparing for EL3 exit to normal world INFO:    Entry point address = 0x200000 INFO:    SPSR = 0x3c9 U-Boot 2017.09 (May 09 2019 - 11:48:17 -0400) Model: Rockchip RK3328 EVB DRAM:  4 GiB Sysmem: init Relocation Offset is: fed15000 I2c speed: 400000Hz PMIC:  RK8050 (on=0x02, off=0x01) vdd_logic 1100000 uV vdd_arm 1100000 uV MMC:   rksdmmc@ff500000: 1, rksdmmc@ff520000: 0 *** Warning - bad CRC, using default environment In:    serial@ff130000 Out:   serial@ff130000 Err:   serial@ff130000 Model: Rockchip RK3328 EVB switch to partitions #0, OK mmc1 is current device Unknown command 'rkimgtest' - try 'help' Card did not respond to voltage select! mmc_init: -95, time 9 Unknown command 'rknand' - try 'help' Unknown command 'rksfc' - try 'help' Unknown command 'rksfc' - try 'help' Bootdev: mmc 0 CLK: (sync kernel. arm: enter 600000 KHz, init 600000 KHz, kernel 0N/A)   apll 400000 KHz   dpll 1572000 KHz   cpll 1200000 KHz   gpll 491009 KHz   npll 600000 KHz   armclk 600000 KHz   aclk_bus 150000 KHz   hclk_bus 75000 KHz   pclk_bus 75000 KHz   aclk_peri 150000 KHz   hclk_peri 75000 KHz   pclk_peri 75000 KHz Net: Warning: ethernet@ff540000 (eth0) using random MAC address - e2:b5:61:c5:27:cc eth0: ethernet@ff540000 Hit key to stop autoboot('CTRL+C'):  0 Unknown command 'boot_android' - try 'help' Unknown command 'bootrkp' - try 'help' switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf reading /extlinux/extlinux.conf 345 bytes read in 4 ms (84 KiB/s) 1: ROCK64 Retrieving file: /Image reading /Image 22226952 bytes read in 1007 ms (21 MiB/s) append: console=tty1 rw root=/dev/mmcblk1p2 rootwait rootfstype=ext4 panic=10 init=/sbin/init coherent_pool=1M ethaddr= eth1addr= serial=c3d9b8674f4b94f6 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 video=HDMI-A-1:1920x1080@60 loglevel=3 Retrieving file: /rk3328-rock64.dtb reading /rk3328-rock64.dtb 72924 bytes read in 8 ms (8.7 MiB/s) ## Flattened Device Tree blob at 08300000    Booting using the fdt blob at 0x8300000    Loading Device Tree to 00000000f6eed000, end 00000000f6f01cdb ... OK Adding bank: 0x00200000 - 0xff000000 (size: 0xfee00000) Total: 4577.812 ms Starting kernel ...