Tutorial[ Seagate Disks ]: Install Seagate OpenSeaChest Utilities

[Neo2018]

I saw here

Hello
At the time I tried a lot and probably put hdparm on default values or off.
Usually I always have it on 217.

The disk is presented like normal to the OS, don't know why is hasn't worked
your /dev/sdb should have spits something out with or something else..

Code:

openSeaChest_Basics -d  /dev/sdb -i -v 4

the self >

Code:

:~# openSeaChest_Basics -d  /dev/sdb -i -v 4
==========================================================================================
openSeaChest_Basics - openSeaChest drive utilities - NVMe Enabled
Copyright (c) 2014-2018 Seagate Technology LLC and/or its Affiliates, All Rights Reserved
openSeaChest_Basics Version: 2.8.0-1_19_0 ARM
Build Date: Feb 28 2019
Today: Tue Mar  5 03:57:54 2019
==========================================================================================
open: Bad address
open failure
Error: 14 - Bad address
Error: Could not open handle to /dev/sdb

To check the pcie controller:

Code:

dmesg|grep -Ei "ahci|pcie" --color

what is the output?

No result, no output.