+- PINE64 (https://forum.pine64.org)
+-- Forum: ROCKPRO64 (https://forum.pine64.org/forumdisplay.php?fid=98)
+--- Forum: RockPro64 Projects, Ideas and Tutorials (https://forum.pine64.org/forumdisplay.php?fid=104)
+--- Thread: Tutorial[ Seagate Disks ]: Install Seagate OpenSeaChest Utilities (/showthread.php?tid=7137)
Tutorial[ Seagate Disks ]: Install Seagate OpenSeaChest Utilities - tuxd3v - 02-06-2019
Hello All,
I saw that some users have Seagate IronWolfs disks paired with RockPro64..
There are some features that, are nice to configure on Seagate Disks..
Seagate has tools for disks..
Tools that are Present in the OpenSeaChest Utilities:
- openSeaChest_Basics
- openSeaChest_Configure
- openSeaChest_Erase
- openSeaChest_Firmware
- openSeaChest_Format
- openSeaChest_GenericTests
- openSeaChest_Info
- openSeaChest_Logs
- openSeaChest_NVMe
- openSeaChest_PowerControl
- openSeaChest_SMART
The Repository is here: OpenSeaChest Utilities
You will need to compile OpenSeaChest Utilities, as root:
1) Jump to /root
Code:
cd /root2) Use last Stable Release( v19.01.31 - Released 6 days ago, by xahmad )
Code:
git clone --recursive --branch v19.01.31 https://github.com/Seagate/openSeaChest.git3) Jump into OpenSeaChest gcc compilation method and Compile the project:
OBS: I tried using parallel compilation and it failed, better to use 1 process only like bellow..
Code:
cd openSeaChest/Make/gcc && make release4) Wait for compilation to Finish, and check if there are erros at the end.
If there are no errors, then copy binaries to final destination and remove code stuff used to compile:
Code:
mkdir -pv /opt/openSeaChest/bin && mv openseachest_exes/* /opt/openSeaChest/bin
cd / && rm -rf /root/openSeaChest5) Update your root PATH environment var to know about OpenSeachest Utilities:
Code:
cat <<<'export PATH="${PATH}:/opt/openSeaChest/bin"' >> /root/.bashrc6) Exit from root and log again has root,
Code:
exit && sudo su -7) Now try to see if root, knows about OpenSeachest Utilities:
type "open" and press <TAB>, you will see at least :
Code:
openSeaChest_FormatUnit openSeaChest_PowerControl
openSeaChest_Basics openSeaChest_GenericTests openSeaChest_SMART
openSeaChest_Configure openSeaChest_Info openSeaChest_ZBD
openSeaChest_Erase openSeaChest_Logs
openSeaChest_Firmware openSeaChest_NVMe 8) Now has a Candy, check information about your Disk, using openSeaChest_Basics:
Code:
# openSeaChest_Basics --deviceInfo --device /dev/sdX
==========================================================================================
openSeaChest_Basics - openSeaChest drive utilities - NVMe Enabled
Copyright (c) 2014-2018 Seagate Technology LLC and/or its Affiliates, All Rights Reserved
openSeaChest_Basics Version: 2.8.0-1_19_0 ARM
Build Date: Feb 3 2019
Today: Wed Feb 6 12:56:52 2019
==========================================================================================
/dev/sg0 - ST4000VN008-XXXXXX - XXXXXXXX - ATA
Model Number: ST4000VN008-XXXXXX
Serial Number: XXXXXXXX
Firmware Revision: SC60
World Wide Name: XXXXXXXXXXXXXXXX
Drive Capacity (TB/TiB): 4.00/3.64
Native Drive Capacity (TB/TiB): 4.00/3.64
Temperature Data:
Current Temperature (C): 16
Highest Temperature (C): 27
Lowest Temperature (C): 13
Power On Time: 4 days 6 hours 59 minutes
Power On Hours: 102.98
MaxLBA: 7814037167
Native MaxLBA: 7814037167
Logical Sector Size (B): 512
Physical Sector Size (B): 4096
Sector Alignment: 0
Rotation Rate (RPM): 5980
Form Factor (inch): 3.5
Last DST information:
DST has never been run
Long Drive Self Test Time: 10 hours 13 minutes
Interface speed:
Max Speed (Gb/s): 6.0
Negotiated Speed (Gb/s): 6.0
Annualized Workload Rate (TB/yr): 341.03
Total Bytes Read (TB): 4.01
Total Bytes Written (MB): 24.24
Encryption Support: Not Supported
Cache Size (MiB): 64.00
Read Look-Ahead: Enabled
Write Cache: Enabled
Low Current Spinup: Enabled
SMART Status: Good
ATA Security Information: Supported
Firmware Download Support: Full, Segmented, Deferred, DMA
Specifications Supported:
ACS-3
ACS-2
ATA8-ACS
ATA/ATAPI-7
ATA/ATAPI-6
ATA/ATAPI-5
ATA/ATAPI-4
SATA 3.1
SATA 3.0
SATA 2.6
SATA 2.5
SATA II: Extensions
SATA 1.0a
ATA8-AST
Features Supported:
Sanitize
SATA NCQ
SATA Rebuild Assist
SATA Software Settings Preservation [Enabled]
SATA Device Initiated Power Management
HPA
Power Management
Security
SMART [Enabled]
DCO
48bit Address
PUIS [Enabled]
APM [Enabled]
GPL
Streaming
SMART Self-Test
SMART Error Logging
Write-Read-Verify
Sense Data Reporting [Enabled]
SCT Write Same
SCT Error Recovery Control
SCT Feature Control
SCT Data Tables
Host Logging
Seagate In Drive Diagnostics (IDD)OBS: Read Carefully the Documentation about OpenSeachest Utilities, to not damage your data, or your disk..
Start by openSeaChest_Basics tool, which seems less prone, to problems.. in the time you are aquiring the needed skills..
Hope you Enjoy..
![[Image: thumbsup.png]](https://forum.pine64.org/images/icons/thumbsup.png){kind=icon}
Regards
RE: Tutorial[ Seagate Disks ]: Install Seagate OpenSeaChest Utilities - tllim - 02-06-2019
Appreciate and thanks on the tutorial.
RE: Tutorial[ Seagate Disks ]: Install Seagate OpenSeaChest Utilities - tuxd3v - 02-07-2019
(02-06-2019, 07:53 PM)tllim Wrote: Appreciate and thanks on the tutorial.
Hello tllim,
You welcome
RE: Tutorial[ Seagate Disks ]: Install Seagate OpenSeaChest Utilities - Neo2018 - 02-28-2019
(02-06-2019, 07:05 AM)tuxd3v Wrote: 8) Now has a Candy, check information about your Disk, using openSeaChest_Basics:Hello tuxd3v, I need your help again please
I have decided to install OpenSeachest.
So far my actions are:
Code:
cd /root
git clone --recursive --branch v19.01.31 https://github.com/Seagate/openSeaChest.git
cd openSeaChest/Make/gcc && make releaseCode:
../../utils/C/openSeaChest/openSeaChest_NVMe.c:74:5: note: in expansion of macro 'PARTIAL_DATA_ERASE_VAR'
PARTIAL_DATA_ERASE_VAR
^~~~~~~~~~~~~~~~~~~~~~
../../utils/C/openSeaChest/openSeaChest_NVMe.c:1134:34: warning: 'fullSize' may be used uninitialized in this function [-Wmaybe-uninitialized]
while(offset < fullSize)
^
cc ../../utils/C/openSeaChest/openSeaChest_NVMe.o ../../src/EULA.o ../../src/openseachest_util_options.o -Wall ../../opensea-operations/Make/gcc/lib/libopensea-operations.a ../../opensea-transport/Make/gcc/lib/libopensea-transport.a ../../opensea-common/Make/gcc/lib/libopensea-common.a -lm -lrt -o openseachest_exes/openSeaChest_NVMe
cc -Wall -c -std=gnu99 -O3 -I../../opensea-common/include -I../../opensea-transport/include -I../../include -I../../opensea-operations/include -DDISABLE_TCG_SUPPORT ../../utils/C/openSeaChest/openSeaChest_Logs.c -o ../../utils/C/openSeaChest/openSeaChest_Logs.o
cc ../../utils/C/openSeaChest/openSeaChest_Logs.o ../../src/EULA.o ../../src/openseachest_util_options.o -Wall ../../opensea-operations/Make/gcc/lib/libopensea-operations.a ../../opensea-transport/Make/gcc/lib/libopensea-transport.a ../../opensea-common/Make/gcc/lib/libopensea-common.a -lm -lrt -o openseachest_exes/openSeaChest_Logs(02-06-2019, 07:05 AM)tuxd3v Wrote: 7) Now try to see if root, knows about OpenSeachest Utilities:Try with the command >
type "open" and press <TAB>, you will see at least :
Code:openSeaChest_FormatUnit openSeaChest_PowerControl
openSeaChest_Basics openSeaChest_GenericTests openSeaChest_SMART
openSeaChest_Configure openSeaChest_Info openSeaChest_ZBD
openSeaChest_Erase openSeaChest_Logs
openSeaChest_Firmware openSeaChest_NVMe
Code:
cd /root/openSeaChest/Make/gcc/openseachest_exes
ls
openSeaChest_Basics openSeaChest_Firmware openSeaChest_Info openSeaChest_PowerControl
openSeaChest_Configure openSeaChest_FormatUnit openSeaChest_Logs openSeaChest_SMART
openSeaChest_Erase openSeaChest_GenericTests openSeaChest_NVMe openSeaChest_ZBD
type "open" and press <TAB>Code:
openSeaChest_Basics
-bash: openSeaChest_Basics: command not found
openSeaChest_Info
-bash: openSeaChest_Info: command not foundMany Thanks!
RE: Tutorial[ Seagate Disks ]: Install Seagate OpenSeaChest Utilities - tuxd3v - 03-01-2019
(02-28-2019, 02:02 PM)Neo2018 Wrote: I have decided to install OpenSeachest.
So far my actions are:
Before I put it to copying and the binaries to the final destination, I first wanted to test it.
(02-06-2019, 07:05 AM)tuxd3v Wrote: 7) Now try to see if root, knows about OpenSeachest Utilities:Try with the command >
type "open" and press <TAB>, you will see at least :
Code:openSeaChest_FormatUnit openSeaChest_PowerControl
openSeaChest_Basics openSeaChest_GenericTests openSeaChest_SMART
openSeaChest_Configure openSeaChest_Info openSeaChest_ZBD
openSeaChest_Erase openSeaChest_Logs
openSeaChest_Firmware openSeaChest_NVMe
No functionCode:cd /root/openSeaChest/Make/gcc/openseachest_exes
ls
openSeaChest_Basics openSeaChest_Firmware openSeaChest_Info openSeaChest_PowerControl
openSeaChest_Configure openSeaChest_FormatUnit openSeaChest_Logs openSeaChest_SMART
openSeaChest_Erase openSeaChest_GenericTests openSeaChest_NVMe openSeaChest_ZBD
type "open" and press <TAB>
What's wrong, how do I test the functions?Code:openSeaChest_Basics
-bash: openSeaChest_Basics: command not found
openSeaChest_Info
-bash: openSeaChest_Info: command not found
Many Thanks!
Hello Neo2018,
No problem
![[Image: wink.png]](https://forum.pine64.org/images/icons/wink.png){kind=icon}
Because you don't have binaries in final destination and maybe not in the PATH Environment Variable yet, you cannot execute them as if the system knows were they are..
You need to execute, or with absolute paths, or relative to the folder they are:
A example of openSeaChest_Basics options '-h' switch, to see possibilities of the tool:
1) Absolute paths:
Code:
/root/openSeaChest/Make/gcc/openseachest_exes/openSeaChest_Basics -h2) Relative paths:
Code:
cd /root/openSeaChest/Make/gcc/openseachest_exes
./openSeaChest_Basics -hIn your case, that you want to see information about the disks( X is your drive letter, a,b,c,d and so on.. ):
1) Absolute paths:
Code:
/root/openSeaChest/Make/gcc/openseachest_exes/openSeaChest_Basics --deviceInfo --device /dev/sdX2) Relative paths:
Code:
cd /root/openSeaChest/Make/gcc/openseachest_exes
./openSeaChest_Basics --deviceInfo --device /dev/sdXIn this way, you can use all tools, but its boring since you can follow steps 4,5,6.. and after that you can purely issue the command you want too
Drop me a line, how it were going
RE: Tutorial[ Seagate Disks ]: Install Seagate OpenSeaChest Utilities - Neo2018 - 03-01-2019
(03-01-2019, 10:40 AM)tuxd3v Wrote: In your case, that you want to see information about the disks( X is your drive letter, a,b,c,d and so on.. ):Hey, thanks for your answer
1) Absolute paths:
2) Relative paths:Code:/root/openSeaChest/Make/gcc/openseachest_exes/openSeaChest_Basics --deviceInfo --device /dev/sdX
Code:cd /root/openSeaChest/Make/gcc/openseachest_exes
./openSeaChest_Basics --deviceInfo --device /dev/sdX
I was too stupid last night, did not even come up with the idea to do it with ./openSeaChest_Basics. Sorry
but unfortunately that does not work properly> /root/openSeaChest/Make/gcc/openseachest_exes/openSeaChest_Basics --deviceInfo --device /dev/sdb > output >
Code:
/root/openSeaChest/Make/gcc/openseachest_exes/openSeaChest_Basics --deviceInfo --device /dev/sdb
==========================================================================================
openSeaChest_Basics - openSeaChest drive utilities - NVMe Enabled
Copyright (c) 2014-2018 Seagate Technology LLC and/or its Affiliates, All Rights Reserved
openSeaChest_Basics Version: 2.8.0-1_19_0 ARM
Build Date: Feb 28 2019
Today: Fri Mar 1 18:18:46 2019
==========================================================================================
open: Bad address
open failure
Error: 14 - Bad address
Error: Could not open handle to /dev/sdbCode:
:~# df -h
Filesystem Size Used Avail Use% Mounted on
udev 1.9G 0 1.9G 0% /dev
tmpfs 388M 40M 348M 11% /run
/dev/mmcblk1p7 57G 8.8G 46G 17% /
tmpfs 1.9G 8.0K 1.9G 1% /dev/shm
tmpfs 5.0M 8.0K 5.0M 1% /run/lock
tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
tmpfs 1.9G 36K 1.9G 1% /tmp
/dev/mmcblk1p6 112M 10K 112M 1% /boot/efi
/dev/sda1 458G 266G 193G 58% /srv/dev-disk-by-label-Daten2
/dev/sdb1 3.6T 2.3T 1.4T 64% /srv/dev-disk-by-label-Daten
folder2ram 1.9G 499M 1.5G 26% /var/log
folder2ram 1.9G 0 1.9G 0% /var/tmp
folder2ram 1.9G 724K 1.9G 1% /var/lib/openmediavault/rrd
folder2ram 1.9G 1.6M 1.9G 1% /var/spool
folder2ram 1.9G 16M 1.9G 1% /var/lib/rrdcached
folder2ram 1.9G 12K 1.9G 1% /var/lib/monit
folder2ram 1.9G 4.0K 1.9G 1% /var/lib/php
folder2ram 1.9G 4.0K 1.9G 1% /var/lib/netatalk/CNID
folder2ram 1.9G 524K 1.9G 1% /var/cache/samba
overlay 57G 8.8G 46G 17% /var/lib/docker/overlay2/915c4ad2cc7d3cde1e6bede0bf6fccd152a371fe96a1dc7b3c388486136dc2db/merged
overlay 57G 8.8G 46G 17% /var/lib/docker/overlay2/926760e4cc0d73f08bc8d1c9acffad1b88c77f116812f790d4e29403509b9ca4/merged
overlay 57G 8.8G 46G 17% /var/lib/docker/overlay2/f5093a63511d249a8c80d8752f60ddc4fb166944dac056b354adf853053d8c5d/merged
shm 64M 0 64M 0% /var/lib/docker/containers/db1a35c9e6185adf6e04a220da21a23d1ecaf5dabb19e9600938c4fcfcef0490/mounts/shm
shm 64M 0 64M 0% /var/lib/docker/containers/e41de1c0c35a1dccf993ee58f88e610f910506bbc7526aa6b6a285b99a74bc0e/mounts/shm
shm 64M 0 64M 0% /var/lib/docker/containers/04dc60abbb2bab37469103288fb74ba2e0d119ec9a74bc31e0771221c9c853f9/mounts/shm
overlay 57G 8.8G 46G 17% /var/lib/docker/overlay2/82205090b3380be4d858d032a57cd65e99143ad7f6c56ea72710d77dddcc6283/merged
shm 64M 0 64M 0% /var/lib/docker/containers/99caab121e27b07f61b49427783d880f3f8f9349f9b98807dec560a5f427c699/mounts/shm
tmpfs 388M 0 388M 0% /run/user/0I try that with >
Quote:In this way, you can use all tools, but its boring since you can follow steps 4,5,6.. and after that you can purely issue the command you want too
(03-01-2019, 10:40 AM)tuxd3v Wrote: In this way, you can use all tools, but its boring since you can follow steps 4,5,6.. and after that you can purely issue the command you want tooIt does not work...
Quote:7) Now try to see if root, knows about OpenSeachest Utilities:No Answer....
type "open" and press <TAB>, you will see at least :
Quote:4) Wait for compilation to Finish, and check if there are erros at the end.The folder has now been deleted > cd / && rm -rf /root/openSeaChest ......... I now need everything from new download and > cd openSeaChest/Make/gcc && make release > re-execute?
If there are no errors, then copy binaries to final destination and remove code stuff used to compile:
Code:mkdir -pv /opt/openSeaChest/bin && mv openseachest_exes/* /opt/openSeaChest/bin
cd / && rm -rf /root/openSeaChest
Code:
:/opt/openSeaChest/bin# ls -la
total 8640
drwxr-xr-x 2 root root 4096 Mar 1 19:25 .
drwxr-xr-x 3 root root 4096 Mar 1 19:25 ..
-rwxr-xr-x 1 root root 747660 Feb 28 19:53 openSeaChest_Basics
-rwxr-xr-x 1 root root 733056 Feb 28 19:53 openSeaChest_Configure
-rwxr-xr-x 1 root root 737828 Feb 28 19:53 openSeaChest_Erase
-rwxr-xr-x 1 root root 636864 Feb 28 19:56 openSeaChest_Firmware
-rwxr-xr-x 1 root root 729564 Feb 28 19:56 openSeaChest_FormatUnit
-rwxr-xr-x 1 root root 752088 Feb 28 19:53 openSeaChest_GenericTests
-rwxr-xr-x 1 root root 824812 Feb 28 19:56 openSeaChest_Info
-rwxr-xr-x 1 root root 700332 Feb 28 19:56 openSeaChest_Logs
-rwxr-xr-x 1 root root 739004 Feb 28 19:56 openSeaChest_NVMe
-rwxr-xr-x 1 root root 743072 Feb 28 19:53 openSeaChest_PowerControl
-rwxr-xr-x 1 root root 741984 Feb 28 19:53 openSeaChest_SMART
-rwxr-xr-x 1 root root 725144 Feb 28 19:56 openSeaChest_ZBDRE: Tutorial[ Seagate Disks ]: Install Seagate OpenSeaChest Utilities - tuxd3v - 03-01-2019
(03-01-2019, 11:48 AM)Neo2018 Wrote: The folder has now been deleted > cd / && rm -rf /root/openSeaChest ......... I now need everything from new download and > cd openSeaChest/Make/gcc && make release > re-execute?
Code::/opt/openSeaChest/bin# ls -la
total 8640
drwxr-xr-x 2 root root 4096 Mar 1 19:25 .
drwxr-xr-x 3 root root 4096 Mar 1 19:25 ..
-rwxr-xr-x 1 root root 747660 Feb 28 19:53 openSeaChest_Basics
-rwxr-xr-x 1 root root 733056 Feb 28 19:53 openSeaChest_Configure
-rwxr-xr-x 1 root root 737828 Feb 28 19:53 openSeaChest_Erase
-rwxr-xr-x 1 root root 636864 Feb 28 19:56 openSeaChest_Firmware
-rwxr-xr-x 1 root root 729564 Feb 28 19:56 openSeaChest_FormatUnit
-rwxr-xr-x 1 root root 752088 Feb 28 19:53 openSeaChest_GenericTests
-rwxr-xr-x 1 root root 824812 Feb 28 19:56 openSeaChest_Info
-rwxr-xr-x 1 root root 700332 Feb 28 19:56 openSeaChest_Logs
-rwxr-xr-x 1 root root 739004 Feb 28 19:56 openSeaChest_NVMe
-rwxr-xr-x 1 root root 743072 Feb 28 19:53 openSeaChest_PowerControl
-rwxr-xr-x 1 root root 741984 Feb 28 19:53 openSeaChest_SMART
-rwxr-xr-x 1 root root 725144 Feb 28 19:56 openSeaChest_ZBD
No, You now have the binaries in final destination..
you need this:
Code:
# grep openSeaChes /root/.bashrc --color
export PATH="${PATH}:/opt/openSeaChest/bin"or you can also do it for your session with:
Code:
export PATH="${PATH}:/opt/openSeaChest/bin"In the error you report..."wrong channel", that its strange, could be anny special char in the between..
when you do
Code:
lsblkWhat appears in your NAS box?
RE: Tutorial[ Seagate Disks ]: Install Seagate OpenSeaChest Utilities - Neo2018 - 03-02-2019
(03-01-2019, 04:56 PM)tuxd3v Wrote: or you can also do it for your session with:Ok that works now.
Then type 'open' + <TAB>Code:export PATH="${PATH}:/opt/openSeaChest/bin"
Code:
:~# open
openSeaChest_Basics openSeaChest_FormatUnit openSeaChest_NVMe openssl
openSeaChest_Configure openSeaChest_GenericTests openSeaChest_PowerControl openvpn
openSeaChest_Erase openSeaChest_Info openSeaChest_SMART
openSeaChest_Firmware openSeaChest_Logs openSeaChest_ZBDCode:
:~# openSeaChest_Basics --deviceInfo --device /dev/sdb
==========================================================================================
openSeaChest_Basics - openSeaChest drive utilities - NVMe Enabled
Copyright (c) 2014-2018 Seagate Technology LLC and/or its Affiliates, All Rights Reserved
openSeaChest_Basics Version: 2.8.0-1_19_0 ARM
Build Date: Feb 28 2019
Today: Sat Mar 2 11:38:54 2019
==========================================================================================
open: Bad address
open failure
Error: 14 - Bad address
Error: Could not open handle to /dev/sdbQuote:In the error you report..."wrong channel", that its strange, could be anny special char in the between..
when you do
Code:
What appears in your NAS box?Code:lsblk
Code:
:~# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 465.8G 0 disk
`-sda1 8:1 0 465.8G 0 part /srv/dev-disk-by-label-Daten2
sdb 8:16 0 3.7T 0 disk
`-sdb1 8:17 0 3.7T 0 part /srv/dev-disk-by-label-Daten
mtdblock0 31:0 0 4M 0 disk
mtdblock1 31:1 0 32K 0 disk
mtdblock2 31:2 0 256K 0 disk
mmcblk1 179:0 0 57.6G 0 disk
|-mmcblk1p1 179:1 0 3.9M 0 part
|-mmcblk1p2 179:2 0 64K 0 part
|-mmcblk1p3 179:3 0 4M 0 part
|-mmcblk1p4 179:4 0 4M 0 part
|-mmcblk1p5 179:5 0 4M 0 part
|-mmcblk1p6 179:6 0 112M 0 part /boot/efi
`-mmcblk1p7 179:7 0 57.5G 0 part /
mmcblk1boot0 179:32 0 4M 1 disk
mmcblk1boot1 179:64 0 4M 1 disk
mmcblk1rpmb 179:96 0 4M 0 diskRE: Tutorial[ Seagate Disks ]: Install Seagate OpenSeaChest Utilities - tuxd3v - 03-02-2019
(03-02-2019, 04:54 AM)Neo2018 Wrote:Where is the mistake?Code::~# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 465.8G 0 disk
`-sda1 8:1 0 465.8G 0 part /srv/dev-disk-by-label-Daten2
sdb 8:16 0 3.7T 0 disk
`-sdb1 8:17 0 3.7T 0 part /srv/dev-disk-by-label-Daten
mtdblock0 31:0 0 4M 0 disk
mtdblock1 31:1 0 32K 0 disk
mtdblock2 31:2 0 256K 0 disk
mmcblk1 179:0 0 57.6G 0 disk
|-mmcblk1p1 179:1 0 3.9M 0 part
|-mmcblk1p2 179:2 0 64K 0 part
|-mmcblk1p3 179:3 0 4M 0 part
|-mmcblk1p4 179:4 0 4M 0 part
|-mmcblk1p5 179:5 0 4M 0 part
|-mmcblk1p6 179:6 0 112M 0 part /boot/efi
`-mmcblk1p7 179:7 0 57.5G 0 part /
mmcblk1boot0 179:32 0 4M 1 disk
mmcblk1boot1 179:64 0 4M 1 disk
mmcblk1rpmb 179:96 0 4M 0 disk
Hello Neo2018,
It could be a hidden character called 'special characters'..or it could be something else..
Run this command, to see if it detect the disks..
Code:
openSeaChest_Basics --scanPlease, the part that says:
'Model Number' - Substitute last content after '-' by 'XXXXXX'
'Serial Number' - Substitute all by 'XXXXXXXX'
After that,
Paste output...it could be related to the pcie-controller, and this could be helpful, not only to you, but also to other users
RE: Tutorial[ Seagate Disks ]: Install Seagate OpenSeaChest Utilities - Neo2018 - 03-02-2019
(03-02-2019, 11:06 AM)tuxd3v Wrote: It could be a hidden character called 'special characters'..or it could be something else..>
Run this command, to see if it detect the disks..
Code:openSeaChest_Basics --scan
Code:
:~# openSeaChest_Basics --scan
==========================================================================================
openSeaChest_Basics - openSeaChest drive utilities - NVMe Enabled
Copyright (c) 2014-2018 Seagate Technology LLC and/or its Affiliates, All Rights Reserved
openSeaChest_Basics Version: 2.8.0-1_19_0 ARM
Build Date: Feb 28 2019
Today: Sat Mar 2 18:13:39 2019
==========================================================================================
open: Bad address
open failure
Error: 14 - Bad address
open: Bad address
open failure
Error: 14 - Bad address(03-02-2019, 11:06 AM)tuxd3v Wrote: Please, the part that says:IN OMV WEB/GUI INTERFACE
'Model Number' - Substitute last content after '-' by 'XXXXXX'
'Serial Number' - Substitute all by 'XXXXXXXX'
After that,
Paste output...it could be related to the pcie-controller, and this could be helpful, not only to you, but also to other users
![[Image: 2RXMK.jpg]](http://funkyimg.com/i/2RXMK.jpg)
Code:
smartctl 6.6 2016-05-31 r4324 [aarch64-linux-4.4.154-1132-rockchip-ayufan-g8260cd865508] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate IronWolf
Device Model: ST4000VN008-2DR166
Serial Number: ZDH36NNE
LU WWN Device Id: 5 000c50 0afc5c4f5
Firmware Version: SC60
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5980 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Mar 2 18:28:35 2019 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Disabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 591) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 636) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x50bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 080 064 044 - 100551871
3 Spin_Up_Time PO---- 094 094 000 - 0
4 Start_Stop_Count -O--CK 085 085 020 - 15686
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-- 088 060 045 - 631875942
9 Power_On_Hours -O--CK 091 091 000 - 8453 (229 242 0)
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 37
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 062 053 040 - 38 (Min/Max 24/41)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 090 090 000 - 21292
193 Load_Cycle_Count -O--CK 082 082 000 - 37230
194 Temperature_Celsius -O---K 038 047 000 - 38 (0 21 0 0 0)
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 1
240 Head_Flying_Hours ------ 100 253 000 - 3346 (16 125 0)
241 Total_LBAs_Written ------ 100 253 000 - 12977159047
242 Total_LBAs_Read ------ 100 253 000 - 38338985213
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x15 GPL R/W 1 SATA Rebuild Assist log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x24 GPL R/O 512 Current Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 24 Device vendor specific log
0xa2 GPL VS 8160 Device vendor specific log
0xa6 GPL VS 192 Device vendor specific log
0xa8-0xa9 GPL,SL VS 136 Device vendor specific log
0xab GPL VS 1 Device vendor specific log
0xb0 GPL VS 9048 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xc1 GPL,SL VS 16 Device vendor specific log
0xd1 GPL VS 136 Device vendor specific log
0xd2 GPL VS 10000 Device vendor specific log
0xd3 GPL VS 1920 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 8296 -
# 2 Short offline Completed without error 00% 8296 -
# 3 Short offline Completed without error 00% 6965 -
# 4 Short offline Completed without error 00% 6368 -
# 5 Short offline Completed without error 00% 6367 -
# 6 Short offline Completed without error 00% 6366 -
# 7 Short offline Completed without error 00% 6365 -
# 8 Short offline Completed without error 00% 6364 -
# 9 Short offline Completed without error 00% 6363 -
#10 Short offline Completed without error 00% 6362 -
#11 Short offline Completed without error 00% 6361 -
#12 Short offline Completed without error 00% 6360 -
#13 Short offline Completed without error 00% 6359 -
#14 Short offline Completed without error 00% 6358 -
#15 Short offline Completed without error 00% 6357 -
#16 Short offline Completed without error 00% 6356 -
#17 Short offline Completed without error 00% 6356 -
#18 Short offline Completed without error 00% 6354 -
#19 Short offline Completed without error 00% 6353 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 37 Celsius
Power Cycle Min/Max Temperature: 24/42 Celsius
Lifetime Min/Max Temperature: 21/47 Celsius
Under/Over Temperature Limit Count: 0/53
SCT Temperature History Version: 2
Temperature Sampling Period: 3 minutes
Temperature Logging Interval: 59 minutes
Min/Max recommended Temperature: 0/ 0 Celsius
Min/Max Temperature Limit: 0/ 0 Celsius
Temperature History Size (Index): 128 (56)
Index Estimated Time Temperature Celsius
57 2019-02-25 13:17 32 *************
58 2019-02-25 14:16 33 **************
59 2019-02-25 15:15 32 *************
... ..( 4 skipped). .. *************
64 2019-02-25 20:10 32 *************
65 2019-02-25 21:09 31 ************
66 2019-02-25 22:08 33 **************
67 2019-02-25 23:07 33 **************
68 2019-02-26 00:06 39 ********************
69 2019-02-26 01:05 42 ***********************
70 2019-02-26 02:04 36 *****************
71 2019-02-26 03:03 33 **************
72 2019-02-26 04:02 34 ***************
73 2019-02-26 05:01 35 ****************
... ..( 4 skipped). .. ****************
78 2019-02-26 09:56 35 ****************
79 2019-02-26 10:55 36 *****************
80 2019-02-26 11:54 35 ****************
81 2019-02-26 12:53 34 ***************
82 2019-02-26 13:52 34 ***************
83 2019-02-26 14:51 34 ***************
84 2019-02-26 15:50 35 ****************
85 2019-02-26 16:49 35 ****************
86 2019-02-26 17:48 34 ***************
87 2019-02-26 18:47 36 *****************
88 2019-02-26 19:46 35 ****************
89 2019-02-26 20:45 35 ****************
90 2019-02-26 21:44 34 ***************
91 2019-02-26 22:43 33 **************
92 2019-02-26 23:42 41 **********************
93 2019-02-27 00:41 40 *********************
94 2019-02-27 01:40 38 *******************
95 2019-02-27 02:39 34 ***************
96 2019-02-27 03:38 33 **************
97 2019-02-27 04:37 33 **************
98 2019-02-27 05:36 33 **************
99 2019-02-27 06:35 32 *************
... ..( 2 skipped). .. *************
102 2019-02-27 09:32 32 *************
103 2019-02-27 10:31 31 ************
104 2019-02-27 11:30 33 **************
105 2019-02-27 12:29 33 **************
106 2019-02-27 13:28 33 **************
107 2019-02-27 14:27 34 ***************
108 2019-02-27 15:26 35 ****************
109 2019-02-27 16:25 34 ***************
110 2019-02-27 17:24 34 ***************
111 2019-02-27 18:23 33 **************
112 2019-02-27 19:22 33 **************
113 2019-02-27 20:21 34 ***************
114 2019-02-27 21:20 35 ****************
115 2019-02-27 22:19 34 ***************
116 2019-02-27 23:18 33 **************
117 2019-02-28 00:17 37 ******************
118 2019-02-28 01:16 33 **************
119 2019-02-28 02:15 33 **************
120 2019-02-28 03:14 32 *************
... ..( 5 skipped). .. *************
126 2019-02-28 09:08 32 *************
127 2019-02-28 10:07 39 ********************
0 2019-02-28 11:06 41 **********************
1 2019-02-28 12:05 41 **********************
2 2019-02-28 13:04 41 **********************
3 2019-02-28 14:03 ? -
4 2019-02-28 15:02 24 *****
5 2019-02-28 16:01 32 *************
6 2019-02-28 17:00 32 *************
7 2019-02-28 17:59 32 *************
8 2019-02-28 18:58 31 ************
9 2019-02-28 19:57 33 **************
10 2019-02-28 20:56 38 *******************
11 2019-02-28 21:55 30 ***********
12 2019-02-28 22:54 34 ***************
13 2019-02-28 23:53 38 *******************
14 2019-03-01 00:52 31 ************
15 2019-03-01 01:51 35 ****************
16 2019-03-01 02:50 36 *****************
17 2019-03-01 03:49 36 *****************
18 2019-03-01 04:48 38 *******************
19 2019-03-01 05:47 34 ***************
20 2019-03-01 06:46 33 **************
21 2019-03-01 07:45 33 **************
22 2019-03-01 08:44 40 *********************
23 2019-03-01 09:43 33 **************
24 2019-03-01 10:42 40 *********************
25 2019-03-01 11:41 41 **********************
26 2019-03-01 12:40 30 ***********
27 2019-03-01 13:39 31 ************
28 2019-03-01 14:38 32 *************
29 2019-03-01 15:37 31 ************
30 2019-03-01 16:36 32 *************
31 2019-03-01 17:35 31 ************
32 2019-03-01 18:34 37 ******************
33 2019-03-01 19:33 39 ********************
34 2019-03-01 20:32 36 *****************
35 2019-03-01 21:31 32 *************
36 2019-03-01 22:30 32 *************
37 2019-03-01 23:29 32 *************
38 2019-03-02 00:28 33 **************
39 2019-03-02 01:27 32 *************
40 2019-03-02 02:26 33 **************
41 2019-03-02 03:25 35 ****************
42 2019-03-02 04:24 33 **************
43 2019-03-02 05:23 32 *************
... ..( 2 skipped). .. *************
46 2019-03-02 08:20 32 *************
47 2019-03-02 09:19 31 ************
48 2019-03-02 10:18 31 ************
49 2019-03-02 11:17 30 ***********
50 2019-03-02 12:16 38 *******************
51 2019-03-02 13:15 32 *************
52 2019-03-02 14:14 32 *************
53 2019-03-02 15:13 34 ***************
54 2019-03-02 16:12 34 ***************
55 2019-03-02 17:11 35 ****************
56 2019-03-02 18:10 34 ***************
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 37 --- Lifetime Power-On Resets
0x01 0x010 4 8453 --- Power-on Hours
0x01 0x018 6 12977158894 --- Logical Sectors Written
0x01 0x020 6 52184450 --- Number of Write Commands
0x01 0x028 6 38338972784 --- Logical Sectors Read
0x01 0x030 6 268830280 --- Number of Read Commands
0x01 0x038 6 - --- Date and Time TimeStamp
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 2280457129 N-- Spindle Motor Power-on Hours
0x03 0x010 4 2280457043 N-- Head Flying Hours
0x03 0x018 4 37230 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 0 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors
0x03 0x040 4 21293 --- Number of High Priority Unload Events
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 37 --- Current Temperature
0x05 0x010 1 33 --- Average Short Term Temperature
0x05 0x018 1 32 --- Average Long Term Temperature
0x05 0x020 1 47 --- Highest Temperature
0x05 0x028 1 0 --- Lowest Temperature
0x05 0x030 1 43 --- Highest Average Short Term Temperature
0x05 0x038 1 22 --- Lowest Average Short Term Temperature
0x05 0x040 1 37 --- Highest Average Long Term Temperature
0x05 0x048 1 28 --- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 70 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 12711 --- Number of Hardware Resets
0x06 0x010 4 12599 --- Number of ASR Events
0x06 0x018 4 1 --- Number of Interface CRC Errors
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 9 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS![[Image: 2RXNC.jpg]](http://funkyimg.com/i/2RXNC.jpg)
![[Image: 2RXND.jpg]](http://funkyimg.com/i/2RXND.jpg)
please tell me the console / terminal commands, for more output