Tutorial[ Seagate Disks ]: Install Seagate OpenSeaChest Utilities

[tuxd3v]

Code:

:~# lsblk
NAME         MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda            8:0    0 465.8G  0 disk
`-sda1         8:1    0 465.8G  0 part /srv/dev-disk-by-label-Daten2
sdb            8:16   0   3.7T  0 disk
`-sdb1         8:17   0   3.7T  0 part /srv/dev-disk-by-label-Daten
mtdblock0     31:0    0     4M  0 disk
mtdblock1     31:1    0    32K  0 disk
mtdblock2     31:2    0   256K  0 disk
mmcblk1      179:0    0  57.6G  0 disk
|-mmcblk1p1  179:1    0   3.9M  0 part
|-mmcblk1p2  179:2    0    64K  0 part
|-mmcblk1p3  179:3    0     4M  0 part
|-mmcblk1p4  179:4    0     4M  0 part
|-mmcblk1p5  179:5    0     4M  0 part
|-mmcblk1p6  179:6    0   112M  0 part /boot/efi
`-mmcblk1p7  179:7    0  57.5G  0 part /
mmcblk1boot0 179:32   0     4M  1 disk
mmcblk1boot1 179:64   0     4M  1 disk
mmcblk1rpmb  179:96   0     4M  0 disk

Where is the mistake?

Hello Neo2018,
It could be a hidden character called 'special characters'..or it could be something else..

Run this command, to see if it detect the disks..

Code:

openSeaChest_Basics --scan

Please, the part that says:
'Model Number' - Substitute last content after '-' by 'XXXXXX'
'Serial Number'  - Substitute all by 'XXXXXXXX'

After that,
Paste output...it could be related to the pcie-controller, and this could be helpful, not only to you, but also to other users