Tutorial[ Seagate Disks ]: Install Seagate OpenSeaChest Utilities

[Neo2018]

or you can also do it for your session with:

Code:

export PATH="${PATH}:/opt/openSeaChest/bin"

Then type 'open' + <TAB>

Ok that works now.

Code:

:~# open
openSeaChest_Basics        openSeaChest_FormatUnit    openSeaChest_NVMe          openssl
openSeaChest_Configure     openSeaChest_GenericTests  openSeaChest_PowerControl  openvpn
openSeaChest_Erase         openSeaChest_Info          openSeaChest_SMART
openSeaChest_Firmware      openSeaChest_Logs          openSeaChest_ZBD

But >

Code:

:~# openSeaChest_Basics --deviceInfo --device /dev/sdb
==========================================================================================
openSeaChest_Basics - openSeaChest drive utilities - NVMe Enabled
Copyright (c) 2014-2018 Seagate Technology LLC and/or its Affiliates, All Rights Reserved
openSeaChest_Basics Version: 2.8.0-1_19_0 ARM
Build Date: Feb 28 2019
Today: Sat Mar  2 11:38:54 2019
==========================================================================================
open: Bad address
open failure
Error: 14 - Bad address
Error: Could not open handle to /dev/sdb

Error ! ? Why, how so?

In the error you report..."wrong channel", that its strange, could be anny special char in the between..
when you do 
Code:

Code:

lsblk

 What appears in your NAS box?

Code:

:~# lsblk
NAME         MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda            8:0    0 465.8G  0 disk
`-sda1         8:1    0 465.8G  0 part /srv/dev-disk-by-label-Daten2
sdb            8:16   0   3.7T  0 disk
`-sdb1         8:17   0   3.7T  0 part /srv/dev-disk-by-label-Daten
mtdblock0     31:0    0     4M  0 disk
mtdblock1     31:1    0    32K  0 disk
mtdblock2     31:2    0   256K  0 disk
mmcblk1      179:0    0  57.6G  0 disk
|-mmcblk1p1  179:1    0   3.9M  0 part
|-mmcblk1p2  179:2    0    64K  0 part
|-mmcblk1p3  179:3    0     4M  0 part
|-mmcblk1p4  179:4    0     4M  0 part
|-mmcblk1p5  179:5    0     4M  0 part
|-mmcblk1p6  179:6    0   112M  0 part /boot/efi
`-mmcblk1p7  179:7    0  57.5G  0 part /
mmcblk1boot0 179:32   0     4M  1 disk
mmcblk1boot1 179:64   0     4M  1 disk
mmcblk1rpmb  179:96   0     4M  0 disk

Where is the mistake?