01-07-2019, 06:02 AM
Had an off-the-wall thought - presume you do not have an eMMC? If you do, remove it as it has boot preference. (Or it is perfectly possible to flash an image to it as per this thread.)
In any event, jumper the eMMC and SPI to prevent them interfering with an SDcard boot. Arguably in a previous life someone messed with the SPI on your board.
In any event, jumper the eMMC and SPI to prevent them interfering with an SDcard boot. Arguably in a previous life someone messed with the SPI on your board.
- PinePhone BraveHeart now v1.2b 3/32Gb daily driver, Tow-boot with pmOS/SXMO on eMMC
- PinePhone pmOS Community Edition 2/16Gb driving my picture frame, Tow-boot with pmOS/SXMO on eMMC
- PinePhone Pro Explorer Edition, Tow-boot on SPI, Arch/SXMO on eMMC
- ROCKPro64 v2.1 2GB, 16Gb eMMC retired in favour of a fruity upgrade