Hardware issue overheating while booting and fail to boot
#13
(08-23-2018, 01:43 PM)DIDquest Wrote: 2. I used the top USB 2.0 port, but I will try it again with the type c connector just in-case

Just trying to digest bits of the schematic and it seems to me the 2 OTG ports are connected to the  2 USB3 bits - the USB C and the standard USB-A above it. I do not have a USB-A/USB-A cable so cannot test - if you can check and feedback but methinks the wiki will need a correction.

Fab thermal images Cool
  • PinePhone BraveHeart now v1.2b 3/32Gb daily driver, Tow-boot with pmOS/SXMO on eMMC
  • PinePhone pmOS Community Edition 2/16Gb driving my picture frame, Tow-boot with pmOS/SXMO on eMMC
  • PinePhone Pro Explorer Edition, Tow-boot on SPI, Arch/SXMO on eMMC
  • ROCKPro64 v2.1 2GB, 16Gb eMMC retired in favour of a fruity upgrade


Messages In This Thread
RE: Hardware issue overheating while booting and fail to boot - by dukla2000 - 08-27-2018, 03:47 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  (real) Mainline U-boot finally works on SPI, boots SATA, throw away your SD cards NOW aleksei 0 584 06-21-2025, 06:21 AM
Last Post: aleksei
  enble boot after power loss/restore dkebler 18 16,697 12-04-2023, 12:14 PM
Last Post: ok38
  Mainline U-Boot with SPI, NVMe and SATA boot support sigmaris 108 166,573 09-25-2023, 12:46 AM
Last Post: ChriChri
Bug Broken boot: What am I missing? mkosarek 1 1,646 09-08-2023, 08:14 AM
Last Post: wdt
  Unable to boot Armbian on new RockPro64 mooseball 5 6,881 07-14-2023, 08:59 AM
Last Post: rockjonn
  no boot white led flashing moserwi 7 7,466 05-18-2023, 10:46 AM
Last Post: wdt
  Hardware fix for software sound problem on Rockpro64 Ricks Rockpro 0 1,659 04-06-2023, 03:59 PM
Last Post: Ricks Rockpro
  u-boot locked on pine64pro ljones 1 2,447 09-06-2022, 10:32 AM
Last Post: ljones
  Cannot get my board to boot deutschlmao 11 12,848 09-05-2022, 04:23 PM
Last Post: ljones
  U-BOOT Tutorial hazz 0 1,797 07-19-2022, 10:48 PM
Last Post: hazz

Forum Jump:


Users browsing this thread: 1 Guest(s)