PCIe -> SATA and NVMe work as of 0.6.59

[pfeerick]

My NVMe drive still isn't being picked up, but neither was the PCI sata card on the first boot with mainline... so I'm going to try again and reboot a few times. Edit: It still doesn't seem to like me - either NVMe is still not completely stable, drive's faulty or not compatible, or something else.... It's a new el-cheapo M.2 2280, and does seem to do something on startup, but I get the following in dmesg and it don't work.

Code:

[ 7.624204] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout! [ 7.625029] rockchip-pcie: probe of f8000000.pcie failed with error -110

In the meantime, here are some results for a random 1.5TB Seagate 'Green' drive on the PCI SATA card on mainline 4.18 ... as I had nothing but lockups, endless "ata2: hard resetting link" loops and "cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2" errors with the 4.4 kernel.

Code:

                                                             random    random     bkwd    record    stride                                                  kB  reclen    write  rewrite    read    reread    read     write     read   rewrite      read   fwrite frewrite    fread  freread          102400       4    27191    31454    35270    36355      662      923                                                                    102400      16    60049    69537    62676    75448     2603     3504                                                                    102400     512   107696   109266   114872   115728    43650    66147                                                                    102400    1024   109415   103687   119136   119073    65168    83687                                                                    102400   16384   105158   112524   121737   125382   111152   102903                                                          

Full iozone output and lspci output here