I have been using my Pinebook just fine for several months and yesterday it did something odd. The screen appeared to have interference like you were looking at it thru a screen door. At the same time I noticed the current temp was missing from the clock area in the upper right (I am using the latest version of Mate). So I restarted it, but it never came back after the restart. I had been using it plugged in and the battery was over 70% charged when this happened.
I can long press the power button and force it off. I have powered it back on and the green power led comes on, it appears the back light to the screen comes on, but that's it, no Pinebook boot-up screen or anything. I thought maybe the install got hosed up so I tried to boot-up from MicroSD, but it won't do that either. I pulled the back off and disconnected the battery for a while, plugged it back in and same results. I tried this several times. Also I carefully re-seated the cable connectors on the mainboard and re-seated the EMMC itself.
I left it powered off and unplugged over night. Plugged it in this morning and the red led by the power connector came on for a while. After about 2 hours I tried to power it on and the same thing happened. It looks like it will be powering up as the back light for the screen comes on and the green led comes on. but nothing ever happens after that. No Pinebook boot-up screen or anything.
Did my Pinebook die?
Thanks in advance for the advice.
I can long press the power button and force it off. I have powered it back on and the green power led comes on, it appears the back light to the screen comes on, but that's it, no Pinebook boot-up screen or anything. I thought maybe the install got hosed up so I tried to boot-up from MicroSD, but it won't do that either. I pulled the back off and disconnected the battery for a while, plugged it back in and same results. I tried this several times. Also I carefully re-seated the cable connectors on the mainboard and re-seated the EMMC itself.
I left it powered off and unplugged over night. Plugged it in this morning and the red led by the power connector came on for a while. After about 2 hours I tried to power it on and the same thing happened. It looks like it will be powering up as the back light for the screen comes on and the green led comes on. but nothing ever happens after that. No Pinebook boot-up screen or anything.
Did my Pinebook die?
Thanks in advance for the advice.
