12-03-2017, 12:47 AM
So I would use rk3328_miniloader_v2.43.bin from https://github.com/rockchip-linux/rkbin/...aster/rk33 as the SPL at 0x40 (stage 2), and my own built u-boot.bin at 0x4000 (stage 3)?
Do I need trust.img at 0x6000 as well, and if so, where do I get that? (Will that work with my own u-boot.bin? I'm not familiar how the ARM Trusted Firmware stuff works, can I boot without a signed bootloader?)
Boot stages as described at http://opensource.rock-chips.com/wiki_Bo...#Boot_flow
Do I need trust.img at 0x6000 as well, and if so, where do I get that? (Will that work with my own u-boot.bin? I'm not familiar how the ARM Trusted Firmware stuff works, can I boot without a signed bootloader?)
Boot stages as described at http://opensource.rock-chips.com/wiki_Bo...#Boot_flow