07-11-2017, 05:31 AM
(07-11-2017, 05:24 AM)MarkHaysHarris777 Wrote:(07-11-2017, 05:22 AM)falcon15500 Wrote: Okay, so I am an idiot...
For anyone else who is having the same issues, the script:
/usr/local/sbin/pine64_remove_boot0.sh <device>
where <device> is your SDcard (eg: /dev/mmcblk1)
will stop the PB from trying to boot into the SDCard.
So now I can leave the SD inserted and it boots right into the eMMC.
M.
You should remove the SD card from the Rock64 if you're going to boot from the eMMC; the bootup will get confused between the two; true. But the worst of it from a maker standpoint is that the lower PI-2 bus gpio pins (blue bank, gpio1) are not available if you have the SD card plugged in.
Well I am on a Pinebook, so that's not really my biggest concern. After I run the above script, it all works well.
M.
