(ARCHIVED) Ubuntu Xenial Image (BSP Kernel)

[longsleep]

I also built a mimimal Ubuntu image combined with the the BSP Kernel and my image building gear. Similar to the Arch Image **this image is intended for developers. If you are looking for accelerated 2D/3D or video decoding use Android** and do not bother with trying this image.

What you get:

- HDMI at 1080P
- HDMI analog audio (alsa, pulseaudio)
- Ethernet (including 1000M)
- USB
- Wifi
- Ubuntu Ubuntu 16.04 (Xenial Xerus) aarch64
- BSP Linux Kernel 3.10.65+ (see http://forum.pine64.org/showthread.php?tid=293)
- BSP U-Boot (see http://forum.pine64.org/showthread.php?tid=99)
- Support for all Pine64 models (512MB, 1GB, 2GB) with auto detection so Ethernet works with the same image on all models

It works good enough so it can be used as headless server, as compile platform for aarch64 or as virtualization host. You can even install a desktop environment if you wish.

These images require a 4GB medium (3700 MiB rootfs). Extend the partition with `sudo /usr/local/sbin/resize_rootfs`.

Download (for instructions see README.txt)

Starting with Kernel 3.10.101 it is possible to lower HDMI resolution from 1080p to 720p. See http://forum.pine64.org/showthread.php?tid=980 for instructions.

History:

**20160228-2**
- Initial publish release
- Known issue: console-setup.service fails to start
- Firefox is very unstable

**20160306-1**
- Updated U-Boot and device tree to 20160306-1
- Updated Kernel to 3.10.65-2-pine64-longsleep-39-1
- Ethernet MAC address is now persistent (added to uEnv.txt on first boot)
- Added system service to reenable CPU cores
- Added helper Pine64 platform scripts to /usr/local/sbin
- Serial getty no longer waits on rc.local service
- Linux Kernel firmware and headers are now installed

**20160320-1**
- Added support for Pine64 512MB model (auto detected)
- Updated U-Boot and device trees to 20160319-1 (2014.07-3-pine64-longsleep)
- Updated Kernel to 3.10.65-3-pine64-longsleep-2
- Wireless tools are now installed by default (iw, rfkill, wpasupplicant)

**20160403-1**
- Updated Kernel to 3.10.65-4-pine64-longsleep-16 (fixing Pine64+ 2GB model Ethernet crash)

**20160424-1**
- Updated U-Boot and device trees to 20160423-1 (v2014.07-4-pine64-longsleep)
- Updated to Kernel 3.10.65-7-pine64-longsleep-28
- Initrd updated to support root= Kernel parameter and wait for rootfs delay (thanks to j0zzy)
- Ubuntu rootfs updated to 16.04 Xenial Xerus final release
- Platform scripts were updated to latest
- Mackeeper service was updated (thanks to sWski)
- UART2, UART3 and UART4 are now enabled (thanks to Martin Ayotte)

**20160507-1**
- Updated to Kernel 3.10.101-0-pine64-longsleep-39
- Alsa-utils are now installed by default, including sane mixer settings
- It is now possible to change the HDMI resolution via uEnv.txt (sunxi-disp-tool installed by default)
- Default hostname is now "pine64"
- Locale en_US.UTF-8 is now pre-generated

**20160716-1**
- Updated to Kernel 3.10.102-2-pine64-longsleep-66

**20161217-1**
- Updated to Kernel 3.10.104-2-pine64-longsleep-113
- Backports repository no longer enabled by default

**20161218-1**
- Ubuntu 16.04.1 base rootfs without proposed repository (was nightly before)
- Proposed repository no longer enabled by default


Released images are signed with a detached GPG signature (.asc) signed by my personal key 0x090EF0DB. Get the key and verify that the download is intact and unmodified.

Code:

gpg --keyserver keyserver.ubuntu.com --recv-keys 090EF0DB
gpg --with-fingerprint xenial-pine64-*.xz.asc

Let me know what you think.